Samsung RF4287HAWP User Manual (user Manual) (ver.0.3) (English) - Page 19
Adjusting the frezer drawer level, with a Phillips screwdriver+.
UPC - 036725569683
View all Samsung RF4287HAWP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
01 setting up Setting up your French Door Refrigerator Adjusting the freezer drawer level Adjustment part 1. Locate the height-adjuster ( 1 ) in the freezer drawer. Unscrew the 8 Phillips screws ( 2 ) slightly to loosen the door. 1 2 Freezer Drawer 2. Loosen the controller screw ( 3 ) with a Phillips screwdriver(+). 3 3. Find the best level to align the door slope. • After adjustment, tighten the controller screw ( 3 ) and then philips screws. Example) The slope is about 0.08inch (2mm) as shown below. - Rotate the height adjuster to -2.0 to reduce the door slope. Slope Reference plane setting up _19
setting up
_19
01 SETTING UP
Setting up your French Door Refrigerator
ADJUSTING THE FREEZER DRAWER LEVEL
1.
Locate the height-adjuster (
1
) in the freezer drawer.
Unscrew the 8 Phillips screws (
2
) slightly to loosen the door.
2.
Loosen the controller screw (
3
) with a Phillips screwdriver(+).
3.
Find the best level to align the door slope.
•
After adjustment, tighten the controller screw (
3
) and then philips screws.
1
2
3
Example) The slope is about 0.08inch (2mm) as shown below.
- Rotate the height adjuster to -2.0 to reduce the door slope.
Slope
Reference
plane
Freezer Drawer
Adjustment part