Samsung RFG238AARS User Manual (user Manual) (ver.0.5) (English) - Page 23

02 OPERATING Energy saver This icon will light up when you press the Energy Saver button. The Energy Saver function is automatically set to "ON" when power is supplied to the refrigerator. If condensation occurs on the doors, turn the Energy Saver mode off. Lighting This icon will light up when you press the Lighting button. In this case, the dispenser light(under the display) will be on constantly. If you would like the dispenser light to come on only when using the dispenser, turn the Lighting mode off. Alarm This icon will light up when you press the Alarm button. The door alarm will sound if any door is open for more than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on. Ice off This icon will light up when you press the "Ice Off" button. In this case, the ice will not be produced. Lock This icon will light up when you press the Lock button. In this case, you won't be able to use the control panel. If you press and hold the Ice Off/Hold button for 3 sec to unlock Child Lock, you will be able to use the control panel again. CONTROLLING THE TEMPERATURE Basic temperature of Freezer and Refrigerator Compartments The basic temperature and/or recommended temperatures of the freezer and refrigerator Compartments are -2°F and 38°F respectively. If the temperature of freezer and fridge Compartments are too high or low, adjust the temperature manually. Controlling the Freezer temperature The freezer temperature can be set between 8°F and -8°F to suit your particular needs. Press the freezer button repeatedly until the desired temperature is shown in the temperature display. The temperature will move 2°F degrees each push (-2°F → -4°F → -6°F → -8°F → 8°F → 6°F → 4°F → 2°F → 0°F → -2°F). Keep in mind that foods like ice cream may melt at 4°F. The temperature display will move sequentially from -8°F to 8°F. Five seconds after the new temperature is set, the display will show the actual current freezer temperature until the new temperature is reached. Using the Power Freeze If you need a lot of ice or if you want to cool down the freezer faster, you can use the Power Freezer function. Press and hold the Freezer/ Hold 3 sec for Power Freezer button for 3 seconds. Then, the power freeze indicator will light and activate the power freeze mode independent of the freezer set temperature. If you select Power freeze, the inside temperature of the freezer will decrease for about two and a half hours. When you have enough ice, just press and hold the button for 3 seconds again to cancel the Power Freeze mode. Then, the indicator will go out and the freezer will return to the set temperature again. Operating _23