Samsung RS2533SW Quick Guide (easy Manual) (ver.1.0) (English) - Page 27

Installationof The Water Dispenser Line

Page 27 highlights

INSTALLATION OF THE WATER DISPENSER LINE Connect the water tube to the refrigerator. 1) Connect to the 3/16" white plastic tube on the back of the refrigerator. 2) Slip the compression nut onto the white plastic tube. 3) Screw the union into the white plastic tube and tighten the compression nut. Do not overtighten the compression nut. NOTE 4) Silp the compression sleeve and compression nut on copper tubing as shown. Tighten the comperssion nut onto the union. 5) Turn water on and check for any leakege. Nut Union Sleeve Nut Waterline must be connected to potable water only NOTE Install the water filter. 1) As shown, the fixed cap separate in the refrigerator by rotating it counterclockwise. Remove the water filter from the box and put a month indicator sticker on the filter as shown. 2) Write the month you installed the filter on the label. EX) If the water filter was installed in March, put "MAR" 3) Remove the protective cap then position and insert the filter as ishown. 4) Slowly turn the water filter clockwise 90º to align the indication mark on the cover, locking the filter in posi tion. Do not overtighten. SEPARATION OF RED CAP COVER FILTER STICKER (MONTH INDICATION) Please check that the indication line aligns with the lock position. NOTE 27 ALIGN THE INDICATION MARK WITH LOCK POSITION.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

27
INSTALLATIONOF THE WATER DISPENSER LINE
1) Connect to the 3/16” white plastic tube on the back of the
refrigerator.
2) Slip the compression nut onto the white plastic tube.
3) Screw the union into the white plastic tube and tighten the
compression nut.
SEPARATION
OF RED CAP
STICKER
(MONTH INDICATION)
COVER FILTER
ALIGN THE INDICATION MARK
WITH LOCK POSITION.
1) As shown, the fixed cap separate in the refrigerator by rotating it
counterclockwise.
Remove the water filter from the box and put a month indicator
sticker on the filter as shown.
2) Write the month you installed the filter on the label.
EX) If the water filter was installed in March, put “MAR”
3) Remove the protective cap then position and insert the
filter as ishown.
4) Slowly turn the water filter clockwise 90º to align
the indication mark on the cover, locking the filter in posi
tion. Do not overtighten.
Please check that the indication line aligns with the lock position.
Connect the water tube to the
refrigerator
.
Install the water filter.
Waterline must be connected to potable water only
NOTE
NOTE
Do not overtighten the compression nut.
NOTE
4) Silp
the compression sleeve and
compression nut on copper
tubing as shown. Tighten the comperssion nut onto the union.
5) Turn water on and check for any leakege.
Nut
Union
Sleeve
Nut