Samsung RS257BARB Quick Guide (easy Manual) (ver.1.0) (English) - Page 7

Temperature Control, Ice And Cold Water Dispenser - reset

Page 7 highlights

OPERATING INSTRUCTIONS TEMPERATURE CONTROL Freezer • The freezer temperature can be set between 8°F and -14°F. • Press the Freezer button repeatedly until the desired set temperature is shown in the temperature display. • The temperature display changes in sequence between 8°F and -14°F. When the display reaches 8°F, it returns to -14°F. • After five seconds, the display reverts to the actual freezer temperature, which changes as the freezer reaches the new temperature. Refrigerator • The refrigerator temperature can be set between 46°F and 34°F. • Press the Fridge button repeatedly until the desired temperature is shown in the temperature display. • The temperature display changes in sequence and reverts in the same way as the freezer. • When ice cream is stored above 4°F in freezer, it may melt. • The temperature of the freezer or the refrigerator rises from frequent openings and from warm WARNING food. This may cause the digital display to blink . The digital display will stop blinking when the freezer and refrigerator return to the normal temperature. If does not reset temp, unplug fridge, wait 9 min and replug in. ICE and COLD WATER DISPENSER Press the Ice Type button to select the type of ice: • Cubed ice • Crushed ice • No ice No ice Water Dispenser The capacity of the water tank is approximately 0.3 gal. Cold Water • Push the water dispenser lever with a cup. • If you have just installed the refrigerator or installed a new water filter, throw away the first six glassfuls of water or until water flows cleanly to flush out impurities in the water supply system. If the Ice remains in the Ice bucket, cubed ice is obtained. Ice stays in cube Push NOTE form and is crushed when the Crushed ice button is pressed. Push the ice dispenser lever with a cup. • Place a cup in line with the dispenser to prevent If you have a long period of time (long the ice from jumping out. vacation or business trip) and won' t use CAUTION the water or ice dispensers, close the water valve and shut off the water supply to the refrigerator. Otherwise, water leak- Push age may occur. Never put fingers or any other objects in the NOTE dispenser opening to avoid injury. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Press the Ice Type button to select the type
of ice:
Cubed ice
Crushed ice
No ice
Push the ice dispenser lever with a cup.
Place a cup in line with the dispenser to prevent
the ice from jumping out.
7
OPERATING INSTRUCTIONS
ICE and COLD WATER DISPENSER
Water Dispenser
The capacity of the water tank is approximately 0.3 gal.
Cold Water
Push the water dispenser lever with a cup.
If you have just installed the refrigerator or
installed a new water filter, throw away the first six
glassfuls of water or until water flows cleanly to
flush out impurities in the water supply system.
Never put fingers or any other objects in the
dispenser opening to avoid injury.
If you have a long period of time (long
vacation or business trip) and won’ t use
the water or ice dispensers, close the
water valve and shut off the water supply
to the refrigerator. Otherwise, water leak-
age may occur.
Push
Push
CAUTION
TEMPERATURE CONTROL
Freezer
The freezer temperature can be set between
8°F and -14°F.
Press the
Freezer
button repeatedly until the desired
set temperature is shown in the temperature display.
The temperature display changes in sequence
between 8°F and -14°F.When the display reaches
8°F, it returns to -14°F.
After five seconds, the display reverts to the actual
freezer temperature, which changes as the freezer
reaches the new temperature.
Refrigerator
The refrigerator temperature can be set between
46°F and 34°F.
Press the
Fridge
button repeatedly until the desired
temperature is shown in the temperature display.
The temperature display changes in sequence and
reverts in the same way as the freezer.
When ice cream is stored above 4°F in freezer, it may melt.
The temperature of the freezer or the refrigerator rises from frequent openings and from warm
food.This may cause the digital display to blink .The digital display will stop blinking when the
freezer and refrigerator return to the normal temperature.
WARNING
No ice
NOTE
NOTE
If does not reset temp, unplug fridge, wait 9 min and replug in.
If the Ice remains in the Ice bucket,
cubed ice is obtained. Ice stays in cube
form and is crushed when the Crushed
ice button is pressed.