Samsung RS265LABP Quick Guide (easy Manual) (ver.1.0) (English) - Page 27
Installation Of The Water Dispenser Line
View all Samsung RS265LABP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
INSTALLATION OF THE WATER DISPENSER LINE Connect the water line to the refrigerator. 1) Slip the compression nut through the provided plastic tubing. 2) Tighten the compression nut onto 1/4" comprression fitting. Refrigerator Ferrule (Purchased) Compression Nut (1/4 (Provided) Do not overtighten the compression nut. NOTE Using Copper Tubing - Slip the compression nut and ferrule on copper tubing as shown. Using Plastic Tubing - Insert the molded end of the plastic tubing into the compression fitting. 3) Tighten the compression nut onto the compression fitting. 4) Turn water on and check for any leakage. Compression Fitting (Provided) Compression Nut (1/4 (Purchased) Copper Tubing (Purchased) Plastic Tubing (Purchased) Household Water Line Water line must be connected to drinkable water only. NOTE Cut off 1/4 inch of the provided plastic tubing squarely to prevent leaks when reconnect. Install the water filter. 1) As shown, the fixed cap separates from the refrigerator by rotating it counterclockwise. Remove the water filter from the box and put a month indicator stick on the filter as shown. Keep the cap(A) in a safe place for recapping, when you NOTE don't use the filter. 2) If the water filter was installed in March, put on the "SEP" sticker. 3) Remove the protective cap then position and insert the filter as shown. 4) Slowly turn the water filter clockwise 90º to align the indication mark on the cover, locking the filter in position. Do not overtighten. SEPARATION OF RED CAP (A) COVER FILTER INSTALLATION INSTRUCTIONS STICKER (MONTH INDICATION) Please check that the indication line aligns with the lock position. NOTE 27 ALIGN THE INDICATION MARK WITH LOCK POSITION.