Samsung RS267LASH Quick Guide (easy Manual) (ver.1.0) (English) - Page 25

ADJUSTING THE CLEARANCE BETWEEN THE DOORS Adjust Leveling first. NOTE Making small adjustments between doors. If the door of the freezer is lower than that of the refrigerator. If the door of freezer is higher than that of the refrigerator. INSTALLATION INSTRUCTIONS Adjustment part Please open the doors and adjust them as follows: 1) Release the nut (①) on the lower hinge until it reaches the upper end of the bolt (➁). Adjustment part When you release the nut(①), use enclosed hex wrench (➂) to turn the bolt(➁) in a slightly NOTE counterclockwise direction. This will enable you to loosen the nut(①) with your fingers. ➂ WRENCH ➂ WRENCH ➀ NUT ➁ BOLT ➀ NUT ➁ BOLT 2) Please adjust the height difference between the doors by turning the bolt (➁) clockwise ( clockwise ( ). ) or counter When you turn clockwise ( NOTE ), the door goes up. ➂ WRENCH ➂ WRENCH ➀ NUT ➁ BOLT ➀ NUT ➁ BOLT 3) After adjusting the doors, turn the nut in clockwise ( ) until it reaches the lower end of the bolt, then tighten the bolt again with the wrench (➂) to fix the nut(①). ➂ WRENCH ➂ WRENCH ➀ NUT ➁ BOLT ➀ NUT ➁ BOLT If you do not fix the nut (①)firmly, the bolt (➁) may be released. NOTE 25