Samsung RS267LBSH Quick Guide (easy Manual) (ver.1.0) (English) - Page 25
Adjusting The Clearance Between The Doors
View all Samsung RS267LBSH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
ADJUSTING THE CLEARANCE BETWEEN THE DOORS Adjust Leveling first. NOTE Making small adjustments between doors. If the door of the freezer is lower than that of the refrigerator. If the door of freezer is higher than that of the refrigerator. INSTALLATION INSTRUCTIONS Adjustment part Adjustment part Please open the doors and adjust them as follows: 1) Release the nut (①) on the lower hinge until it reaches the upper end of the bolt (➁). When you release the nut (①), use enclosed hex wrench (➂) to turn the bolt(➁) in a slightly NOTE counterclockwise direction. This will enable you to loosen the nut(①) with your fingers. ➂ WRENCH ➂ WRENCH ➀ NUT ➁ BOLT ➀ NUT ➁ BOLT 2) Please adjust the height difference between the doors by turning the bolt (➁) clockwise ( clockwise ( ). ) or counter When you turn clockwise ( NOTE ), the door goes up. ➂ WRENCH ➂ WRENCH ➀ NUT ➁ BOLT ➀ NUT ➁ BOLT 3) After adjusting the doors, turn the nut clockwise ( ) until it reaches the lower end of the bolt, then tighten the bolt again with the wrench (➂) to fix the nut(①). ➂ WRENCH ➂ WRENCH ➀ NUT ➁ BOLT ➀ NUT ➁ BOLT If you do not fix the nut (①)firmly, the bolt (➁) may be released. NOTE 25