Samsung RS275ACBP User Manual (ENGLISH) - Page 17
Installation Of The Refrigerator, Installation Instructions - dimensions
UPC - 036725589537
View all Samsung RS275ACBP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
INSTALLATION OF THE REFRIGERATOR Checking the Dimensions of your Entrance Door Check the dimensions of your entrance door to determine whether the refrigerator can pass through it. Dimension (inches) Model Capacity (Cu. Ft) Width Case Height Depth without Hinge with Hinge with door without door RS275 / RS277 26 1/2 35 7/8 68 1/2 70 33 13/16 30 1/2 Selecting the Location for the Refrigerator • Select a location with easy access to the water supply. • Select a location with enough space for the refrigerator. • Select a location which is not exposed to sunlight. • Select a location with level floor. NOTE • Before disassembling the freezer door, the water supply line needs to be disconnected. (If not, the water supply line can be damaged.) • See "Separating the water supply line from the refrigerator" on the next page. Allow sufficient space to circulate the air in the internal cooling system. • If the refrigerator does not have enough space, the internal cooling system may not work correctly. 2inches NOTE Allow clearance to the right, left, back and the top when installing the refrigerator. This has the advantage of reducing power consumption. Do not install the refrigerator where the temperature will go below 50°F(10°C). 0.1inch 2 inches How to assemble the separable door handle - Make sure the "UP" mark on the rear of the handle is facing right side up. - Match the upper and lower Handle Locking Tabs on the doors to the handles. Fix the handles to the doors by sliding them down firmly. - Check the installation of the handles by pulling them. - If the handles are inserted properly, they should not move. INSTALLATION INSTRUCTIONS 17