Samsung RT21M6215SR User Manual - Page 22

Installing a Water Filter optional, fully inserted, insert and tighten the filter cartridge.

Page 22 highlights

Installation Installation Installing a Water Filter (optional) The water filter and the water filter installation kit containing necessary parts illustrated in this section are not provided. You must purchase the water filter and the water filter installation kit at a local hardware store. To connect to the water supply line 01 07 02 03 06 05 04 09 01 Cold water line 02 Pipe clamp 03 Plastic line 04 Compression nut 05 Compression sleeve 06 Packing nut 07 Shut off valve 08 Filter cartridge 09 Cartridge holder 10 Cut vertically by 90 degrees 08 10 1. Shut off the main water line and turn the ice maker off. 2. Locate the nearest cold potable water line. 3. Follow the instructions mentioned in the water filter installation kit. 4. After connecting the water line to the inlet of the cartridge holder with the plastic line fully inserted, insert and tighten the filter cartridge. 5. Turn on the water line and flush 11 liters of water (approximately 6 minutes) through the filter before use. CAUTION • The water line must be connected outside of the refrigerator. • Do not use copper lines. • If cutting the tubing for resizing, make sure the ends of the tubing are vertically clean cut. 22 English Untitled-4 22 2020-03-17 7:03:19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192

Installation
English
22
Installation
Installing a Water Filter (optional)
The water filter and the water filter installation kit containing necessary parts illustrated
in this section are not provided. You must purchase the water filter and the water filter
installation kit at a local hardware store.
To connect to the water supply line
01
02
03
07
06
05
04
09
10
08
01
Cold water line
02
Pipe clamp
03
Plastic line
04
Compression nut
05
Compression sleeve
06
Packing nut
07
Shut off valve
08
Filter cartridge
09
Cartridge holder
10
Cut vertically by 90 degrees
1.
Shut off the main water line and turn the ice maker off.
2.
Locate the nearest cold potable water line.
3.
Follow the instructions mentioned in the water filter installation kit.
4.
After connecting the water line to the inlet of the cartridge holder with the plastic line
fully inserted, insert and tighten the filter cartridge.
5.
Turn on the water line and flush 11 liters of water (approximately 6 minutes) through
the filter before use.
CAUTION
The water line must be connected
outside of the refrigerator.
Do not use copper lines.
If cutting the tubing for resizing, make
sure the ends of the tubing are vertically
clean cut.
Untitled-4
22
2020-03-17
°° 7:03:19