Samsung S1050 User Manual (ENGLISH) - Page 89

Setting up the application software 3. After restarting the computer, connect the PC to the camera with the USB cable. 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognise the camera. ※ If your OS is Windows XP, an image viewer program will open. If the download window of Digmax Master opens after starting Digimax Master, the camera driver was set up successfully. INFORMATION ● If you have installed the camera driver, the [Found New Hardware Wizard] may not open. ● On a Windows 98 SE system, the Found New Hardware Wizard dialog box opens and a window asking you to select a driver file may appear. In this case, specify "USB Driver" in the CD supplied. (for Windows 98 SE). ● PDF documents of user manual are included in the Software CD-ROM supplied with this camera. Search the PDF files with Window's explorer. Before opening the PDF files, you must install the Adobe Reader included in the Software CD-ROM. ● To install the Adobe Reader 6.0.1 correctly, Internet Explorer 5.01 or later had to be installed. Visit "www.microsoft.com" and upgrade the Internet Explorer. Starting PC mode •If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode". •In this mode, you can download stored images to your PC through the USB cable. ■ Camera settings for connection 1. Turn on the camera 2. Connect the camera and computer with the supplied USB cable. 3. Turn on the computer. The camera and computer are connected. 4. External device selection menu will display on the LCD monitor. 5. Select the [Computer] by pressing the Up / Down button and press the OK button. Select USB Computer Printer OK Confirm 《88》