Samsung SC-D453S User Manual (user Manual) (ver.1.0) (English) - Page 75
Connecting to a TV which has no Audio and Video Input Jacks, Playback, PLAY/STILL button.
View all Samsung SC-D453S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Playback Connecting to a TV which has no Audio and Video Input Jacks ✤ You can connect your Camcorder to a TV through a VCR. 1. Connect the Camcorder to your VCR with the Multi-AV cable. I The yellow jack: Video I The white jack: Audio(L) - Mono I The red jack: Audio(R) 2. Connect a TV to the VCR. 3. Set the Power switch to PLAYER. 4. Set the Mode switch to TAPE. 5. Turn on both the TV and VCR. I Set the input selector on the VCR to Line. I Select the channel reserved for your VCR on the TV set. 6. Play the tape. ENGLISH Video input-Yellow S-Video input Audio input(left)-White VCR Audio input(right)-Red DV Camcorder USB AV/ S TV Audio/Video/ S-Video Antenna Playback ✤ You can play the recorded tape in Player mode. 1. Connect a power source and set the Power switch to PLAYER. 2. Set the Mode switch to TAPE. 3. Insert the tape you wish to play back. 4. Using the / (REW/FF) buttons, find the first position you wish to play back. 5. Press the (PLAY/STILL) button. I The images you recorded will appear on the TV after a few seconds. I If a tape reaches its end while being played back, the tape will rewind automatically. [ Notes ] I The playback mode (SP/LP) is determined by the mode in which the tape was recorded. I If the VCR has an S-Video input terminal, you may use S-Video Connector for better quality. I The S-Video Connector transmits video only. Connect Audio cables for sound. I If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L). 71