Samsung SCB-2000 User Manual - Page 7

Installation When using a CS-Mount lens 1. Please take off the CCD protection cap 2. Please attach the CS-Mount lens to the and C-mount adaptor. camera by screwing it in clockwise. C-mount adaptor CS-mount adaptor CCD protection cap Notes • Please use the specified lens connection parts as shown in the picture below. The use of the wrong sized parts may cause damage to the inside of the camera or result in poor fitting. • Use of a lens which is too heavy affects the balance of the camera and may cause a malfunction. Please use a lens that weighs less than 450g. • Please select Av mode if possible when adjusting the automatic light control (ALC) of an auto lens. Use of PK mode may cause hunting. C-mount lens : 10 mm or less CS-mount lens : 5 mm or less Connecting to the Monitor Please connect the video output terminal located on the back of the camera to the monitor. CCD Camera Monitor COLOR CCD CAMERA 12 User Guide • T he connection method varies depending on the type of monitor and accessories. Please refer to the user's manual for each instrument. • P lease turn off the power when connecting. Using Coaxial Communications • C oaxial Communications System • OSD Control method CAMERA SET UP DOWN LEFT RIGHT DVR MENU/ENTER UP KEY DOWN KEY LEFT KEY RIGHT KEY CONTROLLER OSD KEY JOYSTICK UP JOYSTICK DOWN JOYSTICK LEFT JOYSTICK RIGHT DVR DVD • : BNC • ---- : RS-485 • Video Cable The camera's video output port is connected to the monitor with a BNC coaxial cable, shown below : If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp. Distance 300m 450m 600m Recommended Cable Specification 3C2V(RG-59/U) 5C2V(RG-6/U) 7C2V(RG-11/U) Notes • It is recommended that pure copper coax cable is used and not copper coated steel, as this will cause issues with the communication over the coaxial cable. COLOR CCD CAMERA 13 User Guide