Samsung SCD5000 User Manual (ENGLISH) - Page 39
Controlling Sound from the Speaker
UPC - 036725301085
View all Samsung SCD5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
ENGLISH Preparation Adjusting the LCD during PLAY ✤ You can adjust the LCD during playback. ✤ The adjustment method is the same as is used while in CAMERA mode. (See page 32) Controlling Sound from the Speaker The Speaker only works in PLAYER mode. s When you use the LCD screen for playback, you can hear the recorded sound from the built-in Speaker. - Follow the instructions below to decrease or mute speaker volume in PLAYER mode. - Take the following steps to lower the volume or mute the sound while playing a tape on the camcorder. 1. Set the device to CAMCORDER and set the Power Switch to PLAYER mode. 2. Press (PLAY/STILL) to play the tape. 3. Once the tape is in play and you hear sound, use the MENU DIAL to adjust the volume. s A Volume Level display will appear on the LCD. Levels may be adjusted from anywhere between 0 to 19. You will not hear any sound when the volume is set on 0. s If you close the LCD while playing, you will not hear sound from the speaker. Notes s When the cable is connected to the A/V jack, you cannot hear sound from the speaker and cannot adjust the volume. s You can hear sound from the speaker by removing the connected cable from the A/V jack FADE S.SHOW BLC PLAY TAPE MEMORY OFF REC REV FWD 0 : 2 3 : 4 7 5 5 min VOL. [ 1 1 ] 1 2 : 0 0 AM O C T . 1 0 . 2 0 0 3 34