Samsung SHR-6080 User Manual - Page 42

using the DVR SETTING THE DEVICE You can setup Camera, Storage Device, Remote Device, POS Device and Monitor. Camera Setting the Camera You can set Video, Audio, Channel Name and Dwell Time of a Camera. Using the mouse may help easy setup. 1. Press the [MENU] button on the remote control or front panel. 2. Use the left/right button (◄ ►) to select . Device setting menu is selected. 3. Use the up/down buttons (▲▼) to move to , and press [ENTER] button. Device Camera Storage Device Remote Device POS Device Monitor Logout Exit 4. Select . A window for setting Video, Audio, Channel Name and Dwell Time of a Camera appears. 5. Use direction buttons to move to a desired item, and set the value. • Video Camera Camera CH Video 1 ON 2 ON 3 ON 4 ON 5 ON 6 ON 7 ON 8 ON PTZ Audio OFF OFF OFF OFF OFF OFF OFF OFF - : You can turn ON/OFF the selected channel's camera. Screen Setup OK - : Shows information other than the video of the selected channel.  For privacy protection, it does not display the video while the recording continues. - : Shows nothing but an empty screen while the recording continues. CH Name CAM 01 CAM 02 CAM 03 CAM 04 CAM 05 CAM 06 CAM 07 CAM 08 SEQ-Dwell Time 5 sec 5 sec 5 sec 5 sec 5 sec 5 sec 5 sec 5 sec Previous/Next Page Cancel • Audio - If set to , you can turn the audio of the channel ON/OFF on the Live screen. - If set to , the channel's audio is off on the Live screen and not recorded.  The audio input is available for CH 1, 2, 3, and 4 only while output allows only one channel. • CH Name : Up to 15 characters including blanks are allowed.  Refer to "Using Virtual Keyboard". (Page 36) • SEQ-Dwell Time: You can set the dwell time between channels for the Live screen and Spot Out.  If set to , the channel is not listed in the Auto Sequence mode. 42_ using the DVR