Samsung SIRS310W Owners Manual - Page 42
Using Auto Detection to set the dish type
View all Samsung SIRS310W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Chapter 2: Setting up and connecting 6 When you have displayed the correct dish type, use the right-arrow button on your remote control to highlight the on-screen OK button, then press the button on your remote control. A message appears warning you that your DIRECTV Receiver needs to reboot (turn itself off and on) for the Dish Type setting to take effect. 7 To change the Dish Type to the new setting, use the arrow buttons on your remote control to highlight the on-screen OK button, then press the button on your remote control. To leave the Dish Type setting unchanged, highlight the on-screen Cancel button, and press the your remote control. button on Using Auto Detection to set the dish type To function properly, your DIRECTV Receiver needs to know what type of satellite dish you are using. You can specify the dish type using the instructions on page 33, or you can follow the steps below to use the Auto Detection menu item to automatically set the dish type. Before you can use Auto Detection to set the dish-type, the dish must be correctly aligned and the DIRECTV Receiver must be receiving a strong signal from the satellite (that is, signal-lock must be established). To check the satellite signal, use the signal meter - see page 32 for details.) 1 Press the MENU button on your remote control. The Main menu appears. 2 Use the arrow buttons on your remote control to highlight the SETUP menu item, then press the button on your remote control. The SETUP menu appears. 3 Use the arrow buttons on your remote control to highlight the Installation menu item, then press the button on your remote control. The Installation menu appears. 35