Samsung SL-M3825DW User Manual Ver.1.01 (English) - Page 42
Transparency, Labels, Adhesives, Arrangement, Condition
View all Samsung SL-M3825DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Media and tray Transparency To avoid damaging the machine, use only transparencies designed for use in laser printers. Labels To avoid damaging the machine, use only labels designed for use in laser printers. • Must withstand the machine's fusing temperature. • Place them on a flat surface after removing them from the machine. • Do not leave unused transparencies in the paper tray for long. Dust and dirt may accumulate on them, resulting in spotty printing. • To avoid smudging caused by fingerprints, handle them carefully. • To avoid fading, do not expose printed transparencies to prolonged sunlight. • Ensure that transparencies are not wrinkled, curled, or have any torn edges. • Do not use transparencies that separate from the backing sheet. • To prevent transparencies from sticking to each other, do not let the printed sheets stack up as they are being printed out. • When selecting labels, consider the following factors: - Adhesives: Should be stable at your machine's fusing temperature about 170°C (338°F). - Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams. - Curl: Must lie flat with no more than 13 mm of curl in any direction. - Condition: Do not use labels with wrinkles, bubbles, or other indications of separation. • Make sure that there is no exposed adhesive material between labels. Exposed areas can cause labels to peel off during printing, which can cause paper jams. Exposed adhesive can also cause damage to machine components. 2. Menu Overview and Basic Setup 42