Samsung SMT-4011 User Guide - Page 35

Main Icons Remocon Safety Lock Port Selection Select Button Info Grid Monitor Selection Control Tools 1. Use the main icons to switch into each screen. 2. Allows you to enable or disable the remote control signal receiving function of the monitor unit. 3. Set the Safety Lock function. When setting the Lock function, you can only operate power and lock buttons on the remote control and set. 4. The setting for the PC Serial Port can change. The original value is COM1. 5. Click Select all or Clear to select or clear all monitors. 6. Use Grid to view brief information on selected monitor. 7. Select a monitor from monitor Selection. 8. Use Control Tools to control monitors. The remote control Enable/Disable function operates whether or not the power is On/Off, and this applies to all monitors connected to the MDC. However, regardless of the status at the time the MDC is shut down, the remote control signal receiving function of all monitors is initialized to Enable when the MDC is closed. Port Selection Z[