Samsung SMX-F44LN User Manual (user Manual) (ver.1.0) (English) - Page 30
CONNECTING A POWER SOURCE, Battery pack insertion/ejection
View all Samsung SMX-F44LN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
preparation CONNECTING A POWER SOURCE • Be sure to charge the battery pack before you start using your camcorder. • Use the IA-BP210E battery pack only. • The battery pack may be charged a little at the time of purchase. Battery pack insertion/ejection It is recommended you purchase one or more additional battery packs to allow continuous use of your camcorder. Inserting the battery pack 1. Insert the battery pack into the battery pack slot until it softly clicks. • Make sure that the SAMSUNG logo is facing front when the camcorder is placed as shown in the figure. Insert Ejecting the battery pack 1. Gently push the Battery pack release switch in the direction as shown in the diagram to eject the battery. 2. Push down and lift the battery pack to pull out in the direction as shown in the diagram. Eject • Use only Samsung-approved battery packs. Do not use batteries from other manufacturers. Otherwise, there is a danger of overheating, fire or explosion. • Samsung is not responsible for problems occurring due to using unapproved batteries. • Remove the battery pack separately from the camcorder while not in use. • It is recommended to prepare an additional battery pack for prolonged outdoor use. 18 • Additional battery packs can be purchased from samsungparts.com.