Samsung SP-A600B User Manual (user Manual) (ver.1.0) (English) - Page 25

Using the Screen Adjustment Menu (OSD: On Screen Display) - digital projector

Get Samsung SP-A600B PDF manuals and user guides View all Samsung SP-A600B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

CLASSIFICA TION STATE MEASURES Action 1 Action 2 Action 3 Action 4 Action 5 Action 6 When the cooling fan system is not in normal operating condition. If the symptom remains even after disconnecting and then reconnecting the power cord and turning the projector on again, contact a Samsung service center. When the lamp cover protecting the lamp unit is not properly closed or the sensor system is not in normal operating condition. Check whether the screws at the bottom side of the projector are fastened correctly. If they are abnormally fastened, contact a Samsung service center. When temperature inside of the projector becomes too high. Adjust the installation state of your projector by referring to the Installation Precautions section listed above. Cool down your projector sufficiently and then operate it again. If the same problem occurs continually, contact a Samsung service center. No video Disconnect and reconnect the power cord and start the projector again. If the same symptom still occurs, contact a Samsung service center. The lamp malfunctions after power turns off abnormally or after powering on right after turning off the projector. Turn the power off, wait for a sufficient amount of cooling time and then turn the power on to operate. If the same problem occurs continually, contact a Samsung service center. When the screen becomes darker Check the lamp usage time on the Information Display screen. If you need to replace the lamp, contact a Samsung service center. This Projector uses a cooling fan system to keep the unit from overheating. Operation of the cooling fan may cause noise, which does not affect the product performance and is part of normal operation. 3-5 Using the Screen Adjustment Menu (OSD: On Screen Display) The Screen Adjustment Menu (OSD: On Screen Display) Structure MENU Input Picture Setup Option Source List Mode Color Pattern Install PC Language Sleep Timer Edit Name SUB-MENU Size Overscan Lamp Mode Color Standard Menu Position LED Indicator Position Digital NR 1080/24fps Mode Film Mode V-Keystone Background Factory Default Menu Transpar- Menu Display ency Time Buzz Information Black Level Test Pattern Auto Power On Using 3-5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
Using
3-5
This Projector uses a cooling fan system to keep the unit from overheating. Operation of the cooling fan may cause noise,
which does not affect the product performance and is part of normal operation.
3-5
Using the Screen Adjustment Menu (OSD: On Screen Display)
The Screen Adjustment Menu (OSD: On Screen Display) Structure
CLASSIFICA
TION
STATE
MEASURES
Action 1
When the cooling fan system is
not in normal operating condi-
tion.
If the symptom remains even after disconnecting and then reconnecting
the power cord and turning the projector on again,
contact a Samsung
ser-
vice center
.
Action 2
When the lamp cover protecting
the lamp unit is not properly
closed or the sensor system is
not in normal operating condi-
tion.
Check whether the screws at the bottom side of the projector are fastened
correctly. If they are abnormally fastened,
contact a Samsung
service cen-
ter
.
Action 3
When temperature inside of the
projector becomes too high.
Adjust the installation state of your projector by referring to the Installation
Precautions section listed above. Cool down your projector sufficiently and
then operate it again. If the same problem occurs continually,
contact a
Samsung
service center
.
Action 4
No video
Disconnect and reconnect the power cord and start the projector again. If
the same symptom still occurs, contact a Samsung
service center
.
Action 5
The lamp malfunctions after
power turns off abnormally or
after powering on right after
turning off the projector.
Turn the power off, wait for a sufficient amount of cooling time and then
turn the power on to operate. If the same problem occurs continually,
con-
tact a Samsung
service center
.
Action 6
When the screen becomes
darker
Check the lamp usage time on the Information Display screen. If you need
to replace the lamp,
contact a Samsung
service center
.
MENU
SUB-MENU
Input
Source List
Edit Name
Picture
Mode
Size
Position
Digital NR
Black Level
Color Pattern
Overscan
1080/24fps
Mode
Film Mode
Setup
Install
Lamp Mode
V-Keystone
Background
Test Pattern
PC
Color Standard
Factory Default
Option
Language
Menu Position
Menu Transpar-
ency
Menu Display
Time
Auto Power On
Sleep Timer
LED Indicator
Buzz
Information