Samsung SP-L250W User Manual (user Manual) (ver.1.0) (English) - Page 27

also be shown, though you can view more of the area. In this case, turn Overscan on. Film Mode PC Zoom Using this function, you can set the display mode so it is optimized for playing movies. 1) Off 2) On ▶ Film Mode can only be supported for the [AV], [S-Video], 480i, and 576i of AV Timing(D-Sub) signals . Eliminates or reduces noise that causes unstable screen quality, such as screen shaking. If the noise is not removed using Fine Adjustment, adjust the frequency to the maximum and then perform Fine Adjustment again. ▶ It is only enabled for the PC Timing input of the D-Sub terminal. ▶ Refer to PC Timing. 1) Auto Adjustment : Used to adjust frequency and phase of PC screen automatically. 2) Coarse : Used to adjust frequency when vertical lines appear on PC screen. 3) Fine : Used to fine tune the PC screen. 4) Reset : Using this function, you can reset the PC menu settings to the factory default settings. Enlarges the PC screen to 2X, 4X, or 8X. ▶ This can only be adjusted when the input signal is PC Timing. Auto Adjustment Coarse Fine Reset | Basic Functions | Input | Picture | Setup | Option | * Click the Play( )/Stop( ) button in the table below to view the video file. Screen Adjustment Install Description To tailor the picture to the installation location, you can invert the projected images vertically/horizontally. Play/Stop Lamp Mode 1) Front-Floor : Normal Image 2) Front-Ceiling : Horizontal/Vertical Reversed Image 3) Rear-Floor : Horizontally Reversed Image 4) Rear-Ceiling : Vertically Reversed Image Used to set the image brightness by adjusting the amount of light generated by the lamp. 1) Eco : This mode is optimized for small screens smaller than 100 inches. This mode decreases the lamp brightness and power consumption in order to extend the lamp lifetime and reduce noise and power consumption. 2) Bright : This mode maximizes the lamp brightness when the ambient illumination is Eco Bright