Samsung UF-80DX User Manual - Page 16

UF-80 Connecting to output device Desktop computer BRIGHT INT/EXT - LAMP AF ROTATE AWC + ZOOM FREEZE SAMSUNGUDFIG-IT8A0L PDREXSENTER Connect a desktop PC and the presenter using USB cable and install the supplied program. You can see the projected image on the PC monitor and control the image using the program. RS-232C connection is available for advanced user. If you connect a PC with RS-232C cable, you should set up your PC and make your own program to control the projected image on PC. Ask your dealer for further details. USB connection DVI MOUSE RS-232C VGA OUT VGA IN USB Connect to the USB port on your PC, then install the supplied UF-80 program. Digital Presenter Caution We recommend you to connect to USB port which is attached on computer main board. (It can make troubles in extended front-side USB port or USB hub without power in accordance with computers.) Be sure to use the USB cable shorter than 5.0 m. RS-232C connection DVI MOUSE Connect the cable to the RS-232C terminal on your PC. RS-232C cable is not provided with the presenter. You can obtain one from your computer dealer. RS-232C VGA OUT Digital Presenter VGA IN USB Page 16