Samsung UN40D5550RF Quick Guide (easy Manual) (ver.1.0) (English) - Page 12

Connecting to an Audio Device Using an Optical (Digital) or an Audio (Analog) Cable Connection Available devices: Digital Audio System, Amplifier, DVD home theater Digital Audio System OPTICAL Amplifier / DVD home theater AUDIO IN R-AUDIO-L Optical Cable (Not Supplied) Audio Cable (Not Supplied) R W Red White ✎✎DIGITAL AUDIO OUT (OPTICAL) xx When you connect a Digital Audio System to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system. xx 5.1 CH (channel) audio is available when you connect the TV to an external device supporting 5.1 CH. xx When the receiver (home theater) is set to on, you can hear sound output from the TV's optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is a digital component such as a DVD player / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and you connected it to the TV via HDMI, you will only hear 2 CH audio from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater. ✎✎AUDIO OUT: Connects to the audio input jacks on your amplifier/DVD home theater. xx When connecting, use the appropriate connector. xx When you connect an audio amplifier to the AUDIO OUT jacks, decrease the volume of the TV and adjust the volume level with the amplifier's volume control. English - 12