Samsung UN55C9000ZF User Manual (user Manual) (ver.1.0) (English, French, Span - Page 22
Vertical Strip, Line by Line and Checker, Samsung 3D Active Glasses are sold
View all Samsung UN55C9000ZF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Basic Features 3D This exciting new feature enables you to view 3D content. In order to fully enjoy this feature, you must purchase a pair of Samsung 3D Active Glasses (SSG-2100AB, SSG-2200AR, 3D SSG-2200KR) to view 3D video. Samsung 3D Active Glasses are sold separately. For more detailed purchasing information, contact the retailer where you purchased this TV. 3D emitter ✎✎If there is any obstacle between the emitter and 3D Active Glasses, the proper 3D effect may not be obtained. ■■ 3D Mode: Select the 3D input format. ✎✎ If you want to feel the 3D effect fully, please wear the 3D Active Glasses first, and then select 3D Mode from the list below that provides the best 3d viewing experience. ✎✎ When watching 3D images, turn on 3D Active Glasses. 3D Mode Off 2D → 3D Side by Side Top & Bottom Line by Line Vertical Stripe Checker Board Frame Sequential Operation Turns the 3D function off. Changes a 2D image to 3D. Displays two images next to each other. Displays one image above another. Displays the images for the left and right eye alternately in rows. Displays the images for the left and right eye alternately in columns. Displays the images for the left and right eye alternately in pixels. Displays the images for the left and right eye alternately in frames. ✎✎ "Side by Side" and "Top & Bottom" are available when the resolution is 720p, 1080i and 1080p in DTV, HDMI and USB mode or when set to PC and the PC is connected through an HDMI/DVI cable. ✎✎ "Vertical Strip", "Line by Line" and "Checker Board" are available when the resolution is set to PC and the PC is connected through an HDMI/ DVI cable. ✎✎ "Frame Sequential" displays the frequency (60Hz only) when the resolution is set to PC. ■■ 3D → 2D (Off / On): Displays the image for the left eye only. ✎✎ This function is deactivated when 3D Mode is set to "2D → 3D" or Off. ■■ 3D View point: The overall adjustment of 3D perspective. ✎✎ This function is deactivated when 3D Mode is set to "2D → 3D" or Off. ■■ Depth: Adjusts focus / depth in "2D → 3D" mode. ✎✎ This function is only activated when the 3D Mode is "2D → 3D". ■■ Picture Correction: Adjusts the images for the left and right eye. ■■ 3D Auto View (Off / On): If 3D Auto View is set to On, a "Side-By-Side" format HDMI signal with one of the resolutions below is automatically switched to 3D. Here, correct 3D information must be sent from the Standard HDMI 3D Format. ✎✎ If a 3D failure occurs due to a 3D information error, set 3D Auto View to Off and manually select a 3D Mode using the 3D button or corresponding menu. ✎✎ Support resolution (16:9 only) Resolution 1280 x 720p 1920 x 1080i 1920 x 1080p Frequency (Hz) 60 Hz 60 Hz 24 / 30 / 60 Hz ■■ 3D Optimize: The overall adjustment of 3D effect. Resolution supported for HDMI PC mode The resolution for HDMI PC mode is optimized to 1920 x 1080 input. An input resolution other than 1920 x 1080 may not be displayed properly in 3D display or full screen mode. 22 English