Samsung WA3000 User Manual - Page 28
Information Codes
View all Samsung WA3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
troubleshooting Information codes The Washer may display information codes to help you understand what is occurring with your Washer better. CODE SYMBOL MEANING SOLUTION Hot LED Flashes Lid is open when washer is running. Close the lid tightly and restart the cycle. If the code reappears, call for service. Warm LED Flashes Cold LED Flashes Tap Cold LED Flashes Communication error between SUB PBA and MAIN PBA. A button is not working properly. The Water Level sensor is not working properly. When the Tap Cold LED is flashing, the washer drains for 3 minutes. During this time, the Power button is inoperative. Call for service. Call for service. Call for service. Your Washer has tried to fill but was unsuccessful. Extra Large LED Flashes When the Extra Large LED is flashing, the washer drains for 3 minutes. During this time, the Power button is inoperative. Make sure the water faucets are open all the way. Check for kinked hoses. Check the inlet screens on the fill hoses. If you use a Flood Safety Device, remove the device and connect the water hoses directly to the unit. Large LED Flashes Medium LED Flashes Small LED Flashes Check if the hot water supply hose is connected. You must connect the hot water supply hose because hot water is supplied by the Auto Temperature Control (A.T.C.) function. Your Washer has tried to fill but has not reached the proper water level. When the Large LED is flashing, the washer drains for 3 minutes. During this time, the Power button is inoperative. A fault is detected in the water level sensor. Call for service. Call for service. Your washer is not draining. It can also mean that the unit senses a small clog while draining. Do the following: 1) Turn off the unit and turn it on again. 2) Select only the Spin Cycle. 3) Press the Start/Pause to drain the water. If it still does not drain, call for service. Hot & Warm LEDs flash Unbalanced load prevented your Redistribute the load, and then press the Start/ Washer from spinning. Pause button. English - 28 8"+@8"+"8@64&3."/6 JOEE