Samsung WA46CG3505AVA4 User Manual - Page 23
washer, and then hand tighten
View all Samsung WA46CG3505AVA4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Untitled-20 23 1. Attach the water hoses to the hot and cold water taps, and then hand tighten the water hose fittings until they are tight. Then, use pliers to tighten the fittings by an additional two-thirds of a turn. To avoid damaging the fittings, do not overtighten them. 2. Pull the water hoses to check if they are firmly connected. 3. Put the other ends of the hoses into a bucket, and then open the water taps for 10 - 15 seconds to remove impurities. When done, close the taps. 4. Attach the water hoses to the hot and cold water inlets on the back of the washer, and then hand tighten the water hose fittings until they are tight. Then, use pliers to tighten the fittings by an additional two-thirds of a turn. NOTE If you do not want to use the hot water supply hose, insert the water intake cap onto the hot water supply intake. When you do a wash, press Temp. to select Cold. English 23 2023-06-22 6:12:03 Installation