Samsung WA48H7400AW/A2 User Manual Ver.1.0 (English, French, Spanish) - Page 32
INFORMATION CODES, Temperature Control A.T.C. function. - 4e error code
View all Samsung WA48H7400AW/A2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
troubleshooting Information codes The Washer may display information codes to help you understand what is occurring with your Washer better. CODE SYMBOL MEANING SOLUTION The Water Level sensor is not working properly. Call for service. 1E When washer displays "1E", washer do draining for 3 minutes, At this time, Power button is invalid. Your Washer has tried to fill but was unsuccessful. Make sure the water faucets are open all the way. Check for kinked hoses. Check if the hot water supply Check the inlet screens on the fill hoses. hose is connected. If you use a Flood Safety Device, then please 4E When washer displays "4E", remove the device and connect the water hoses washer do draining for 3 minutes. directly to the unit. At this time, Power button is You must connect the hot water supply hose invalid. because hot water is supplied by the Auto Temperature Control (A.T.C.) function. Your washer is not draining. It can Do the following: also mean that the unit senses a 1) Turn off the unit and turn it on again. 5E small clog while draining. 2) Select only the Spin Cycle. 3) Press the Start/Pause to drain the water. If it still does not drain, call for service. Your Washer has tried to fill but has not reached the proper water level. Call for service. LE When washer displays "LE", washer do draining for 3 minutes, At this time, Power button is invalid. UE Unbalanced load prevented your Redistribute the load, press the Start/Pause Washer from spinning. button. dE Lid is open when washer is running. Close the lid tightly and restart the cycle. If the code reappears, call for service. dE1 Your washer failed to lock or unlock the lid. Close the lid tightly and restart the cycle. If the code reappears, call for service. dE1 bE2 The door will not unlock. A jammed Key. Make sure the lid is firmly closed. Push the Power button to turn off your washer, then turn it on again. If the code reappears, call for service. Call for service. 3E Motor not running properly. Restart the cycle pressing the Start/Pause button. If the code reappears, call for service. AE Communication error between SUB PBA and MAIN PBA. Call for service. English - 32 8")"8"4)@8")@64&3."/6 1@&/JOEE