Samsung WA50F9A7DSW/A2 User Manual Ver.1.0 (English, French, Spanish) - Page 31
Problem, Solution
View all Samsung WA50F9A7DSW/A2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
05 troubleshooting troubleshooting Check these solutions if your washer... PROBLEM SOLUTION will not start. • Make sure the lid is closed. • Make sure your washer is plugged in. • Make sure the water source faucets are open. • Make sure to press the Start/Pause button to start your Washer. • Make sure Child Lock is not activated. See page 21. • Before your washer starts to fill, it will make a series of clicking noises to check the lid lock and do a quick drain. • Check the fuse or reset the circuit breaker has no water or not enough • Turn both faucets on fully. water. • Straighten the water inlet hoses. • Disconnect hoses and clean the screens. Hose filter screens may be clogged. has detergent remaining in the automatic dispenser after the wash cycle is complete. • Make sure your washer is running with sufficient water pressure. vibrates or is too noisy. • Make sure your washer is set on a level surface. If the surface is not level, adjust your washer's feet to level the appliance. • Make sure your washer is not touching any other object. • Make sure the laundry load is balanced. stops • Plug the power cord into a live electrical outlet. • Check the fuse or reset the circuit breaker. • Close the lid and press the Start/Pause button to start your washer. For your safety, your washer will not spin unless the lid is closed. • Before your washer starts to fill, it will make a series of clicking noises to check the lid lock and do a quick drain. • There may be a pause or soak period in the cycle. Wait and it may start. • Check the screens on the inlet hoses at the faucets for obstructions. Clean the screens periodically. '"8"4)@8"'@64&3."/6 JOEE troubleshooting _31