Samsung WA50R5200AV User Manual - Page 52

Troubleshooting Problem Action Water is not supplied. • Make sure you press or tap Start/Pause (Hold to Start) after selecting the cycle and options. • Make sure the water taps are open. • Are the mesh filters in the water inlets clogged? Clean the mesh filters by brushing with a toothbrush. See page 48. • Is the water supply cut off? If the water supply is cut off, close the tap and power off. • Straighten the water supply hoses. • Open and close the door, and then press or tap Start/Pause (Hold to Start). • If the water pressure is low, it takes longer to start washing. • If the water level is not as high as necessary or lower than expected, use the level selector to adjust the water level. • Make sure the washing machine is running with sufficient After a cycle, detergent water pressure. remains in the automatic • Make sure the detergent drawer is properly inserted. dispenser. • Remove and clean the detergent drawer, and then try again. Vibrates excessively or makes noise. • Make sure the washing machine is on a level floor. If the floor is not level, use the levelling feet to adjust the washing machine. • Make sure the washing machine is not contacting any other object. • Make sure the laundry load is balanced. • Make sure the laundry is spread evenly in the washing machine. Spread out the laundry evenly and start again. • Make sure the space around the washing machine is free of objects. • Humming is produced normally during operation. • Objects such as coins can cause noise. Remove these objects from the washing machine after washing is complete. Troubleshooting 52 English Untitled-12 52 2020-09-04 7:51:22