Samsung WF405ATPAWR/AA Trouble Shooting Guide User Manual Ver.1.0 (English, Fr - Page 3
Warning - lowes
View all Samsung WF405ATPAWR/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
ALIGNMENT AND ADJUSTMENTS WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to washer before servicing, unless testing requires power. NO Error Code Diagnostic Code Error Image Description Corrective Action 11 tE tE Abnormal high/low temperature or resistance (Thermal sensor or PBA resistance). Go to " Board Input Test" and check Water Temperature. Check loose or pinched wires. Replace PCB or thermistor. 12 3E MICOM is attempting to drive the motor but is not getting any response signals Evaluate wire harness for loose or 3E from the hall sensor. Visual check shows unhooked connections. Go to " motor is not running. (Locked, Defective Quick Test Mode" and test Motor. Hall Sensor or Overload) 13 Hr Hr This error code appears when the heater is 96°C or above. Replace PCB 14 nF1 15 suds 16 AE nF1 suds AE This error code appears when the water temperature is 50°C or above Please connect the hot/cold water for 8 seconds or longer in the Wool hose connection correctly. and Delicate course. Suds is detected during the washing session. ("SUdS" is not an error. If the washer is in suds period, "SUdS" will Guide a user to reduce amount of detergent usage. light up instead of remaining time.) Communication error between SUB Check Main PBA, SUB PBA & Wire- PBA and MAIN PBA harness. Replace PCB 17 SF SF System Error Replace PCB 18 2E 2E Voltage for motor control bus is over or under specified limit. Replace PCB 3 WF405ATP-03144A_EN.indd 3 2012-03-02 �� 9:28:47