Samsung WF56H9100AG/A2 Quick Guide Easy Manual Ver.1.0 (English, French, Germa - Page 2
Self-test - model
View all Samsung WF56H9100AG/A2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
TRY THE FOLLOWING... When the door does not open The door does not open when the temperature inside your washing machine is high or when the tub is filled with water. • When the internal air temperature after a wash is higher than 70 °C or the water temperature is more than 55 °C. Wait until the internal temperature has dropped. • When the tub is filled with water. ➲ Select Spin to drain the water. Then you will be able to open the door. For some models, you can open door when "End" is displayed or the end melody is played. ✔ If you open the door by force, it may result in damage to the product or safety issues. When selecting the Dry function For the Drying capacity, 1/3 of the wash capacity is reasonable. The maximum drying rate is 95%. • If you insert more than the maximum drying capacity specified in the user manual, the drying performance may decrease. Remove and shake out the laundry. Heat and moisture is removed and the laundry will be dry. SELF-TEST ✔ If any error message other than the following error messages is displayed, refer to the user manual. Indication Symptom Action When the door is opened Is the door opened? ➲ Make sure to operate your washing machine after closing the door. When no water is supplied Is the tap closed? ➲ Turn on the tap. Is the filter net of the water supply hose connector blocked? ➲ Remove and clean the filter net of the water supply hose. When the water does not drain Is the drain filter blocked? ➲ Clean the drain filter. Is the washing machine frozen because of the cold weather? ➲ Add hot water into the tub and let it defrost for about one hour. When inserting fabric softener If fabric softener is inserted above the reference line (MAX) of the fabric softener compartment, fabric softener may enter directly into the tub. • Insert fabric softener only up to the reference line (MAX) so that it does not overflow. If the rinse cap (hereafter cap) is not inserted correctly or there is foreign material in the cap when using concentrated fabric softener (liquid fabric softener of a high viscosity), fabric softener or water may remain. • Check whether the cap is correctly inserted into the detergent compartment where the fabric softener is inserted. • Open the detergent compartment and press the removal button inside. Remove and clean it. MAX Rinse cap When the internal temperature of the drum is high Did the washing machine pause while drying or performing an air wash? ➲ The cooling fan operates automatically. Therefore wait until the 'Hot' indication disappears. ✔ Only the Power and Start/Pause buttons operate while the 'Hot' indication displays. ✔ When the internal temperature of the drum is high, the door does not open. If you open the door by force, it may result in product damage and safety issues. Therefore wait until the temperature has dropped. When the wash time increases The wash time may increase if an unbalance is detected with the load, the machine will automatically try to balance the load. This process may extend the wash program time. • Press the Start/Pause button and then check the laundry status. Spread the laundry evenly and perform the course again. When water does not drain because the internal temperature does not drop below 55 °C even if thirty minutes has passed after the wash has finished Have the cold and hot water supply hoses been mixed up? ➲ Connect the cold and hot water supply hoses correctly. ✔ Operate your washing machine again by pressing the Start/ Pause button. DC68-02209B_EN_DE_FR_ES_IT_PT_RU.indd 2 2008-03-19 ¿ÀÈÄ 3:03:51