Home » Samsung Manuals » Mobile Phones » Samsung X426 » Manual Viewer

Samsung X426 User Manual (user Manual) (ver.1.0) (English) - Page 79

Sound Settings

Add to My Manuals
Save this manual to your list of manuals

Page 79 highlights

Sound Settings Sound settings allow you to customize the following: • ring melody, volume, and type. • sounds made when you press a key, receive a message, open/close the phone, or switch your phone on/off. • alert tone made every minute during a call, when you make an error, or when your call is connected to the system. Note: When the phone is in Silent mode, you cannot change sound settings. Ring Tone (Menu 3.1) This menu allows you to select a ring melody. You can choose between several melodies. Each time you select a melody, it plays for a few seconds. If you have downloaded sounds from the Internet, you can also select them in this menu. Ring Volume (Menu 3.2) This menu allows you to adjust the ring volume. Use the Up and Down keys or the Volume keys on the left side of the phone to increase or decrease the volume. Sound Settings 75

Section	Page
SGH-x426	1
User Manual	1
Please read this manual before operating your phone, and keep it for future reference.	1
Intellectual Property	3
All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers ...	3
Samsung Telecommunications America (STA), Inc.	4
1130 E. Arapaho Road Richardson, TX 75081 Tel: 972-761-7000 Fax: 972-761-7001	4
1601 E. Plano Parkway Suite 150 Plano, TX 75047 Tel: 888-987-HELP (4357) Fax: 972-761-7501	4
©2003 Samsung Telecommunications America. All rights reserved. No reproduction in whole or in part allowed without prior written approval. Samsung is a registered trademark of Samsung Electronics America, Inc. and its related entities.	4
Contents	5
Unpacking 5	5
Your Phone 6	5
Getting Started 14	5
Call Functions 20	5
Selecting Functions and Options 28	5
Phonebook 30	5
Entering Text 40	5
Options During a Call 47	6
Using the Menus 53	6
Messages 60	6
Call Records 72	6
Sound Settings 75	7
Phone Settings 80	7
Organizer 90	7
Network Services 101	7
Funbox 106	8
Solving Problems 117	8
Access Codes 120	8
Health and Safety Information 124	8
Standard Limited Warranty 150	8
Glossary 157	8
Index 162	8
Quick Reference Card 167	8
Unpacking	9
Your Phone	10
Phone Layout	10
Display	13
Service Light	16
Earbud/Microphone	17
Getting Started	18
Installing the SIM Card	18
1. If necessary, switch off the phone by holding down .	19
2. Remove the battery:	19
3. Slide the SIM card into the SIM card socket.	19
4. Place the battery so that the tabs on the end align with the slots at the bottom of the phone.	20
5. Press the battery until it clicks into place. Make sure the battery is properly installed before switching the phone on.	20
Charging a Battery	21
1. With the battery installed, plug the connector into the jack at the bottom of the phone.	21
2. Plug the adapter into a standard AC wall outlet.	21
3. When the battery is charged, unplug the adapter from the outlet. Press the gray tabs on both sides of the connector to disconnect the adapter from the phone.	22
Switching the Phone On/Off	23
1. Press and hold until the phone switches on.	23
2. To turn the phone off, press and hold until the power-off image displays.	23
Call Functions	24
Making a Call	24
1. Press and hold . The + character displays.	24
2. Enter the country code, area code, and phone number, then press .	24
1. Press to display the list of recent phone numbers.	26
2. Using the Up and Down navigation keys, scroll through the numbers until the number you want highlights.	26
3.	26
Adjusting the Volume	27
Answering a Call	27
1. Press or the Accept soft key to answer an incoming call.	28
2. To end a call, close the phone or press .	28
Viewing Missed Calls	28
1. Press the View soft key.	29
2.	29
1. Press the Options soft key.	29
2. Press the Up or Down navigation key to highlight the Edit Number option.	29
3. Press the Select soft key.	29
4. Change the phone number.	30
5.	30
1. Press the Options soft key.	30
2. Press the Up or Down navigation key to highlight the Delete option.	30
3. Press the Select soft key.	30
Quickly Switching to Silent Mode	31
Selecting Functions and Options	32
1. Press the appropriate soft key.	33
2.	33
Phonebook	34
Storing a Number with a Name	34
1. Enter the number you want to store.	34
2. To save the number, press the Save soft key.	34
3. Select an icon that identifies the category of the number, then press the Select soft key. Options are:	34
4. Enter a name and press the OK soft key.	35
5. Press the right soft key, labeled To Card or To Phone, to switch between phone and SIM card memory.	35
6. If you do not want to save the number and name in the suggested location, press to clear the location. Enter the preferred location using the number keys.	35
7. Press the OK soft key to store the name and number.	35
8.	35
1. At the idle screen, press the Ph. Book soft key.	36
2. Use the Up and Down keys to highlight New Entry and press the Select soft key.	36
3. Use the Left and Right navigation keys to select a category and press the Select soft key.	36
4. Enter a name and press the OK soft key.	36
5. Enter a number or address you want to store and press the Save soft key.	36
6. Continue the procedure from step 5 on page 31 to store the number.	36
Using Phonebook Entry Options	37
Searching for a Number in Phonebook	38
1. At the idle screen, press the Ph. Book soft key.	38
2. Press the Select soft key when Search highlights. You are asked to enter a name.	38
3. Enter the first few letters of the name that you wish to find. The Phonebook entries display.	39
4.	39
5. Press to dial the number, or press the Options soft key to access Phonebook entry options. See “Using Phonebook Entry Options” on page 33.	39
1. At the Idle screen, press the Ph. Book soft key.	39
2. Use the Up or Down navigation key to scroll to Group Search.	39
3. Press the Select soft key. You are asked to enter a group name.	39
4. Enter the first few letters of the group you want to find. The caller groups display.	40
5. Use the Up or Down navigation key to select the group you want, then press the View soft key. Phonebook entries in the caller group display.	40
6.	40
6. Press to dial the number, or press the Options soft key to access Phonebook entry options. See “Using Phonebook Entry Options” on page 33.	40
Editing a Caller Group	40
1. At the Idle screen, press the Ph. Book soft key.	40
2. Use the Up or Down navigation key to scroll to Group Edit and press the Select soft key.	40
3. Highlight the group you want using the Up or Down navigation key and press the Options soft key.	40
4. Change settings as required. The following options are available:	41
5. When you are finished, press or .	41
Speed-dialing	41
1. From the idle screen, press the Ph. Book soft key.	41
2. Use the Up or Down navigation key to scroll to Speed Dial and press the Select soft key.	41
3. Highlight key to assign the speed-dialing number, - , and press the OK soft key.	41
4. Select a Phonebook entry from the list and press the View soft key.	42
5. Select a number if the entry contains more than one and press the Select soft key.	42
6. When the speed dial number is assigned, select from the following options by pressing the Options soft key:	42
7. When you are finished, press or .	42
Checking the Memory Status	43
1. At the idle screen, press the Ph. Book soft key.	43
2. Select the Memory Status option.	43
3. Press the Up or Down navigation key to view the number of existing and remaining entries in the card and phone’s memory.	43
4. When you are finished, press or .	43
Entering Text	44
Changing the Text Input Mode	45
Using T9 Mode	46
1. When you are in T9 mode, start entering a word by pressing - . Press each key only once for each letter.	46
2. Enter the whole word before editing or deleting your keystrokes.	46
3. When the word displays correctly, go to step 4.	46
4. Press to add a space then start entering the next word.	47
Using Upper/Lower-Case Character Mode	47
1. Press the key labeled with the letter you want:	47
2. Select the other letters in the same way.	48
Using Number Mode	49
Using Symbol Mode	49
Options During a Call	51
Putting a Call on Hold	51
1. Enter or select the phone number .	51
2. Press to dial the second call. The first call is automatically put on hold.	51
1. Press the Hold soft key to put the current call on hold.	51
2. Make the second call in the normal way.	51
Mute	52
1. Press the Options soft key.	52
2. Highlight the Mute option.	52
3. Press the OK soft key. You cannot be heard by the caller.	52
1. Press the Options soft key.	52
2. Highlight the Unmute option.	52
3. Press the OK soft key. You can again be heard by the caller.	52
Muting/Sending Key Tones	52
Sending Tones	53
1. Press the Options soft key.	53
2. Highlight the Send Tones option.	53
3. Press the OK soft key.	53
4. Enter the required number and press the OK soft key.	53
Searching for a Number in Phonebook	53
1. Press the Options soft key.	53
2. Highlight the Phonebook option.	53
3. Press the OK soft key. The Phonebook entries display.	53
4. Enter the name you want to find.	53
5. Press the View soft key to display the highlighted entry.	53
Using the Message Service	54
Call Waiting	54
1. Press or the Accept soft key to answer the incoming call. The first call is automatically put on hold.	54
2. To switch between the two calls, press the Swap soft key.	54
3. To end a call on hold, press the Options soft key and select the End Held Call option.	54
Making a Multi-party Call	55
1. Call the first participant.	55
2. Call the second participant in the normal way. The first call is automatically put on hold.	55
3. To join the first participant to the multi-party call, press the Options soft key and select the Join option. Press the OK soft key.	55
4. To add a new person to the multi-party call, call the person, then press the Options soft key. Select the Conference option and press the OK soft key.	55
1. Press the Options soft key and choose the Select one option. Press the OK soft key.	56
2. Highlight a participant and press the Select soft key or .	56
3. When the Private option highlights, press the OK soft key. You can now have a private conversation with the person without leaving the call.	56
4. To return to the multi-party call, press the Options soft key and select Conference. Press the OK soft key. All of the multi-party call participants can now hear each other.	56
1. Press the Options soft key and choose the Select one option. Press the OK soft key.	56
2. Highlight a participant, then press the Select soft key or .	56
3. Select the Remove option and press the OK soft key. The call drops the participant, but you can continue to talk to the other participants.	56
4. To end the multi-party call, close your phone or press .	56
Using the Menus	57
Accessing a Menu Function	57
1. In Idle mode, press the Menu soft key.	57
2.	57
Accessing a Menu Function Using Shortcuts	58
1. Press the Menu soft key.	58
2. Press for Phone Settings.	58
3. Press for Language. The languages available display.	58
List of Menu Functions	58
1. Messages (see page 60)	59
2. Call Records (see page 72)	60
3. Sound Settings (see page 75)	60
4. Phone Settings (see page 80)	61
5. Organizer (see page 90)	62
6. Network Services (see page 101)	62
7. Funbox (see page 106)	63
Messages	64
Inbox (Menu 1.1)	64
1. Select a message and press the View soft key.	64
2. Use the Up and Down key to scroll through the message.	64
3. To move to the previous or next message, press or .	64
Outbox (Menu 1.2)	65
1. Select a message and press the View soft key.	66
2. Use the Up and Down key to scroll through the message.	66
3. To move to the previous or next message, press or .	66
Write New (Menu 1.3)	67
1. From the Messages menu, select Write New.	67
1. Create your message. See “Entering Text” on page 40.	67
2. When your message is complete, press the Options soft key. The following options are available:	67
3. Select Send or Save and Send and press the Select soft key.	68
4. If you select a save option, choose the memory location and press the OK soft key.	68
5. Enter a destination number and press the OK soft key. The message is sent.	68
1. Create your message.	68
2. Press the Options soft key.	68
3. Select one of the following options:	68
4. Complete the message, and send or save it using the procedure from step 2 on page 63.	69
Templates (Menu 1.4)	69
Settings (Menu 1.5)	70
My Objects (Menu 1.6)	71
Memory Status (Menu 1.7)	72
Voice Mail (Menu 1.8)	73
Broadcast (Menu 1.9)	74
Delete All (Menu 1.10)	75
Call Records	76
Missed Calls (Menu 2.1)	76
Incoming Calls (Menu 2.2)	76
Outgoing Calls (Menu 2.3)	77
Delete All (Menu 2.4)	77
Call Time (Menu 2.5)	78
Sound Settings	79
Ring Tone (Menu 3.1)	79
Ring Volume (Menu 3.2)	79
Alert Type (Menu 3.3)	80
Keypad Tone (Menu 3.4)	80
Message Tone (Menu 3.5)	81
Folder Tone (Menu 3.6)	82
Power On/Off (Menu 3.7)	82
Extra Tones (Menu 3.8)	82
Phone Settings	84
My Settings (Menu 4.1)	84
1. Select an image.	84
2. Press the Select soft key.	84
3. When the image displays, press the Select soft key. A prompt asks if you want to display text on the screen.	84
4. Press the Yes soft key to display the current date and time on the wallpaper image. Press the No soft key to display only the image.	84
Greeting Message (Menu 4.2)	85
Own Number (Menu 4.3)	85
Language (Menu 4.4)	86
Security (Menu 4.5)	86
Display Settings (Menu 4.6)	89
Extra Settings (Menu 4.7)	91
Short Cut (Menu 4.8)	92
1. Select the key to be used as a shortcut key:	92
2. Select the menu you want the key to activate.	92
3. Press the Select soft key to save the selection.	92
Reset Settings (Menu 4.9)	93
1. Select the Reset Settings menu.	93
2. Enter the 8-digit phone password and press the OK soft key.	93
Organizer	94
Calendar (Menu 5.1)	94
1. Select a date on the calendar.	95
2. Press the Select soft key.	95
3. Enter your memo and press the OK soft key. The phone prompts you to set an alarm.	95
4. If you want an alarm to ring on the selected day, press the Yes soft key.	96
5. If you pressed the Yes soft key, set the time for the alarm and press the OK soft key.	96
6. Select either AM or PM and press the Select soft key.	96
To Do List (Menu 5.2)	97
1. Press the New soft key.	97
2. Enter the first task.	97
3. Press the OK soft key.	97
4. Select High, Normal, or Low priority, and press the Select soft key.	97
5. Enter the7 deadline and press the OK soft key.	97
1. Highlight the task.	98
2. Press the View soft key.	98
3. Scroll through the tasks using the Up and Down keys.	98
1. Highlight the task.	98
2. Press to mark the task as completed as of the current date and time.	98
1. Highlight the task.	98
2. Press the Options soft key.	98
3. Select the Mark option.	98
4. Select the appropriate status (Done or Undo).	98
1. Press the Options soft key.	98
2. Select the New option.	98
3. Enter text, priority and deadline for the task.	98
1. Highlight the task.	99
2. Press the Options soft key.	99
3. Select the Edit option.	99
4. Change the text, priority and/or deadline for the task.	99
1. Press the Options soft key.	99
2. Select the Sort option.	99
3. Select the sort criterion (High, Low, Done or Undo).	99
1. Highlight the task.	99
2. Press the Options soft key.	99
3. Select the Copy option.	99
4. Change the text, priority and/or deadline for the task.	99
1. Highlight the task.	100
2. Press the Options soft key.	100
3. Select the Copy to Calendar option.	100
4. Change the text and/or deadline for the task and set the alarm.	100
1. Highlight the task.	100
2. Press the Options soft key.	100
3. Select the Delete option.	100
1. Press the Options soft key.	100
2. Select the Delete All option.	100
3. Confirm the deletion by pressing the OK soft key.	100
1. Press the Options soft key.	100
2. Select the Exit option.	100
Time & Date (Menu 5.3)	101
1. Select the city corresponding to your time zone. The local date and time display.	101
2. Press the Set soft key.	101
Alarm (Menu 5.4)	102
1. Choose the type of alarm to be set and press the Select soft key.	102
2. Enter the time for the alarm to sound.	102
3. Press the OK soft key.	102
4. If you select Morning Call in step 1, select the repeat option, Monday to Friday or Monday to Saturday and press the Select soft key.	103
Calculator (Menu 5.5)	103
1. Enter the first number using the numeric keys.	103
2. Press the right soft key until the symbol you want appears; + (addition), - (subtraction), * (multiplication), / (division).	103
3. Enter the second number.	104
4. To view the result, press .	104
Currency Exchange (Menu 5.6)	104
1. Enter the current exchange rate of your source currency and press the OK soft key.	104
2. Enter the amount to convert and press the OK soft key.	104
3. Press the Exit soft key to exit the currency convertor.	104
Network Services	105
Call Forwarding (Menu 6.1)	105
1. Select a call forwarding option and press the Select soft key.	105
2. Select the type of calls, voice or data, and press the Select soft key.	106
3.	106
4. Enter the number where the calls are being forwarded and press the OK soft key.	106
Call Waiting (Menu 6.2)	107
1. Select voice or data to indicate the type of call and press the Select soft key.	107
2. You can activate or deactivate the call waiting feature by using the Activate or Deactivate soft keys.	107
Network Selection (Menu 6.3)	107
1. When Network Selection displays, press the Select soft key.	108
2. Select the appropriate option and press the OK soft key.	108
3. Select a network from the list then press the OK soft key.	108
Caller ID (Menu 6.4)	108
Funbox	110
Games (Menu 7.1)	110
WAP Browser (Menu 7.2)	111
1. Press and hold . A menu displays.	113
2. Press the Select soft key to select an item.	113
3. Select a secondary option using the Up and Down keys, then press the Select soft key to confirm.	113
2. Enter the address and press the Enter soft key.	115
3. Enter a name for the favorite item and press the Enter soft key.	115
Downloads (Menu 7.3)	118
1. Scroll to the MIDlet you want and press the Launch soft key.	118
2. Start the MIDlet using the appropriate soft keys.	118
Solving Problems	121
Access Codes	124
Phone Password	125
PIN	125
PUK	126
1. Enter the PUK and press the OK soft key.	126
2. Enter a new PIN of your choice and press the OK soft key.	126
3. When the Confirm New PIN message displays, enter the same code again and press the OK soft key.	126
PIN2	127
PUK2	127
1. Enter the PUK2 and press the OK soft key.	127
2. Enter a new PIN2 of your choice and press the OK soft key.	127
3. When the Confirm PIN2 message displays, enter the same code again and press the OK soft key.	127
Health and Safety Information	128
Usage guidelines: All about performance and safety	128
Maintaining Safe Use of and Access to Your Phone	130
Caring for the Battery	134
Acknowledging Special Precautions and FCC	136
FDA Consumer Update	137
CTIA Safety Information	148
Owner's Record	153
User Guide Proprietary Notice	153
STANDARD LIMITED WARRANTY	154
Glossary	161
A	166
B	166
C	166
D	166
E	166
F	167
G	167
H	167
I	167
J	167
K	167
L	167
M	167
N	167
O	168
P	168
R	168
S	168
T	169
U	169
V	169
W	169