Samsung YP-35H User Manual (user Manual) (ver.1.0) (English) - Page 8

Connecting yepp to PC with USB cable 3 Plug one end of the USB cable into the USB port on the back of the PC. q The yepp will automatically turn on. 4 Connect the opposite end of the USB cable to the USB cable port on the bottom of the yepp. q If you disconnect the USB cable from your PC while implementing a command or initializing during USB driver installation, your PC may not function correctly. 5 USB driver is installed with a message saying that it is searching for a new device. You may not see the display screen during installation. Go to the device manager to check that installation has been successfully completed. 6 Upon installation of the USB driver "SAMSUNG YP-35" will appear in the [System Properties] ➝ [Device Manager]. 14 USB connect cable Note : How to check USB driver Windows 98: Control Panel ➝ System ➝ Device Manager ➝ Universal Serial Bus controllers/SCSI and RAID controllers Windows 2000: Control Panel ➝ System ➝ Hardware ➝ Device Manager ➝ Universal Serial Bus controllers ➝ USB Mass Storage Device Windows XP: Control Panel ➝ System ➝ Hardware ➝ Device Manager ➝ Universal Serial Bus controllers ➝ USB Mass Storage Device Note : If the YP-35 program has not been installed in Windows 98, then it will not communicate with you're your solid disk. You must install the USB driver file first. 7 When USB driver is not Installed automatically, refer to next page. Note : For WinXP, the following window will appear whenever you connect the USB cable to your YP-35. 15