Samsung YP-55V Quick Guide (easy Manual) (English) - Page 1

USB connect cable HOLD YP-55 128 MB Quick-55 2/26/04 11:38 AM Page 2 YP-55 Quick Guide Location of Controls Volume Button MENU/Loop Repeating Button Voice Recording Button MODE VOL REC / ENC Neck strap Hook Microphone Display Play/Stop/Pause Button Move to Track/ Speed Search Lever WOW Button USB Cable Connection Port Battery Cover Hold Switch Earphone Jack ENC Jack Playing Music When you press the button, the yepp logo appears and a music/voice file is played. Stopping Music When you press the button while playing, the music stops. If no buttons are pressed within 10 seconds (changes depending on settings), the yepp automatically powers off. ● You can also turn off the power by pressing and holding the button. 1 Connecting the USB cable ➤ Before connecting yepp to PC, make sure to install USB driver. 1 Plug one end of the USB cable into the USB port on the back of the PC. 2 Connect the opposite end of the USB cable to the USB cable port on the bottom of the yepp. ● If you disconnect the USB cable from your PC while implementing a command or initializing during USB driver installation, your PC may not function correctly. ● The yepp will automatically turn on. 3 USB driver is installed with a message saying that it is searching for a new device. You may not see the display screen during installation. Go to the device manager to check that installation has been successfully completed.. 4 Upon installation of the USB driver "SAMSUNG YP-55" will appear in the [System Properties] ➝ [Device Manager]. 2 MODE VOL REC / ENC