SanDisk 8GB EXTREME Product Manual - Page 77
Standby-96H, E2H, Standby Immediate-94H, E0H, Translate Sector-87H
UPC - 619659024321
View all SanDisk 8GB EXTREME manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
SanDisk CompactFlash Card OEM Product Manual ATA Command Description 5.1.21 Standby-96H, E2H This command causes the card to set BSY, enter the Sleep mode (which corresponds to the ATA "Standby" Mode), clear BSY and return the interrupt immediately. Recovery from sleep mode is accomplished by simply issuing another command (reset is not required). Table 5-30 Standby Bit 7 6 5 4 3 2 1 0 Command (7) E2H or 96H C/D/H (6) X Drive X Cyl High (5) X Cyl Low (4) X Sec Num (3) X Sec Cnt (2) X Feature (1) X 5.1.22 Standby Immediate-94H, E0H This command causes the card to set BSY, enter the Sleep mode (which corresponds to the ATA "Standby" Mode), clear BSY and return the interrupt immediately. Recovery from sleep mode is accomplished by simply issuing another command (reset is not required). Table 5-31 Standby Immediate Bit Command (7) C/D/H (6) Cyl High (5) Cyl Low (4) Sec Num (3) Sec Cnt (2) Feature (1) 7 6 5 4 3 2 1 0 E0H or 94H X Drive X X X X X X 5.1.23 Translate Sector-87H When this command is issued, the controller responds with a 512-byte buffer of information on the desired cylinder, head and sector with the actual Logical Address. Table 5-32 Translate Sector Bit 7 6 5 4 3 2 1 0 Command (7) 87H C/D/H (6) 1 LBA 1 Drive Head (LBA 27-24) Cyl High (5) Cyl Low (4) Cylinder High (LBA 23-16) Cylinder Low (LBA 15-8) Sec Num (3) Sector Number (LBA 7-0) Sec Cnt (2) X Feature (1) X © 2007 SanDisk Corporation 5-23 Rev. 12.0, 02/07