SanDisk SDCFB-64-144/445 Product Manual - Page 75
Set Multiple Mode-C6H
UPC - 619659011345
View all SanDisk SDCFB-64-144/445 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
SanDisk CompactFlash Card OEM Product Manual ATA Command Description A host can choose the transfer mechanism by Set Transfer Mode and specifying a value in the Sector Count register. The upper 5 bits define the type of transfer and the low order 3 bits encode the mode value. Mode Value PIO Default Transfer Mode 00000 00d PIO Flow Control Transfer Mode x 00001 nnn Multiword DMA Mode x 00100 nnn Reserved 01000 nnn Reserved 10000 nnn Where "nnn" is a valid mode number in binary; "x" is the mode number in decimal for the associated transfer type; and "d" is ignored. Features 55H and BBH are the default features for CompactFlash cards; thus, the host does not have to issue this command with these features unless it is necessary for compatibility reasons. The 9AH Feature is accepted for backward compatibility with the SDP Series but has no impact on the card. SanDisk does not recommend the use of this command in new designs. Features 66H and CCH can be used to enable and disable whether the Power On Reset (POR) Defaults will be set when a soft reset occurs. The default setting is to revert to the POR defaults when a soft reset occurs. POR defaults the number of heads and sectors along with 16 bit data transfers and the read/write multiple block count. 5.1.19 Set Multiple Mode-C6H This command enables the card to perform Read and Write Multiple operations and establishes the block count for these commands. The Sector Count Register is loaded with the number of sectors per block. The current version of the card supports only a block size of 1 sector per block. Future versions may support larger block sizes. Upon receipt of the command, the card sets BSY to 1 and checks the Sector Count Register. © 2007 SanDisk Corporation 5-21 Rev. 12.0, 02/07