SanDisk SDSSDP-064G-G25 Quick Installation Guide - Page 1
SanDisk SDSSDP-064G-G25 Manual
View all SanDisk SDSSDP-064G-G25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
SanDisk® Solid State Drive Quick-Start Installation Guide NOTE: This guide applies to most solid state drives; check the instructions included with your SSD for more details. Upgrading your existing hard disk drive (HDD) to a new SanDisk Solid State Drive (SSD) is easy! This guide provides quick instructions on how to upgrade your SATA-based desktop or notebook computer HDD to a SanDisk SSD. We also cover cloning your data from your current HDD to your new SanDisk SSD using cloning software. Replacing your HDD with a solid state drive consists of three easy steps: 1. Connect your SanDisk SSD to your computer 2. Clone the data from your existing HDD to your new SanDisk SSD 3. Uninstall your HDD and replace it with your new SanDisk SSD BEFORE YOU START • Obtain data cloning software. There are many options available for purchase, but in this guide we will use data cloning software provided by Apricorn® to walk you through the data cloning process. • Confirm you have the required hardware* for your installation scenario: 1. SATA data cable (required for desktops computers only) 2. USB-to-SATA data cable 2 3. 3.5-inch mounting adapter and screws 1 (required for desktop computers only) 4. Phillips screwdriver 3 4 * Each of the above hardware components are sold separately or can be found in the SanDisk SSD Conversion Kit. See www.sandisk.com/go-SSD 1