Sanyo DP19640 Owners Manual - Page 8

How to attach the stand NOTE: • Unplug the AC cord from the AC INPUT terminal. • Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid any damage to the unit. • Do not touch or press the TV-screen, glass might break under pressure. Place the TV on its back onto a table. Align the stand's bottom-plate (supplied) as seen here. It will fit in only one direction. Hold the unit and attach the stand slowly. Please assure " " mark on the stand is facing the LCD panel side. Finally secure the bottom-plate with 2 screws (supplied). • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. How to remove the stand When you transport this product, remove the stand and pack flat against the back of the unit in the carton. To remove the stand, perform the step in reverse order. For wall mounting, the base must be removed. To disconnect the base/stand remove the two (2) screws from the back (see page 7). 8