Sanyo ET30L Instruction Manual, PLC-ET30L
Sanyo ET30L - PLC SXGA+ LCD Projector Manual
 |
UPC - 086483069925
View all Sanyo ET30L manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo ET30L manual content summary:
- Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 1
Multimedia Projector MODEL PLC-ET30L *Projection lens is optional. Owner's Manual - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 2
the top control or remote control (p.54). PIN code lock functions prevents unauthorized use of the projector (pp.54-56). ◆ Multiple Interface Terminals The projector has several interface terminals that can support various types of equipment and signals (pp.11-12). ◆ Lamp Control Brightness of the - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 3
the Filter Counter 58 Lamp Replacement 59 Resetting the Lamp Counter 60 Warning Indicators 61 Cleaning the Projection Lens 62 Cleaning the Projector Cabinet 62 Appendix 63 Troubleshooting 63 Menu Tree 66 Indicators and Projector Condition 68 Compatible Computer Specifications - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 4
of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 5
service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following the operating instructions - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 6
Safety Instructions Air Circulation Openings in the cabinet are provided for ventilation. is changed according to the temperature inside the projector. Air flow Air Intake Vent IMPORTANT! Clean the Filter Regularly!! The projector uses a lamp which generates significant heat. The cooling fans and - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 7
Safety Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 8
courier or any other transport service, consult your dealer. - Do not put the projector in a case before it is cooled enough. Cautions in Handling the Projector Do not hold the lens when lifting or moving the projector. Doing so may cause damage to the lens and the projector. Care must be taken when - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 9
instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number(s) : PLC-ET30L Trade Name : Sanyo Responsible party : SANYO from the Parts Department indicated in your User Instructions. If the plug supplied is not suitable - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 10
This slot is for a Kensington lock used to deter theft of the projector. *Kensington is a registered trademark of ACCO Brand Corporation. !0 Infrared Remote Receiver (Back) !1 Terminals and Connectors !2 Lamp Cover !3 Power Cord Connector !4 Optional Parts Attachment !5 Air Intake Vent !6 Hand Grip - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 11
output signal from video equipment to this jack (p.21). t USB CONNECTOR (Series B) Use this connector when controlling a computer with the remote control of the projector. Connect the USB terminal of your computer to this connector with the supplied USB cable (p.20). o AUDIO 1 JACK Connect the - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 12
computer to external video equipment (p.20). !3 CONTROL PORT CONNECTOR When controlling the projector from a computer, connect the computer to this connector with a control cable. !4 Infrared Remote Receiver (Back) The infrared remote receiver is also located in the front (pp.10, 16). ✽ RESET - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 13
indicator Lights yellow when the projection lamp reaches its end of life (pp.59, 69). e ON/STAND-BY button Turn the projector on or off (pp.24-25). r INPUT button Select an input source (pp.34-35). t LENS button Enter the focus, zoom, and lens shift adjustment mode (p.30). y POINT ed7 8 (VOLUME - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 14
) (p.29). e Signal Emission indicator Lights red while the laser beam is being emitted from the laser light window or a signal is being sent from the remote control to the projector (p.32). r Laser Light window A laser beam is emitted from here (p.32). t ON button Turn the - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 15
is not in use. Slide this switch to "RESET" to initialize the remote control code or switch the Spotlight and Pointer to the Laser pointer function (p.32 @2 KEYSTONE button Correct keystone distortion (p.31). @3 LENS SHIFT button Select the Lens Shift function (p.30). @4 SCREEN button Select the - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 16
battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions. Remote Control Receivers and Operating Range 16.4' Point the remote control toward the projector (to Infrared (5 m) Remote Receivers) when pressing the buttons. Maximum operating range for the - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 17
or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See "Remote control" in the Setting Menu on page 52. 1 Press and hold the MENU and a number button (1-8) for more than five - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 18
(The figure below is the example of Standard Lens.) For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. ✔Note: • The brightness in the room has a great influence on picture quality. It is recommended - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 19
Be careful when handling the lens. Do not drop. Lens Release button Attaching the lens to the projector 1 Remove the lens mount cover. 2 Fit the lens to the projector by aligning the red dot on the lens with the red dot of the projector. 3 Slowly turn the lens clockwise until it clicks. Make - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 20
) ✔Note: • When the AUDIO OUT is plugged-in, the projector's builtin speaker is not available. • USB cable connection is needed when operating the computer with the remote control. 20 Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 21
video cable Audio Input VIDEO AUDIO IN AUDIO IN VIDEO S-VIDEO Audio cable (stereo) ✔Note: • When the AUDIO OUT is plugged-in, the projector's builtin speaker is not available. • The S-VIDEO jack connection overrides the VIDEO jack connection when selecting AUTO in the Input Menu (p.35). Unplug - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 22
used for connection • Audio Cables (Mini Plug [stereo] x 2) • Scart-VGA Cable • BNC Cable • DVI-Digital Cable (Cables are not supplied with the projector.) Audio Output Component Video Output (Y, Cb/Pb, Cr/Pr) RGB Scart 21-pin Output Digital Output (HDCP compatible) Audio cable (stereo) BNC - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 23
system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning the projector on. CAUTION The AC outlet must be near this equipment and must be easily accessible. ✔Note: •Unplug - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 24
lamp control status icon (see page 49) appear on the screen. If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed projector. When using remote control Press the Number buttons on the remote , the projector will be the projector can no longer - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 25
screen. 2 Press the ON/STAND-BY button or the STAND-BY button on the remote control again to turn off the projector. The LAMP indicator turns off and the POWER indicator starts to blink green. After the projector is turned off, the cooling fans operates for 90 seconds. During the POWER indicator is - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 26
Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. 1 Press the MENU button on the top control or the remote control to display the On-Screen Menu. 2 Use - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 27
menu bar displays changes depending on the input signals. Basic Operation Guide Window Show the selected Menu of the OnScreen Menu. System Select Setting Menu Set the projector's operating configurations (pp.49- 57). - Language - Logo - Background - Lamp control - Pointer - Remote Control - RC - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 28
up to 15 percent from the central axis of the lens shift. ✔Note: • The arrow disappears at the maximum lens shift in each direction. Zoom Adjustment Display "Zoom" on of the projector and the signal being projected through the projector. Press the INFO. button on the top control or remote control to - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 29
is turned off, "On" is displayed. Press the Point 7 8 buttons again to turn the sound back on. Basic Operation Top Control VOLUME +/- buttons Remote Control VOL - button VOL + button MUTE button Volume Dialog Box Approximate level of the volume. Press the MUTE button to set the Mute function - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 30
the desired screen size. The selected screen size symbol appears on the screen for 4 seconds. See pages 46-48 for details. LENS SHIFT button See page 28 for details. Remote Control AUTO PC button D.ZOOM button ZOOM buttons FOCUS buttons FREEZE button INFO. button POINT ed buttons SCREEN button - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 31
normal, press the NO SHOW button again or press any other button. "No show" disappears after 4 seconds. P-TIMER button Press the P-TIMER button on the remote control. The P-Timer display "00:00" appears on the screen and the countdown starts (00:00-59:59). To stop the countdown, press the P-TIMER - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 32
to activate the Pointer function. (The Laser pointer has switched to the Pointer function.) 2 Press the LASER button on the remote control pointing toward the projector. The Spotlight or Pointer is displayed on the screen with the LASER button lighting green. Then move the Spotlight or Pointer - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 33
Wireless Mouse Operation The remote control can be used as a wireless mouse for your computer. 1 Before operating the wireless mouse, connect your computer and the projector with the supplied USB cable (p. 20). When the Pointer function is used, the wireless mouse is not available. 2 When a USB - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 34
Control Operation Press the INPUT 1, INPUT 2, or INPUT 3 buttons on the remote control. The input source appears on the screen as you press each button. Select the connected input source. RGB (Scart) RGB (PC digital) RGB (AV - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 35
the RGB PC signal is connected. Video When the RGB video signal is connected. Component* When the component signal is connected. * If the projector cannot reproduce proper video image, select a system manually (see "Video System Selection" on page 36). INPUT 3 Auto When selecting Auto, the - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 36
system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 37
(pp.40-41). ----- There is no signal input from the computer. Check the connection between your computer and the projector. (See "Troubleshooting" on page 63.) Mode 1 The preset system is manually adjusted in the PC Adjust Menu. The adjusted data can be stored in Mode 1-10 (pp.39-40). SVGA - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 38
pressing the AUTO PC button on the remote control. Remote Control AUTO PC button Menu Operation Auto the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can is not provided properly with this operation, manual adjustments are required (pp.39-40). • - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 39
PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the On-Screen - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 40
Display area H Use the Point 7 8 buttons to adjust the horizontal area displayed by this projector. Display area V Use the Point 7 8 buttons to adjust the vertical area displayed by this projector. Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 41
Dynamic For viewing pictures in a bright room. Standard Normal picture mode preset on the projector. Real Picture mode with improved halftone for graphics. (This icon is displayed with video signal.) Image 1-4 For viewing with the user preset image level in the Image Adjust Menu (see page 44). 41 - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 42
Image Adjustment Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 43
Disabled. L1........... For an active picture. L2........... For a still picture. Film........ For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Image Adjustment ✔Note: • Progressive cannot be selected when 480p, 575p, or 720p is - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 44
Image Adjustment Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures. Store To store the adjusted data, select Store and press the SELECT button. Use the Point ed buttons - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 45
function is set to "On," the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to "On," the picture is left/right reversed. This function is used to project the image from the rear - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 46
original image size is larger than the screen size (1400 x 1050), the projector enters to the panning mode automatically. Use the Point ed7 8 buttons to Provide the full screen image. Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 47
an input source from the Input Menu (p.35) again, or adjust the screen size with the D.ZOOM buttons on the remote control. Screen Adjustment ✔Note: • The projector cannot display any resolution higher than 1600 x 1200. If your computer's screen resolution is higher than that, lower the resolution - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 48
the desired function and press the SELECT button. Wide Provide the image at the 16:9 wide screen ratio. Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds and then the Aspect - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 49
: • When no captured image is set, the "User" options is not available. Lamp control This function allows you to change brightness of the Lower brightness reduces the lamp power consumption and extends the lamp life. It is recommended to use Eco 2 when using the projector continuously over a long - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 50
select function and set it to "User". Then the captured image will be displayed the next time you turn on the projector or when you press the NO the Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone correction. • When capturing an image, - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 51
is set to "4321" at the factory. Enter a Logo PIN code Use the Point ed buttons on the top control or Number buttons on the remote control to enter a number. When using top control Use the Point ed buttons on the top control to select a number. Press the Point 8 button to - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 52
projector and the remote control. For example, operating the projector in "Code 7", the remote control code also must be switched to "Code 7". To change the code for the projector Select a remote when you want to project images after the lamp becomes bright enough. The factory default setting is - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 53
is reconnected or any button on the top control or remote control is pressed. Shut down.......... When the lamp has been fully cooled down, the power will be On start When this function is set to "On," the projector will be automatically turned on just by connecting the AC power cord to a wall - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 54
projector and decreases the lamp life. Slant Select the projector's installation condition from the following options: Off When using the projector remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 55
Use the Point ed buttons on the top control or Number buttons on the remote control to enter a number. When using top control Use the Point ed buttons Press the SELECT button to close the dialog box. PIN code lock When the projector is locked with a PIN code, the PIN code lock symbol appears on the - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 56
available for use when setting up the projector. caution: when you have changed THE lamp counter. When the lamp life is left less than 100 hours, the Lamp replacement icon appears on the screen, indicating that the end of lamp life is approaching. When replacing the projection lamp, reset the lamp - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 57
used to set a frequency for the filter cleaning. When the projector reached a specified time between cleanings, a Filter warning icon ( This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp counter, and filter counter to the factory default - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 58
may accumulate on the optical elements degrading picture quality. Do not put anything into the air vents. Doing so may result in malfunction of the projector. Press and hold the filter cover and pull out the filter. NOTE: If the filter is heavily clogged and unable to clean, replace it with - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 59
" on the next page. Screw Handle Screws ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering, give the following information to the dealer. ● Model No. of your projector : PLC-ET30L ● Replacement Lamp Type No. : POA-LMP116 (Service Parts No. 610 335 8093) 59 - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 60
a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion. ● A Lamp may explode as a result of vibration - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 61
cannot be turned on and these indicators are still blinking, unplug the AC power cord and contact the service station. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. Top Control All five indicators are - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 62
, solvents, or other harsh chemicals might scratch the surface of the lens. When the projector is not in use, replace the lens cap. Cleaning the Projector Cabinet Unplug the AC power cord before cleaning. Gently wipe the projector body with a soft dry cleaning cloth. When the cabinet is heavily - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 63
Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. -Make sure you have properly connected the projector monitor output when connecting to the projector See your computer's instruction manual for the setting. - It takes - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 64
LAMP REPLACE indicator. If it lights, the end of lamp life is approaching. Replace the lamp with a new one promptly. See pages 59-60, 69. - Check the Lamp is distorted. - With maximum lens shift, image distortion may be OUT is plugged in, the projector's built-in speaker is not - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 65
lock. WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 66
PAL-N Sound Volume Mute Quit 0-63 On/Off Information Input H-sync freq. V-sync freq. Screen Language Lamp status Power management Security Key lock PIN code lock Remote control code Image Dynamic Standard Real ] Cinema v Image 1 Image 2 Image 3 Image 4 Image Adjust ] For Computer - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 67
Quit Quit Background Lamp control Blue/User/Black Auto 1 Auto 2 High Normal Eco 1 Eco 2 Pointer Spotlight/Pointer Remote control Quit Code L1/L2 Highland On/Off Security Key lock Off Projector (all) Projector (part) Remote control (all) Remote control (part) PIN code lock Off/On 1/ - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 68
Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center. Do not leave the projector on. It may cause an electric shock or a fire hazard. • • • lighting • • • blinking • • • off - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 69
"Freeze" (p.30), or "No show" (p.31). Indicators POWER green LAMP red LAMP REPLACE yellow Projector Condition The lamp cannot light up. (The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed.) The - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 70
Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 165 MHz of Dot Clock. PC Adjustment is limited - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 71
Appendix When an input signal is digital from the DVI terminal, refer to the chart below. PC Adjust Menu cannot be selected when Input 1 [RGB (PC digital)] is selected in the Input Menu. ON-SCREEN DISPLAY D-VGA D-480p D-575p D-SVGA D-XGA D-WXGA 1 D-WXGA 2 D-WXGA 3 D-WXGA 4 D-WXGA 5 D-WXGA 6 - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 72
LCD Panel System Panel Resolution Number of Pixels Signal Compatibility Color System High Definition TV Signal Scanning Frequency Multi-media Projector Projection Lamp Interface Input x 1 Audio (Mini Type stereo) x 1 Mini Type (Wired Remote) x 1 Mini DIN 8 pin x 1 USB Series B - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 73
Appendix Accessories Owner's Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries VGA Cable USB Cable Control Cable Lens Mount Cover PIN Code Label ● The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible standards. - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 74
Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. Projector Input Input 1 RGB (PC Analog) RGB (Scart) RGB (PC Digital) RGB (AV - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 75
Appendix Configurations of Terminals INPUT 1/ANALOG OUT Terminal: Analog RGB (Mini D-sub 15 pin) 54 32 1 10 9 8 7 6 15 14 13 12 11 Input 1 Red Input 2 Green Input 3 Blue Input 4 No Connect 5 Ground (Horiz.sync.) 6 Ground (Red) 7 Ground (Green) 8 Ground (Blue) 9 +5V Power 10 Ground (Vert.sync.) - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 76
Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 77
Dimensions Unit: inch (mm) 13.7 (348.1) 3.40 (86.4) 6.46 (164) Appendix 5º MAX 1.65 (41.9) 21.09 (535.7) 17.48 (444) 10.85 (275.5) 11.10 (282) 7.87 (200) Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) 77 - Sanyo ET30L | Instruction Manual, PLC-ET30L - Page 78
KF7AL-A SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
 |
 |
Multimedia Projector
MODEL
PLC-ET30L
Owner’s Manual
*Projection lens is optional.