Sanyo ET30L Instruction Manual, PLC-ET30L - Page 28
Operating with Projector Control, Lens Operation, Information
UPC - 086483069925
View all Sanyo ET30L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Basic Operation Operating with Projector Control Lens Operation The following lens operation can be made with the Lens button on the top control. Press the Lens button to enter each lens operation mode. The selected adjustment display appears on the screen. Top Control LENS button Lens Shift Adjustment Display "Lens shift" on the screen. Use the Point ed7 8 buttons to position the screen to the desired point without having picture distortion. The screen can be moved up or down to 50 percent, or sideways up to 15 percent from the central axis of the lens shift. ✔Note: • The arrow disappears at the maximum lens shift in each direction. Zoom Adjustment Display "Zoom" on the screen. Use the Point ed buttons to zoom in and out the image. Focus Adjustment Display "Focus" on the screen. Use the Point ed buttons to adjust focus of the image. ZOOM FOCUS INFO. button MENU button POINT buttons Information Information display can be used to confirm the current operating condition of the projector and the signal being projected through the projector. Press the INFO. button on the top control or remote control to display the information window on the screen. To hide the information window, press the INFO. button again or Point 7 8 buttons. The information window can also be selected from the menu. Information Menu Information Menu 28 * The H- and V-sync freq. values described in this figure may be different from the actual values.