Sanyo FW50C87F Owners Manual - Page 29

You may adjust picture quality and enhancement settings using Clear Pix Ultra HD and Advanced settings sub menus. Auto picture Backlight Contrast Brightness Color Tint Sharpness Clear Pix Ultra HD Advanced settings Pix shape Mode selection Horizontal position Dynamic contrast Off Color enhancement Minimum Black stretch Medium Brilliant Motion Rate Maximum 4K UHD Upscaling Global Dimming Noise reduction MPEG artifact reduction Dynamic To select the desired setting, then press OK contrast (Off, Minimum, Medium and Maximum) Color Off To set color enhancement to off enhancement On To make colors more vivid and bright Black To select the desired setting, then press OK stretch (Off, Minimum, Medium and Maximum) Brilliant To select the desired setting, then press OK Motion Rate (Off, Minimum, Medium and Maximum) 4K UHD To select the desired setting, then press OK Upscaling (Off, Minimum, Medium and Maximum) Global To select the desired setting, then press OK Dimming (Off, Minimum, Medium and Maximum) Noise To select the desired setting, then press OK reduction (Off, Minimum, Medium and Maximum) MPEG artifact reduction To select the desired setting, then press OK (Off, Minimum, Medium and Maximum) Auto picture Backlight Contrast Brightness Color Tint Sharpness Clear Pix Ultra HD Advanced settings Pix shape Mode selection Horizontal position Color alignment Mode Custom color management Red gain Gamma Green gain Blue stretch Blue gain Film mode Red offset HDR mode Green offset Blue offset Color alignment Mode To set the color temperature to Personal, Cool, Normal and Warm. When you adjust the following settings, Personal will be set automatically. Cursor I Cursor H Red gain To decrease red contrast To increase red contrast Green gain To decrease green contrast To increase green contrast Blue gain To decrease blue contrast To increase blue contrast Red offset To decrease red brightness To increase red brightness Green offset To decrease green To increase green brightness brightness Blue offset To decrease blue brightness To increase blue brightness 29 .English To select the desired setting, then press OK (Red, Yellow, Green, Cyan, Blue and Magenta) Cursor I Cursor H Custom color management Tint Saturation To adjust color hues, especially to make skin tones appear more natural. To decrease color To increase color with only selected with only selected color color To decrease To increase Brightness brightness with only brightness with only selected color selected color Gamma To select the desired setting, then press OK (Very Dark Room, Dark Room, Normal, Bright Room and Very Bright Room) Off To set blue stretch to off Blue stretch On If you switch on blue stretch, the part of the video signal without color turns bluish. Film mode Off Auto To set film mode to off To optimize the picture recorded by the original film Off To set HDR mode to off HDR mode * Auto Automatically switches to a dedicated picture quality setting when receiving HDR signal * HDR mode is only available if your television's serial number starts with: DS1. Your serial number can be confirmed on the rating label applied on the rear cabinet. Note(s) ● Mode selection is available only if - The external input modes are selected HDMI 1, HDMI 2 or HDMI 3. - The connected HDMI device is outputting a video signal. Continued on next page.