Sanyo FW55C46F Owners Manual - Page 9
Stand Assembly, Attaching the Base, M5 x 0.472
View all Sanyo FW55C46F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Stand Assembly (FW55C46F) (FW43C46F) 1 2 1 9 .English M4 x 0.472" (12mm) × 4 M5 x 0.472" (12mm) × 2 Attaching the Base You must attach the base to the Unit to have it as a table top Unit. Be sure the front and rear of the base match the proper direction. For large screen TVs, at least 2 people are required for these steps. (FW55C46F) 1 2 × 3 M4 x 0.787" (20mm) Note(s) ● Make sure to use a table which can support the weight of this Unit and is larger than this Unit. ● Make sure the table is in a stable location. ● When attaching the base, ensure that All Screws are tightly fastened. If the base is not properly attached, it could cause the Unit to fall, resulting in injuries as well as damage to the Unit. ● To remove the base from this Unit, unscrew the Phillips head screws by reversing the procedure. Be careful not to drop the base when you remove it. 2 × 4 M4 x 0.472" (12mm) Continued on next page.