Sanyo PDG-DHT100L Instruction Manual, PDG-DHT100L
Sanyo PDG-DHT100L - DLP Projector - HD 1080p Manual
 |
View all Sanyo PDG-DHT100L manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo PDG-DHT100L manual content summary:
- Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 1
Multimedia Projector MODEL PDG-DHT100L = Projection lens is optional. Owner's Manual - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 2
Features and Design This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features. - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 3
63 Resetting the Filter Counter 64 Resetting the Scroll Counter 64 Lamp Management 65 Lamp Replacement 66 Optional Color Wheel Installation 68 Cleaning the Projection Lens 69 Cleaning the Projector Cabinet 69 Warning Indicators 70 Appendix 71 Troubleshooting 71 Menu Tree - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 4
of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 5
service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following the operating instructions - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 6
Safety Instructions Air Circulation Openings in the cabinet are provided for ventilation. to cool down the projector. The fans' running speed is changed according to the temperature inside the projector. IMPORTANT! Filter Maintenance!! The projector uses a lamp which generates significant heat. - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 7
Safety Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 8
by courier or any other transport service, consult your dealer. -Do not put the projector in a case before it is cooled enough. -Do not transport the projector with a replacement lens installed. How to move the projector by one person When moving the projector by one person, grip handles and - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 9
for a Class A digital device, pursuant to Part instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user is a safety feature to be sure that the plug will fit into - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 10
Cord Connector Lamp Cover =Kensington Security Slot This slot is for a Kensington lock used to deter theft of the projector. *Kensington is a registered trademark of ACCO Brands Corporation. Back Infrared Remote Receiver (Rear) Air Intake Vent Air Filter Cover Exhaust - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 11
used to service the projector. J5 BNC computer output (Digital/DVI-D type projector to this terminal. R/C JACK When using the wired remote control, connect the wired remote control to this jack with a remote control cable (not supplied). LAN port Connecting the LAN cable. See the owner's manual - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 12
L H DON/STAND-BY button Turn the projector on or off. (pp.24,25) JSHUTTER LENS SHIFT function. (p.28) INPUT button Select an input source INPUT 1, INPUT 2, Input 3 or Input 4. (pp.32-34) SELECT button Used to execute the selected item. (p.26) It is also used to expand image in DIGITAL - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 13
57, 77-79) JLAMP Indicator This indicator is dim when the projector is turned on. And bright when the projector is in stand-by mode. (pp.77-79) 8WARNING TEMP. indicator This indicator flashes red when internal projector temperature is too high. (pp.70, 77-79) EWARNING FILTER indicator -Blink slow - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 14
heat. •For cleaning, use a soft dry cloth. Do not apply benzene, thinner, spray, or any other chemical materials. 14 DON/STAND-BY button Turn the projector on or off. (pp.24-25) JAUTO PC button Automatically adjust the computer image to its optimum setting. (pp.30, 36) 8LIGHT button Light the - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 15
Part Names and Functions Remote Control Battery Installation 1 Open the battery compartment lid. 2 Install new batteries into the compartment. 3 Replace the compartment lid. Pull up the lid and remove it. Two AA size batteries For correct polarity (+ and -), be sure battery terminals are in - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 16
release the IMAGE ADJ. button the number of corresponding times you would like to set the number of the remote control code for the projector. Reset position Use position Reset switch Remote Control Code Code 1 Code 2 Code 3 Code 4 Code 5 Code 6 Code 7 Code 8 Number of Times Pressing IMAGE ADJ - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 17
. For the specifications of Projection Lens, contact sales dealer where you purchased the projector. - Lens installation and replacement should be made by the qualified service personnel. - When setting the projector after lens installation, be sure to replace a Lens Cap to protect a surface. - When - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 18
to leftmost. When the lens is shifted to rightmost. Picture Level and Pitch Adjustment The projection angle is adjustable up to 5 degrees upward and downward respectively by rotating front and back feet. To raise the projector, rotate the feet clockwise. To lower the projector or to retract the - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 19
Replacement of Terminal Note: • In the event of replacement of interface board, turn off the projector, press the Main On/Off Switch to Off and unplug the AC power cord from the AC outlet information menu. (See page 29) Screws Guide Socket Plug Figure shows HD DATA WIRELESS Receiver Board 19 - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 20
Installation Connecting to Computer Cables used for connection • VGA Cable (D-sub 15 pin) - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 21
Installation Connecting to Video Equipment Cables used for connection • Video Cable (BNC x 3, BNC x 1) • SCART-VGA Cable - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 22
with the provided straps to prevent the covers from falling off. Follow these steps to attach the support cover and cable cover. 1 Tie a strap (supplied) to the lower bracket on the right side of the projector's terminal area. (See the right figure.) 2 Fix the opposite end of the strap to the hole - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 23
system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning on the projector. A fixing bracket is provided to prevent the AC power cord from coming loose. Follow these steps to - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 24
service center. 24 16 The preparation display will disappear after 20 seconds. Selected Input Source and Lamp control Lamp status See page 65 for the Lamp mode status Note: •The Lamp replacement icon and the Filter warning icon may appear on the screen depending on the usage state of the projector - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 25
WILL RESULT IN SHORTENING OF THE LAMP LIFE. Note: •When the On start function is set to "On," the projector will be turned on automatically is changed according to the temperature inside the projector. •Do not put the projector in a case before the projector is cooled enough. •If the WARNING TEMP. - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 26
Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. 1 Press the MENU button on the side control or the remote control to display the On-Screen Menu - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 27
Custom/Digital zoom +/-/Keystone/Ceiling/Rear/Reset/] (pp.40-41). - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 28
Projector Control Zoom Adjustment Display "Zoom" on the screen. Press the ZOOM button and then press the point ! buttons to zoom in and out the image. Focus Adjustment Display "Focus" on the screen. Press the FOCUS button and then press the point ! buttons to adjust the focus of the image. Lens - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 29
Basic Operation Information Information display can be used to confirm the current operating condition of the projector and the signal being projected through the projector. Press the INFORMATION button to display the information window on the screen. Press the Point - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 30
can be done easily by pressing this button. See page 36 for details. LENS SHIFT button See page 28 for details. ZOOM buttons Press the ZOOM buttons D.ZOOM button Press the D.ZOOM button on the remote control to enter to the Digital zoom +/- mode. See page 41 for details. INFO. button Press the INFO - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 31
the P-TIMER button. To cancel the P-TIMER, press the P-TIMER button again. Remote Control SHUTTER button IMAGE ADJ. button P-TIMER button FILTER button KEYSTONE button IMAGE SEL. button Note: •See the previous page for the description of other buttons. P-Timer display KEYSTONE button Press - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 32
slots cannot be selected. •When a slot is empty, the input is displayed in grayout. 32 INPUT 1 button Input 1 RGB (PC analog) RGB (Scart) RGB (PC digital) RGB (AV HDCP) HDMI INPUT 2 button Input 2 RGB Y,Pb/Cb,Pr/Cr Video S-video - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 33
Input Selection Computer Input Source Selection Menu Operation When Selecting the INPUT 1 with DVI/D-sub 15 terminals 1 Press the MENU button to display the On-Screen Menu. Use the Point - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 34
content which is delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP. •When a slot - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 35
. (pp.37- 38.) There is no signal input from the computer. Check the connection between your computer and the projector. (See "Troubleshooting" on page 71.) Mode 1 The preset system is manually adjusted in the PC Adjust Menu. The adjusted data can be stored in the Mode 1-10. (pp.37-38) SVGA - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 36
Computer Input Auto PC Adjustment Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer. Direct Operation The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 37
to match those special signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. Note: The PC Adjust Menu cannot be operated when the digital signal input on the DVI terminal is selected - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 38
Computer Input Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures. Mode free To clear the adjusted data, select Mode free and then press the SELECT button. Move the red - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 39
Image Level Selection Direct Operation Press the IMAGE SEL. button on the remote control to select the desired image level. Remote Control Computer Input Standard Real Dynamic Image1 • • • Image 10 IMAGE SEL. button Menu Operation 1 Press the MENU button to display the On-Screen Menu. Use the - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 40
Computer Input Screen Size Adjustment Select the desired screen size that conforms to the input signal source. 1 Press the MENU button to display the On-Screen Menu. Use the Point - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 41
Computer Input Keystone This function is used to store or reset the keystone correction when the Main On/Off Switch is pressed to Off or the AC power cord is unplugged. Use the Point - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 42
Video Input Video System Selection 1 Press the MENU button to display the On-Screen Menu. Use the Point - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 43
Image Level Selection Direct Operation Press the IMAGE SEL. button on the remote control to select the desired image level. Remote Control Video Input Standard Cinema Dynamic Image1 • • • Image 10 IMAGE SEL. button Menu Operation 1 Press the MENU button to display the On-Screen Menu. Use the - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 44
Video Input Screen Size Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 45
Keystone This function is used to store or reset the keystone correction when the Main On/Off Switch is pressed to Off or the AC power cord is unplugged. Use the Point - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 46
Picture Image Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 47
COLOR SELECTION MODE (continued) COLOR M. Return to the COLOR MANAGEMENT POINTER. (If you press the MENU button on the side control or the remote control, it returns to the COLOR MANAGEMENT POINTER and you will need to reselect and readjust the color.) MENU Return to the IMAGE ADJUST Menu. Any - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 48
Picture Image White balance (Red/Green/Blue) Press the Point button to lighten red/green/blue tone; press the Point button to deepen red/green/blue tone (from 0 to 63). Offset (Red/Green/Blue) Press the Point button to lighten red/green/blue tone of the black level of an image; press the Point - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 49
Setting Setting This projector has a Setting menu that allows you to set up other various functions. 1 Press the MENU button to display the On-Screen Menu. Use the Point - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 50
. . Blue colored background. User . . . The image you captured. Black. . . Black colored background. Lamp mode This projector is equipped with 2 projection lamps and the number of using lamps can be switched to 2 lamps or 1 lamp. Using 1 lamp maintains the life of projection lamps. Press the SELECT - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 51
Setting Picture in Picture This function is used to project two videos simultaneously by placing a separate small sub screen within the main screen. Use the Point ! buttons to move the red frame pointer to Picture in Picture and then press the SELECT button to display a dialog box. Use the Point - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 52
Setting Edge blending This function allows multiple projector images to be seamlessly overlapped. Use the Point ! buttons to move the red frame pointer to Edge blending and then press the SELECT button to display a dialog box. Use the Point ! - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 53
Setting Advanced color matching. . . . .Set to 'On' to activate the 'Advanced color matching'. When it is set to 'Off', all items except for 'Test pattern' are displayed in grayout and cannot be adjusted. Measured When using the color wheel set optimized for high brightness, the chromatic - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 54
vary from equipment to equipment. For details, refer to the owner's manual of video equipment. When the black parts of the image are destroyed or function and set it to "User". Then the captured image will be displayed the next time you turn on the projector. Capture To cancel the Capture - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 55
number and move the red frame pointer to the next box. The number changes to "3." Repeat this step to complete entering a four-digit number. After entering the four-digit number, move the pointer to "Set." Press the SELECT button so that you can change the Logo PIN code lock setting. If you - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 56
of the filter use is automatically set to 0. Fan control Choose the running speed of cooling fans from the following options. Normal....... Normal speed. Max Faster than the normal speed. Remote control The eight different remote control codes (Code 1-Code 8) are assigned to the projector; the - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 57
Setting Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not used for a certain period. If the input signal is interrupted and no button is pressed for more than 30 seconds, the - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 58
and unable to operate the projector, contact the service station. PIN code lock This function prevents the projector from being operated by unauthorized ON, the projector can be operated without a PIN code. Whenever you change the PIN code lock setting or the PIN code (the four-digit number), you - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 59
the number and move the red frame pointer to the next box. The number changes to "3." Repeat this step to complete entering a four-digit number. After entering the four-digit number, move the pointer to "Set." Press the SELECT button so that you can change the PIN code lock setting . If you - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 60
to prohibit the shutter operation from both of the remote control and the side control. Management The Shutter Management function turns off the projection lamp when the projector is left with the shutter closed and the set time has passed away. The count-down time can be set between 5 and 180 - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 61
and the Scrolls remaining option. Used Time Show the total accumulated time of the filter use, timer setting option and the Reset options. When the projector reaches a time set in the timer setting, the Filter replacement icon (Fig. 1) appears on the screen and the total accumulated time turns red - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 62
Instructions Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans' effectiveness and may result in internal heat buildup and adversely affect the life of the projector. This projector - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 63
on a lens or optical elements inside the projector. Such condition may degrade the quality of the projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning. ORDER REPLACEMENT FILTER CARTRIDGE Replacement filter cartridge can - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 64
Maintenance and Care Resetting the Filter Counter Be sure to reset the Filter counter after replacing the filter cartridge. 1 Press the MENU button to display the On-Screen Menu. Use the Point - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 65
changes the lighting lamp (Lamp Mode) by detecting the status of lamp. When either of the 2 lamps is out, the projector operates with 1 lamp. The Lamp Mode can be switched to 2 lamps or 1 lamp manually. Refer to the SETTING section on page 50. 2 LAMP MODE 1 LAMP MODE When Lamp 1 is burnt out - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 66
screws. Make sure the Lamp is set properly. 6 Put the Lamp Cover back and tighten a screw. SCREWS LAMP 2 Make sure which number of lamp needs to be replaced on Lamp Status Display. Figure shows case of replacing LAMP 2. CAUTION : DO NOT OPERATE THE PROJECTOR WHILE ANY OF LAMPS IS REMOVED. IT MAY - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 67
Maintenance and Care ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer. - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 68
On/Off Switch to Off SCREW and unplug the AC power cord from the AC outlet. Let the projector cool for at least 45 minutes. LAMP 2 Loosen a screw on the Lamp Cover. Slide and open the Lamp Cover until it makes a clicking sound. (See the right COVER figure.) 3 Loosen three screws and pull out - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 69
other harsh chemicals might scratch the surface of the lens. Cleaning the Projector Cabinet Turn off the projector, press the Main On/Off Switch to Off and surface of the cabinet. When the projector is not in use, put the projector in an appropriate carrying case to protect it from dust and - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 70
been installed near an Air-Conditioning/ Heating Duct or Vent? Move the installation of the projector away from the duct or vent. - Is the filter clean? Replace the filter with a new one. The projector is shut down; and the LAMP indicator is lighting and other indicators are blinking. When the - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 71
input signal is correctly output from your computer. Some laptop computers may need to be changed the setting for monitor output when connected to the projector. See your computer's instruction manual for the setting. - It takes about 20 seconds to display an image after turning on the - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 72
lamp life is approaching. Replace the lamp with a new one promptly. (See page 66) - The filter is out of scroll. Replace the filter cartridge with a new one promptly. (See pages 62-63) appears on the screen The image is out of focus. - Adjust the focus of the projector. - Check Projection Lens - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 73
center. WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 74
RGB (PC analog) RGB (Scart) RGB (PC digital) RGB (AV HDCP) HDMI RGB Y, Pb/Cb, Lamp mode Lamp control Lamp interval Lamp 1 Lamp 2 Filter counter Power management Security Key lock PIN code lock Remote control Shutter management Remote Control Projector Color wheel type 5 - 180 Min Lens - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 75
The Menu display varies depending on the input signal. Appendix Image Select Screen Standard Real Dynamic Image 1 Image 10 Normal True Full Custom Digital zoom + Digital zoom Keystone Ceiling Rear Reset Quit Scale H &V Position Common Reset H /V On/Off H /V Quit Store Reset On/Off On/Off Yes - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 76
matching DynamicBlack HDMI setup Logo Filter control Fan control Remote Control Normal/Max Code 1 12 languages provided. Quit Position/Simple Menu/Menu size/Quit Off/Countdown Off/On Blue/User/Black 2-Lamps/Lamp1/Lamp2 Lamp control Normal/Eco1/Eco2 Lamp life control Mode 1/Mode 2 Off/Auto - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 77
Condition Check the indicators for the projector condition. The projector is operating normally. LAMP red Indicators POWER WARNING WARNING TEMP. FILTER SHUTTER LAMP 1/2 REP. green red orange blue orange Projector Condition The projector is off. (The main On/Off switch is OFF position - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 78
on with the ON/ STAND-BY button.) = = = When either of the 2 lamps is out, the projector operates with 1 lamp. = = = = = The lamp has been used overtime. Replace the lamp immediately. WARNING FILTER When the filter detects clogging, reaches a time set in the timer setting or runs out of - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 79
is detecting abnormal condition. LAMP red Indicators POWER WARNING WARNING TEMP. FILTER SHUTTER LAMP 1/2 REP. green red orange blue orange Projector Condition = Fig.2 Filter replacement icon Fig.3 Fig.4 Filter cartridge replacement icon If the Filter counter reached a time set - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 80
Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 230 MHz of Dot Clock. ON-SCREEN DISPLAY VGA 1 - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 81
125 27.000 30.000 25.000 24.000 60.000 50.000 60.000 50.000 48.000 When an input signal is digital from the DVI terminal, refer to the chart below. ON-SCREEN DISPLAY D-VGA D-480p D-575p D-SVGA D-XGA D-WXGA 1 D- than above are inputted, however the functions of the projector could be limited. 81 - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 82
On-Board Input1 Input2 Dsub Dsub -DVI Optional Interface Board Component -S-video Component HDCP -DVI HD SDI wireless HD Data Wireless Digital Digital Scart Analog PC Component Analog PC Video/ S-video Component Analog PC Digital Scart Analog PC Analog PC Video/ S-Video Component Analog PC - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 83
Temperature Remote Control Battery Operating Range Dimensions Net Weight Accessories Owner's Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries VGA Cable PIN Code Label Cable covers (support cover & cover) Fixing bracket for power cord Rich color reproduction color - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 84
may recognize different white balance and color uniformity on each projector. Optional Parts The parts listed below are optionally available. When Interface Board (HD DATA Wireless Receiver) : POA-MD26HDWL HD DATA Wireless Transmitter Box : POA-HDTM01 Note: • Between the two features of the - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 85
Appendix Configurations of Terminals ANALOG (Mini D-sub 15 pin) 54 32 1 10 9 8 7 6 15 14 13 12 11 DIGITAL DVI-D (DVI 24 PIN) 12345678 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Input 1 Red Input 2 Green Input 3 - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 86
with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Logo PIN Code Lock No. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* *Should the four-digit - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 87
Dimensions Unit: inch (mm) 5.0º 4.45(113.0) Appendix 0.28(7.0) 15.75(400.0) 9.21(234.0) 9.55(242.5) Screw Holes for Ceiling Mount Screw: M8 Depth: 0.393 (10.0) 6.81(173.0) 6.81(173.0) 6.02(153.0) 5.63(143.0) 2.64(67.0) 4.65(118.0) 5.08(129.0) 4.25(108.0) 12.48(317.0) 14.29(363.0) 20.47( - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 88
C05 C06 C07 C08 C0D C0E C0F C10 C1C C1D C3A Function Turn the projector ON Turn the projector OFF (immediately OFF) Select Input 1 Select Input 2 Select Input 3 Select Input DOWN Focus UP Lens shift UP Lens shift DOWN Lens shift LEFT Lens shift RIGHT Auto PC Adj. Keystone UP Keystone DOWN - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 89
down Cooling down after the projector is turned off when the lamps are out. Stand-by mode after Cooling down when the lamps are out. Stand-by 12.3˚C, S2 = 23.4˚C, S3 = 34.5˚C --> The projector displays "12.3 23.4 34.5" (For each sensor, two digit and the tenth place numbers are displayed with a space - Sanyo PDG-DHT100L | Instruction Manual, PDG-DHT100L - Page 90
KT5AL-A SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
 |
 |
Multimedia Projector
MODEL
PDG-DHT100L
Owner’s Manual
Projection lens is optional.