Sanyo PDG-DHT8000L RS232C Expand

Sanyo PDG-DHT8000L - 8000 Lumens Manual

Get Sanyo PDG-DHT8000L - 8000 Lumens PDF manuals and user guides View all Sanyo PDG-DHT8000L manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PDG-DHT8000L manual content summary:

  • Sanyo PDG-DHT8000L | RS232C Expand - Page 1
    EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PDG-DHT8000L Ver.1.00 SANYO Electric Co., Ltd DS Company Projector Business Division
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 2
    PDG-DHT8000L Expand Serial Command Functional Specifications CONTENTS 1 Overview ...10 2 Serial Interface Specification 10 2.1 Transfer Specification Read Command Table 17 6.5 Screen Status Read Command Table 17 6.6 Lamp Status Read Command Table 17 6.7 Setting Status Read Command Table 18
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 3
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.4.11 CF_SHARP Command 24 8.4.12 CF_GAMMA Command 25 8.4.13 Command 35 8.7.9 CF_HSCALE Command 36 8.7.10 CF_HPOS Command 36 8.8 Lamp Command...37 8.8.1 CF_LAMPMODE Command 37 8.8.2 CF_AUTOLAMPCONTRL Command 37 8.8.3
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 4
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9 Setting Command ...38 8.9.1 CF_LANG Command 38 8.9.2 CF_ MENUPOSITION Command 38 8.9.3 CF_SIMPLEMENU Command 38 8.9.4 CF_MENUSIZE Command 39 8.9.5 CF_DISP Command 39 8.9.6 CF_BACKGND Command 39 8.9.7 CF_PIP Command 39 8.9.8
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 5
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.40 CF_LOGO Command 49 8.9.41 CF_FANSPEED Command 50 8.9.42 CF_RCODE Command 50 8.9.43 CF_RSENS Command 50 8.9.44 CF_P-MANE Command 51 8.9.45 CF_P-MANETIME Command
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 6
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.4.4 CR_TINT Command 60 9.4.5 CR_APCTRL Command 60 9.4.6 CR_COLTEMP Command 61 9.4.7 CR_WBAL-R Command 61 9.4.8 CR_WBAL-G Command 61 9.4.9 CR_WBAL-B Command 61 9.4.10 CR_OFFSET-R Command 61 9.4.11 CR_OFFSET-G Command
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 7
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.7.11 CR_NMSLOT1 Command 73 9.7.12 CR_NMSLOT2 Command 73 9.7.13 CR_VPOS Command 77 9.8.7 CR_HSCALE Command 77 9.8.8 CR_HPOS Command 77 9.9 Lamp Status Read Commands 78 9.9.1 CR_LAMPREPL Command 78 9.9.2 CR_LAMPMODE Command 78
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 8
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.11 CR_P-MANE Command 83 9.10.12 CR_P-MANETIME Command 83 9.10.13 CR_ONSTA Command 83 9.10.14 CR_SECURITY Command 83 9.10.15 CR_PJLOCKNOW
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 9
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.51 CR_CMMSTESTPAT Command 93 9.10.52 CR_CMTGTESTPAT 13 CR_COLWHEELTYPE Command 99 10 Command with Address Specification 100 10.1. Overview ...100 10.2. Functional Execution Command with address 100 10.2.1. Format ...100 10.2.2.
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 10
    Expand Serial Command Functional Specifications 1 Overview This Functional Specification defines communication for PDG-DHT8000L. Most commands are also available to remote-control a projector through RS-232C from a computer. Therefore, commands are defined as Expand Serial Commands. The operation
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 11
    PDG-DHT8000L Expand Serial Command Functional Specifications 3 Notes for communication Expand Serial Command is defined as a single command per line that starts with "C" and ends with carriage return (0x0D). When a projector receives carriage return (0x0D), it starts decoding. There are two
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 12
    PDG-DHT8000L Expand Serial Command Functional Specifications 4 Notation Data from a controller to a projector is represented as COMMAND, and data from a projector to a controller in response to the incoming command is represented as RESPONSE. [CR]: Carriage Return Code The command ends with carriage
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 13
    PDG-DHT8000L Expand Serial Command Functional Specifications 5 Functional Execution Command Table 5.1 Image Command Table Execute command Item CF_CONT_%1[CR] CF_BRIGHT_%1[CR] CF_COLOR_%1[CR] CF_TINT_%1[CR] Set value of Contrast Set value of
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 14
    PDG-DHT8000L Expand Serial Command Functional Specifications 5.3 Input Control Command Table Execute command Item CF_INPUT_%1[CR] CF_SOURCE_ %1[CR] Item Select lamp mode Switch dimmer function levels of Normal/Auto/Eco Select Lamp life control Set Lamp interval 5.6 Setting Command
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 15
    PDG-DHT8000L Expand Serial Command Functional Specifications ] CF_DELAYCTRL_%1[CR] Delete the values registered in User %1 and return it to Free status. Reset Filter used time Set time to display Filter cleaning / replacement warning on screen Execute operation of scroll of filter Reset Filter
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 16
    PDG-DHT8000L Expand Serial Command Functional Specifications CF_CCAPTIONDISP_%1[CR] CF_CCAPTIONCOLOR_%1[CR] CF_FRAMELOCK_%1[CR] CF_FRAMELOCKADJ_%1[CR] CF_FRAMELOCKRST_%1[CR] Set channel of Closed caption Set color of Closed caption Set Frame lock function Set
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 17
    PDG-DHT8000L Expand Serial Command Functional Specifications CR_SETPCADJ [CR] CR_ORGMODE [CR] CR_PCSTORE [CR Position 6.6 Lamp Status Read Command Table Status read command CR_LAMPREPL [CR] Item Get information on Lamp replacement time CR_LAMPMODE [CR] Get selected Lamp mode CR_AUTOLAMPCONTROL
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 18
    PDG-DHT8000L Expand Serial Command Functional Specifications CR_INFLAMP [CR] CR_PROJH [CR] CR_HMLAMP [CR] CR_LAMPH [CR] CR_LAMPCORRESPH [CR] CR_LAMPINTERVAL [CR] CR_LAMPLIFECONTROL [CR] Get Lamp switching status Get the projector total running time Get the total number of lamps Get information of
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 19
    PDG-DHT8000L Expand Serial Command Functional Specifications CR_PIPSIZE[CR] CR_PIPFRAMELOCK[CR] CR_PIPSTORE[CR] CR_EDGEBLENDING[CR] Shutter CR_OPTCTRLNO[CR] Get Option control No. of the projector CR_LENSTYPE[CR] Get Lens type currently installed CR_COLWHEELTYPE[CR] Get Color wheel type
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 20
    PDG-DHT8000L Expand Serial Command Functional Specifications 7 Error Code Table Error Code ? 000 101 102 103 201 301 402 Contents -When the received data cannot be decoded -Parameter designation error (wrong digit
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 21
    PDG-DHT8000L Expand Serial Command Functional Specifications 8 Functional Execution Command 8.1 Format 1) PC issues a command in the format below: limited (Status Read Commands are available in following status) Projector Status Available Functional Execution Command In Standby status C00:
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 22
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.4 Image Command 8.4.1 CF_ CONT Command Command "CF_CONT_ 1 Details Set user controlled value of Contrast. (Available only in the normal Power ON status) The value set by this command is not stored in the projector. Therefore, when
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 23
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.4.5 CF_COLMNSAV Command Command "CF_COLMNSAV_%1" [CR] %1 "000 the normal Power ON status) The value set by this command is not stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 24
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.4.9 CF_WBAL- Command Command "CF_WBAL-%1_%2" [CR] "R RED Details Set user controlled value of Sharpness. (Available only in the normal Power ON status) The value set by this command is not stored in the projector's memory.
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 25
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.4.12 CF_GAMMA Command Command "CF_GAMMA_%1" [CR] "000-015 Directly specify setting value of Gamma %1 "UP Increment setting value of Gamma by 1 "DN Decrement setting value of Gamma by 1 Details Set user in the projector's memory
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 26
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.4.16 CF_IMAGE Command Command "CF_IMAGE__%1" [CR] " user) Details Select Image mode. (Valid only when it is in the normal Power ON status.) Parameter "CUSTOM1" to "CUSTOM10" corresponds to "Image1" to "Image10" displayed in projector
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 27
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.5 PC Control Command 8.5.1 CF_FSYNC Command Command "CF_FSYNC_%1" normal Power ON status) The value set by this command is not stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 28
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.5.4 CF_V-POS Command Command "CF_V-POS_%1" [CR] "0000-nnnn the normal Power ON status). The value set by this command is not stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 29
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.5.7 CF_DLINE Command Command "CF_DLINE_%1" [CR] "0100-nnnn Directly this command. This command is used to specify projector internal settings such as whether or not to get PC signal through IP (Available only in the normal Power ON
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 30
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.5.10 CF_PCSTORE Command Command "CF_PCSTORE_%1" [CR] "MODE1 Store current PC Adjust status to Mode1 "MODE2 Store current PC Adjust status to Mode2 "MODE3 Store current
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 31
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command "CF_INPUT_%1" [CR] "1 Select .) This command works the same way as "INPUT" button of the projector and remote control. Response Acceptable "000" [CR] Unacceptable "Error Code
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 32
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.6.4 CF_SYSTEM Command Command "CF_SYSTEM_%1" [CR] Input is PC Analog "VGA1 Select VGA1 : "WXGA3 Select WXGA3 "1080I Select 1080i "1035I Select 1035i "720p Select 720p "575p
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 33
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.1 CF_SCREEN Command Command "CF_SCREEN_%1" [CR] "NORMAL Select Normal mode "ZOOM Select Zoom mode "TRUE Select True mode "FULL Select Full mode Input
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 34
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.7.3 CF_KEYSTONE Command Command "CF_KEYSTONE _%1" [CR] "UP Details Change level of Keystone distortion correction (Available only in the normal Power ON status). When reached the limit of the correction level, projector accepts
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 35
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.7.6 CF_REAR Command Command "CF_REAR_%1" [CR] %1 "ON Set Rear to ON "OFF Set Rear to OFF Details Set/Cancel Rear. (Valid only when in the normal
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 36
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.7.9 CF_HSCALE Command Command "CF_HSCALE_%1" [CR] "035 35 "031 31 "002 2 "001 1 "000 0 %1 " 01 1 " 02 2 Details Response " 31 31 " 32 32 "UP Increment setting value of
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 37
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.8 Lamp Command 8.8.1 CF_LAMPMODE Command Command "CF_LAMPMODE_%1" [CR] "FULL Set lamp mode to 2-lamp (FULL) %1 "LAMP1 Set lamp1 mode "LAMP2 Set lamp2 mode Details Select Lamp mode. (Valid only when in the normal Power ON
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 38
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9 Setting Command 8.9.1 CF_LANG Command Command "CF_LANG_%1" [CR] "ENG Select ENGLISH "DEU Select German "FRA Select French "ITA Select Italian "ESP Select Spanish %1 "POR Select Portuguese "
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 39
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.4 CF_MENUSIZE Command Command "CF_MENUSIZE_%1" [CR] %1 EEPROM and the setting remains even after the power is turned to ALL OFF status. *When 1="USER" is received, error code "101" is returned, in the case of Capture non-practice.
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 40
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.8 CF_PIPMODE Command Command "CF_PIPMODE_%1" [CR] %1 "PINP Select P ". (Valid only when in the normal Power ON status.) * In the case of a specific status, return Error Code "101" [CR] and the command is not executed. - When
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 41
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.10 CF_PIPSUBINPU Command Command "CF_PIPSUBINP_%1_%2" [CR] "1 Select Input 1 (Valid only when in the normal Power ON status.) * In the case of a specific status, return "101" [CR] and the command is not executed. - When selected
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 42
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.12 CF_PIPPOSITION User 1 "USER2"---- Store current setting status to User 2 %1 "USER3"---- Store current setting status to User 3 "USER4"---- Store current setting status to User 4 "USER5"---- Store current setting status to User
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 43
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.15 CF_PIPMODEFREE Command Command "CF_PIPMODEFREE_%1" [CR] "USER1 Set User1 to Free status "USER 2 Set User2 to Free status %1 "USER 3 Set User3 to Free status "USER 4 Set User4 to Free status "USER limit changes by choice
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 44
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.19 CF_BLENDBLK Command Command "CF_BLENDBLK_%1_%2" [CR] "R Red %1 "G Green "B Blue %2 "-127" ~ "0127 Directly specify value of color of %1 Details Set value of color specified by
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 45
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.23 CF_BLENDMENUOFF Command Command "CF_BLENDMENUOFF_%1" [CR] %1 "SET Temporarily hide Edge blending menu and edge line "RST Display Edge blending menu and edge line Details Set
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 46
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.27 CF_CMMSL Command Command "CF_CMMSL_%1_%2" [CR] "RED Set value of Red "GREEN Set value of Green %1 "BLUE Set value of Blue "WHITE Set value
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 47
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.30 CF_CMAUTOTESTPAT Command Command "CF_CMAUTOTESTPAT_%1" [CR] %1 "ON Set to On "OFF Set to Off Details Set Auto test pattern of Color matching. (Available only in
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 48
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.34 CF_CMTGTESTPAT Command Command "CF_CMTGTESTPAT_%1" [CR] "RED Display Red "GREEN Display Green "BLUE Display Blue %1 "WHITE Display White "CYAN Display Cyan "MAGENTA Display Magenta "YELLOW
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 49
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.38 CF_DYNAMICBLACK Command Command "CF_DYNAMICBLACK_%1" [ PIN code switches Logo but Logo Lock is not cancelled (Lock status is kept). *When 2="USER" is received, error code "101" is returned, in the case of Capture non-practice.
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 50
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.41 CF_FANSPEED projector "FRONTBACK Select both front and back receiver of projector "FRONT Select only front receiver of projector %1 "TOP Select only top receiver of projector "BACK Select only back receiver of projector
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 51
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.44 CF_P-MANE Command Command "CF_P-MANE_%1" [CR] "OFF Set Power Management to Off "READY Set Power Management to Ready %1 "SHUTDOWN Set Power Management to
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 52
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.47 CF_PJPINCODE Command Command "CF_PJPINCODE_%1" [CR] %1 "0000 - 9999 Directly specify PJ PIN code Details Enter PIN code to cancel PIN code lock (Available only in the normal Power ON status) PIN code can not be changed. (Only
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 53
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.51 CF_FILSCRL Command Command "CF_FILSCRL_%1" [CR] %1 "RST Reset Filter scroll counter Details Reset Filter scroll counter Acceptable Response Acceptable Unacceptable Unacceptable 8.9.52 CF_TESTPAT Command Command "
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 54
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.55 CF_SHUTRCPROT Command Command "CF_SHUTRCPROT_%1" [CR] %1 "ON Disable RC key from controlling Shutter (Protection On) "OFF Enable RC key to control Shutter (Protection Off) Details
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 55
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.59 CF_SHUTRELEASE Command Command "CF_SHUTRELEASE_%1" [CR] %1 "ANY"----------Enable to release Shutter with any key "SHUTTER Enable to release Shutter with only "SHUTTER" key Details Set
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 56
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.62 CF_CCAPTIONCOLOR Command Command "CF_CCAPTIONCOLOR _%1" [CR] DN Search frame lock frequency downward. Details Search Frame lock frequency and set manually. (Valid only when in the normal Power ON status) Acceptable Response
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 57
    PDG-DHT8000L Expand Serial Command Functional Specifications Auto PC Adj. operation "LENSSHIFT" ----------Return the Lens to center position The same operation as Control Key. parameter - When User menu is displayed: function is carried out with having displayed User menu. - When User menu isn't
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 58
    PDG-DHT8000L Expand Serial Command Functional Specifications 8.10.3 CF_POWER Command Command "CF_POWER_%1" [CR] "ON Power ON "OFF Power OFF * Issuing another command during countdown process forced countdown operation to be terminated. * Error Code is returned in some projector statuses,
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 59
    PDG-DHT8000L Expand Serial Command Functional Specifications 9 Status Read Command 9.1 Format 1) PC issues a command in the format below: "CR_Command" [CR] Command: String 2) When the projector receives the applicable command, it returns the required information as a data string. "000_" %1 [CR] %1:
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 60
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.4 Image Status Read Commands 9.4.1 CR_CONT Command Command "CR_CONT" [CR] Details Get user controlled value of Contrast Acceptable Response %1 "000_%1" [CR] "000" - "063" Unacceptable "?" [CR] 9.4.2 CR_BRIGHT Command Command "
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 61
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.4.6 CR_COLTEMP Command Command "CR_COLTEMP" [CR] Details Get Color "?" [CR] 9.4.7 CR_WBAL-R Command Command "CR_WBAL-R" [CR] Details Get user controlled Red value of White Balance Acceptable "000_%1" [CR] Response %1 "000
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 62
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.4.12 CR_OFFSET-B Command Command "CR_OFFSET-B" [CR] Details Get user controlled Blue value of Offset Acceptable Response %1 "000_%1" [CR] "000" - "063" Unacceptable "?" [CR] 9.4.13 CR_SHARP Command Command "CR_SHARP" [CR]
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 63
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.4.17 CR_BCOLOR Command Command "CR_PROGV" [CR] Details Get BrilliantColor setting status Acceptable "000_%1" [CR] Response %1 Unacceptable "ON Set BrilliantColor to On "OFF Set BrilliantColor to
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 64
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.5 PC Status Read Commands 9.5.1 CR_FSYNC Command Command "CR_FSYNC" [CR] Details Get value of Fine Sync Acceptable Response %1 "000_%1" [CR] "0000" - "0031" "Error Code" [CR When
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 65
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.5.5 CR_CLAMP Command Command "CR_CLAMP" [CR] Details Get value of Clamp Acceptable "000_%1" [CR] Response %1 Unacceptable "0000" - " 4095" "Error Code" [CR When command is invalid in
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 66
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.5.8 CR_SETPCADJ Command Command "CR_SETPCADJ" [CR] Details Get PC signal for current system Acceptable "000_%1" [CR] When input signal is PC Analog; "VGA1 Indicates VGA1 is
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 67
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.5.9 CR_ORGMODE Command Command "CR_ORGMODE" [CR] Details Get the original signal of current selected Mode that is set in PC Adj. When MODE1- 10 or EXT11-
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 68
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.6 Video Status Read Command 9.6.1 CR_SERSYS Command Command "CR_SERSYS" [CR] Details Response Get currently selected signal. Value only when Input is video. (Invalid when Input is
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 69
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.7 Input Read Command 9.7.1 CR_INPUT Command Command "CR_INPUT" [CR] Details Get selected INPUT No. Acceptable Response %1 "000_%1" [CR] "1" - "4" Unacceptable "?" [CR] 9.7.2 CR_SOURCE Command Command "CR_SOURCE" [CR] Details
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 70
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.7.3 CR_SYSTEM Command Command "CR_SYSTEM" [CR] Details Get selected System Response Acceptable "000_%1" [CR] "VGA1 indicates VGA1 is selected "VGA2 indicates VGA2 is selected : "WXGA3 indicates
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 71
    PDG-DHT8000L Expand Serial Command Functional Specifications Input is Video or S-video "AUTO indicates Auto is selected "NTSC indicates NTSC is selected "NTSC443 indicates NTSC4.43 is selected "PAL indicates PAL is
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 72
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.7.5 CR_MODELIST Command Command "CR_MODELIST" [CR] Details Get possible modes for Mode list Acceptable "000_%1_%2_---_%x" [CR] Error Code "101" is returned except for PC-
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 73
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.7.9 CR_SRCINP4 Command Command "CR_SRCINP3" [CR] Details Get Source of New Video board Response %1 "HDCP-DVI2 New HDCP & DVI Card "DUAL-SDI HD&SD-SDI board "NOTERMINAL There is no board inserted Unacceptable "?" [CR] 9.7.12
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 74
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.7.14 CR_NMSLOT4 Command Command "CR_NMSLOT4" [CR] Details Get the board name inserted to Slot 4 Acceptable Response %1 "000_%1" [CR] The same data as CR_NMSLOT1 Unacceptable "?" [CR] 9.7.
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 75
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.7.18 CR_IDSLOT4 Command Command "CR_IDSLOT4" [CR] Details Get ID information on Slot 4. This command is to recognize the inserted slot board and specify the valid
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 76
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.8 Screen Status Read Commands 9.8.1 CR_SCREEN Command Command "CR_SCREEN" [CR] Details Get currently selected screen image size Acceptable "000_%1" [CR] "NORMAL Normal mode "ZOOM Zoom mode
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 77
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.8.6 CR_VPOS Command Command "CR_VPOS" [CR] Details Get setting status of V Position Acceptable "000_%1" [CR] Response %1 "-15" "015" Unacceptable "Error Code" [CR] 9.8.7 CR_HSCALE Command Command "CR_HSCALE" [
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 78
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.9 Lamp Status Read Commands 9.9.1 CR_LAMPREPL Command Command "CR_LAMPREPL" [CR] Details Get the information of Lamp Replacement time Acceptable "000_%1" [CR] "2**" 2 indicates 2 lamps are used in this model. indicates the
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 79
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.9.5 CR_INFLAMP Command Command "CR_INFLAMP" [CR] Details Get Lamp mode switching status Acceptable "000_%1" [CR] Response %1 "NML" --------- in Normal status (lamp switching operation is not active.) Unacceptable "?" [CR] 9.9.6
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 80
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.9.9 CR_LAMPCORRESPH Command Command "CR_LAMPCORRESPH" [CR] Details Get Lamp running time (in hours) *return lamp running time multiplied by a coefficient (not actual running time) Acceptable Response %1 "000_%1" [CR] "00000"-"
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 81
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10 Setting Status Read Commands 9.10.1 CR_LANG Command Command "CR_LANG" [CR] Details Get selected language Acceptable "000_%1" [CR] "ENG English is selected "DEU German is
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 82
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.5 CR_BACKGND Command Command "CR_BACKGND" [CR] Details Get setting status of Screen for no signal Acceptable "000_%1" [CR] "BLUE Blue Back is selected Response %1 "USER User is selected "BLACK Black Back is selected
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 83
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.10 CR_RSENS Command Command "CR_RSENS" [CR] Details Get selected location of infrared remote receiver of remote control Acceptable "000_%1" [CR] "ALL Front and back
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 84
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.15 CR_PJLOCKNOW Command Command "CR_PJLOCKNOW" [CR] "Error Code" [CR] 9.10.17 CR_FILH Command Command "CR_FILH" [CR] Details Get Filter used time Acceptable Response %1 "000_%1" [CR] "00000 - 99999" Unacceptable "Error Code"
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 85
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.20 CR_FILTIMER Command Command "CR_FILTIMER" [CR] Details Get time to display Filter cleaning / replacement warning on screen Acceptable "000_%1" [CR] "1000 Display massage by 1000h used. Response %1 "2000 Display massage by
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 86
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.24 CR_SHUTRCPROT Command Command "CR_SHUTRCPROT" [CR] Details Get status if Shutter can be controlled by R/C Acceptable "000_%1" [CR] Response %1 "ON Shutter is not controllable
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 87
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.29 CR_DELAYCTRL Command Command "CR_DELAYCTRL" "Manual, 30.00 Hz." is selected "50.00" --- "Manual, 50.00 Hz." is selected "59.94" --- "Manual, 59.94 Hz." is selected "60.00" --- "Manual, 60.00 Hz." is selected "BLANK"---"Manual,
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 88
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.33 CR_FRAMELOCKADJ Command Command "CR_FRAMELOCKADJ" [CR] Details Get manually set value of OFF Off is selected "USER1 User1 is selected Response %1 "USER2 User 2 is selected "USER3 User3 is selected "USER4 User4 is
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 89
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.36 CR_PIPMAININP Command Command "CR_PIPMAININP" [CR] Details Get Input and Source of "Picture in Picture". (Main picture) Acceptable "000_%1_%2" [CR] "1 Input1 is selected %1 "2
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 90
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.38 CR_PIPSIZE Command Command "CR_PIPSIZE" [CR] Details Get picture size of "Picture in Picture". (Sub picture) Acceptable "000_%1_%2" [CR] "1 10% is selected(Main
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 91
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.42 CR_EDGEBLENDING Command Command "CR_BLEND" [CR] Details Get all values of width of Edge blending Acceptable "000_%1_%2_%3_%4" [CR] Left width data
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 92
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.46 CR_CMMSXY_%1 Command Command "CR_CMMSXY_%1" [CR] Details Get "x","y" value of Measured of Color matching Acceptable "000_%2_%3" [CR] "RED value of Red is selected "
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 93
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.49 CR_CMTGG_%1 Command Command "CR_CMMTGG_%1" [CR] Details Get "g" value of Target of Color matching Acceptable "000_%2" [CR] "RED value of Red is selected "GREEN
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 94
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.53 CR_DYNAMICBLACK Command Command "CR_DYNAMICBLACK" [CR] Details Get setting status of DynamicBlack Acceptable "000_%1" [CR] "OFF Off is selected Response %1 "LOW Low is selected "
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 95
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.11 Other Status Read Commands 9.11.1 CR_STATUS Command Command "CR_STATUS" [CR] Details Get operating status of Projector after turned off due to lamp failure "81" Standby after Cooling Down due to lamp failure "2C" = Cooling Down
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 96
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.11.5 CR_P-TIMER Command Command "CR_P-TIMER" [CR] Details Command "CR_TEMPWARN" [CR] Details Get the information about the temperature inside the projector (close to the abnormal or in the abnormal status/in the safe temperature
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 97
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.11.7 CR_TEMPFAIL Command Command "CR_TEMPFAIL" [CR] Details Get the temperature inside the projector when the abnormal status occurs. It is possible to get the temperatures for more than one sensor all at once if it is applicable.
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 98
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.11.8 CR_TEMP Command Command "CR_TEMP"[CR] Details Get the current temperature information inside a projector happen for some projectors that the temperature continues to go up to abnormal status as long as lamp ballasts are hot.
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 99
    PDG-DHT8000L Expand Serial Command Functional Specifications 9.11.11 CR_OPTCTRLNO Command Command "CR_OPTCTRLNO"[CR] Details Get value of 12 CR_LENSTYPE Command Command "CR_LENSTYPE"[CR] Details Get which type of Lens is currently installed Acceptable "000_%1" [CR] Response %1 Unacceptable "?"
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 100
    PDG-DHT8000L Expand Serial Command Functional Specifications 10 Command with Address Specification 10.1. Overview - Commands with address are used to remote control more than one projector through RS-232C by a computer. - The command with address is defined as a single command per line that starts
  • Sanyo PDG-DHT8000L | RS232C Expand - Page 101
    PDG-DHT8000L Expand Serial Command Functional Specifications 10.2.2. When the command pipelining is needed 999") Command: string (Refer to Basic and Expand Serial Commands) 2) The only projectors that have the address matching with the one in the received data decode the command, and it returns
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
EXPAND SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PDG-DHT8000L
Ver.1.00
SANYO Electric Co., Ltd
DS Company
Projector Business Division