Sanyo PDG-DHT8000L RS232C Expand - Page 23
CF_COLMNSAV Command, 4.6 CF_COLMNLD Command, 4.7 CF_APCTRL Command, 4.8 CF_COLTEMP Command
View all Sanyo PDG-DHT8000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
PDG-DHT8000L Expand Serial Command Functional Specifications 8.4.5 CF_COLMNSAV Command Command "CF_COLMNSAV_%1" [CR] %1 "000 - 009 Specify the area to store Details Store current setting status of Color Management to the area specified in %1. (Available only in the normal Power ON status) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.4.6 CF_COLMNLD Command Command "CF_COLMNLD_%1" [CR] %1 "000 - 009 Specify the area to store Details Retrieve Color Management setting status from the area specified in %1. (Available only in the normal Power ON status) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.4.7 CF_APCTRL Command Command "CF_APCTRL_%1" [CR] "L1 Set Auto Picture Control to Level 1. "L2 Set Auto Picture Control to Level 2. %1 "OFF Set Auto Picture Control OFF. " UP Switch setting forward direction (OFF→L1→L2→OFF) " DN Switch setting backward direction (OFF→L2→L1→OFF) Details Set Auto Picture Control (Available only in the normal Power ON status) The value set by this command is not stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Suspend mode.) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.4.8 CF_COLTEMP Command Command "CF_COLTEMP_%1" [CR] %1 "000" - "003" Details Set Color Temperature (Available only in the normal Power ON status) The value set by this command is not stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Suspend mode.) Acceptable Response Unacceptable "000" [CR] "Error Code" [CR] 23/101