Sanyo PDG-DSU30 RS232 Basic - Page 14
POINTER UP Command, POINTER DOWN Command, 34 ENTER Command, FREEZE ON Command, FREEZE OFF Command,
UPC - 086483076596
View all Sanyo PDG-DSU30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
PDG-DSU30 Basic Serial Command Specifications 6.32 POINTER UP Command COMMAND "C3C" [CR] Detail Move up Pointer of OSD Menu. The behavior is the same as "▲" button of remote control. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.33 POINTER DOWN Command COMMAND "C3D" [CR] Detail Move down Pointer of OSD Menu. The behavior is the same as the "▼"key of the remote control. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.34 ENTER Command COMMAND "C3F" [CR] Detail Behave the same as the "ENTER" key of the remote control. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.35 FREEZE ON Command COMMAND "C43" [CR] Detail Freeze the projecting image. The behavior is the same as "FREEZE" button of the remote control except the command only freezes the image and does not cancel it. The projector shows the OSD "Freeze" at receiving the command. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.36 FREEZE OFF Command COMMAND "C44" [CR] Detail Cancel Freeze function The behavior is the same as "FREEZE" button of the remote control except the command only cancels the freeze and does not freezes the image. The projector shows the OSD "Freeze" at receiving command. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.37 AUTO ADJ. Command COMMAND "C89" [CR] Detail AUTO ADJ. Command The behavior is the same as the key "AUTO ADJ." button of the remote control. The projector does not show any OSD at receiving the command. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 14 / 17