Sanyo PDG-DWL100 RS232C Expand

Sanyo PDG-DWL100 - WXGA DLP Projector Manual

Get Sanyo PDG-DWL100 - WXGA DLP Projector PDF manuals and user guides
UPC - 086483074875
View all Sanyo PDG-DWL100 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PDG-DWL100 manual content summary:

  • Sanyo PDG-DWL100 | RS232C Expand - Page 1
    EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PDG-DWL100 Ver. 1.00 SANYO Electric Co., Ltd DS Company Projector Division
  • Sanyo PDG-DWL100 | RS232C Expand - Page 2
    PDG-DWL100 Expand Serial Command Functional Specifications CONTENTS 1 Overview ...6 2 Serial Interface Specification 6 2.1 Transfer Specification Read Command Table 11 6.6 Lamp Status Read Command Table 12 16 8.4.6 CF_COLTEMP Command 16 8.4.7 CF_IMAGE Command 16 8.4.8 CF_BCOLOR Command 16
  • Sanyo PDG-DWL100 | RS232C Expand - Page 3
    PDG-DWL100 Expand Serial Command Functional Specifications 8.4.10 CF_WHITEPEAKING Command 17 8.5 PC Control Command 18 8.5.1 CF_FSYNC Command 22 8.7.3 CF_MOUNTING Command 22 8.7.4 CF_DZCENT Command 22 8.8 Lamp Command 23 8.8.1 CF_LAMPH Command 23 8.8.2 CF_LAMPMODE Command 23 8.9 Sound
  • Sanyo PDG-DWL100 | RS232C Expand - Page 4
    PDG-DWL100 Expand Serial Command Functional Specifications 9 Status Read Command 28 9.1 Format ...28 9.2 Transfer Example 28 9.3 OSD...28 9.4 Image Status Commands 38 9.8.1 CR_SCREEN Command 38 9.8.2 CR_KYSTNMODE Command 38 9.8.3 CR_MOUNTING Command 38 9.9 Lamp Status Read Commands 39 4 / 47
  • Sanyo PDG-DWL100 | RS232C Expand - Page 5
    PDG-DWL100 Expand Serial Command Functional Specifications 9.9.1 CR_LAMPREPL Command 39 9.9.2 CR_LAMPH Command 39 9.9.3 CR_LAMPMODE Command 39 9.9.4 CR_LAMPSTS Command 39 9.9.5 CR_PROJH Command 40 9.9.6 CR_HMLAMP Command 40 9.10 SOUND status Read Commands 41 9.10.1
  • Sanyo PDG-DWL100 | RS232C Expand - Page 6
    PDG-DWL100 Expand Serial Command Functional Specifications 1 Overview This Functional Specification defines communication with Network board for PDG- DWL100. Commands are designed to Network communication, but most commands are also available to remote-control a projector through RS-232C from a
  • Sanyo PDG-DWL100 | RS232C Expand - Page 7
    PDG-DWL100 Expand Serial Command Functional Specifications 3 Notes for communication 3.1 Expand Serial Command is defined as a single command per line that starts with "C" and ends with carriage return (0x0D). 3.2 When a projector receives carriage return (0x0D), it starts decoding. 3.3 There
  • Sanyo PDG-DWL100 | RS232C Expand - Page 8
    PDG-DWL100 Expand Serial Command Functional Specifications 4 Notation 4.1 Data from a controller to a projector is represented as COMMAND, and responded data from a projector to a controller against the incoming command is represented as RESPONSE. 4.2 [CR]: Carriage Return Code The command ends with
  • Sanyo PDG-DWL100 | RS232C Expand - Page 9
    PDG-DWL100 Expand Serial Command Functional Specifications 5 Functional Execution Command Table 5.1. Ratio. Set Keystone Correction Select Mounting mode Cancel Digital zoom 5.5. Lamp Command Table Execute command CF_LAMPH_%1[CR] CF_LAMPMODE_%1[CR] Item Reset total lamp running time for each lamp
  • Sanyo PDG-DWL100 | RS232C Expand - Page 10
    PDG-DWL100 Expand Serial Command Functional Specifications 5.6. Sound Command Table Execute command CF_VOLUME_%1[CR] CF_MUTE_%1[CR] Item Set value of mode Set Standby mode. Set Closed caption. Set Fan control. Set Lamp life Reminder. Select Remote Control Reception Code Set Freeze on. 10 / 47
  • Sanyo PDG-DWL100 | RS232C Expand - Page 11
    PDG-DWL100 Expand Serial Command Functional Specifications 6 Status Read Command Table 6.1 Image Status Read Command Table Status read command CR_BRIGHT [CR] CR_CONT [CR] CR_COLOR [CR] CR_SHARP [CR] CR_GAMMA [CR] CR_COLTEMP [CR] CR_IMAGE [
  • Sanyo PDG-DWL100 | RS232C Expand - Page 12
    PDG-DWL100 Expand Serial Command Functional Specifications 6.6 Lamp Status Read Command Table Status read command Item CR_LAMPREPL[CR] Get information on Lamp replacement time CR_LAMPH [CR] Get total Actuality used time of lamps [CR] Get status of projector. CR_SIGNAL [CR] Get status
  • Sanyo PDG-DWL100 | RS232C Expand - Page 13
    PDG-DWL100 Expand Serial Command Functional Specifications 7 Error Code Table Error Code Contents -When the received data which cannot be decoded. ? -Parameter designation error (wrong digit number, including invalid value, etc.) 000
  • Sanyo PDG-DWL100 | RS232C Expand - Page 14
    PDG-DWL100 Expand Serial Command Functional Specifications 8 Functional Execution CommandFormat ①PC issues a command in the format below: Pattern1: "CF_Command (Status Read Commands are available in following status.) Projector Status Available Functional Execution Command In Standby Mode C00:
  • Sanyo PDG-DWL100 | RS232C Expand - Page 15
    PDG-DWL100 Expand Serial Command Functional Specifications 8.4 Image Command 8.4.1 CF_ BRIGHT Command Command "CF_BRIGHT_%1" [CR] "-50~050 Directly specify setting value of Brightness %1 "UP Increment setting value of Brightness by 1 "DN Decrement
  • Sanyo PDG-DWL100 | RS232C Expand - Page 16
    PDG-DWL100 Expand Serial Command Functional Specifications 8.4.5 CF_GAMMA Command Command "CF_GAMMA_%1" [CR] "000~003 Directly specify setting value of Gamma %1 "UP Increment setting value of Gamma by 1 "DN Decrement setting value of Gamma by 1 Details Set user when projector received
  • Sanyo PDG-DWL100 | RS232C Expand - Page 17
    PDG-DWL100 Expand Serial Command Functional Specifications 8.4.9 CF_TINT Command Command "CF_TINT_%1"[CR] "-50~050"------ Directly specify setting value of Tint. %1 "UP"---- Set Tint to UP "DN"---- Set Tint to DN Details Set user controlled value of Tint. (Available only in the normal Power
  • Sanyo PDG-DWL100 | RS232C Expand - Page 18
    PDG-DWL100 Expand Serial Command Functional Specifications 8.5 PC Control Command 8.5.1 CF_FSYNC Command Command "CF_FSYNC_ (Available only in the normal Power ON status) No display is shown when projector received command. Acceptable Correspondence Unacceptable "000" [CR] "Error Code" [CR]
  • Sanyo PDG-DWL100 | RS232C Expand - Page 19
    PDG-DWL100 Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command "CF_INPUT_%1" [CR] "HDMI command works the same way as "SOURCE" button of the projector and remote control. The projector shows Image OSD at receiving the command. Acceptable "000"
  • Sanyo PDG-DWL100 | RS232C Expand - Page 20
    PDG-DWL100 Expand Serial Command Functional Specifications 8.6.4 CF_INPUT2 Command Command "CF_INPUT2_%1" [CR] %1 "COMPUTER Select Computer1 Details Select Computer1 (Valid only when it is in the normal Power ON status.) The projector shows Image OSD at receiving the command. Acceptable "000
  • Sanyo PDG-DWL100 | RS232C Expand - Page 21
    PDG-DWL100 Expand Serial Command Functional Specifications 8.6.9 CF_INPUT7 Command Command "CF_INPUT7_%1" [CR] %1 "VIDEO Select Video Details Select Video (Valid only when it is in the normal Power ON status.) The projector shows Image OSD at receiving the command. Acceptable "000" [CR]
  • Sanyo PDG-DWL100 | RS232C Expand - Page 22
    PDG-DWL100 Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.1 CF_SCREEN Command Command "CF_SCREEN_%1" [CR] "NORMAL Select 4:3 screen display "WIDE Select 16 When the value reaches the correction limit, the projector accepts the command but does not execute it.
  • Sanyo PDG-DWL100 | RS232C Expand - Page 23
    PDG-DWL100 Expand Serial Command Functional Specifications 8.8 Lamp Command 8.8.1 CF_LAMPH Command Command "CF_LAMPH_%1"[CR] %1 "RST" Details Reset total lamp running time This command is available in normal Power ON status. Acceptable Acceptable Correspondence Unacceptable Unacceptable
  • Sanyo PDG-DWL100 | RS232C Expand - Page 24
    PDG-DWL100 Expand Serial Command Functional Specifications 8.9 Sound Command 8.9.1 CF_VOLUME Command Command "CF_VOLUME_%1" effective after the power is turned to ALL OFF status. Display OSD when projector received command. Acceptable "000" [CR] Correspondence Unacceptable "Error Code" [CR
  • Sanyo PDG-DWL100 | RS232C Expand - Page 25
    PDG-DWL100 Expand Serial Command Functional Specifications 8.10 Setting Command 8.10.1 CF_INPUTSEARCH Command Command " after the power is turned to ALL OFF status. No display is shown when projector received command.. Acceptable "000" [CR] Correspondence Unacceptable "Error Code" [CR]
  • Sanyo PDG-DWL100 | RS232C Expand - Page 26
    PDG-DWL100 Expand Serial Command Functional Specifications 8.10.4 CF_FDEFAULT Command Command "CF_FDEFAULT_%1" [CR] %1 "RST" Details Return the settings to Factory Default status (Valid only when in the normal Power ON status) No display is shown when projector received command.. Acceptable "
  • Sanyo PDG-DWL100 | RS232C Expand - Page 27
    PDG-DWL100 Expand Serial Command Functional Specifications CR] %1 "ON Set On "OF Set Off Details Select Lamp life Reminder. (Valid only when in the normal Power ON turned to ALL OFF status. No display is shown when projector received command.. Acceptable "000" [CR] Correspondence Unacceptable
  • Sanyo PDG-DWL100 | RS232C Expand - Page 28
    PDG-DWL100 Expand Serial Command Functional Specifications 9 Status Read Command 9.1 Format 1) PC issues a command in the format below: "CR_Command" [CR] Command: String 2) When the projector receives the applicable command, it returns the required information as a data string. "000_" %1 [CR] %1:
  • Sanyo PDG-DWL100 | RS232C Expand - Page 29
    PDG-DWL100 Expand Serial Command Functional Specifications 9.4 Image Status Read Commands 9.4.1 CR_BRIGHT Command Command "CR_BRIGHT" [CR] Details Get user "CR_COLOR" [CR] Details Get user controlled value of Color Acceptable "000_%1" [CR] Correspondence %1 "-16" - "016" Unacceptable "?"
  • Sanyo PDG-DWL100 | RS232C Expand - Page 30
    PDG-DWL100 Expand Serial Command Functional Specifications 9.4.6 CR_COLTEMP Command Command "CR_COLTEMP" [CR] Details Get Color Temp setting status to focus on tone reproduction for sRGB) "USER" ------ USER (Fixed value to focus on tone reproduction for USER) "Error Code" [CR When command is
  • Sanyo PDG-DWL100 | RS232C Expand - Page 31
    PDG-DWL100 Expand Serial Command Functional Specifications 9.4.10 CR_WHITEPEAKING Command Command "CR_WHITEPEAKING" [CR] Details Get user controlled value of White peaking Acceptable "000_%1" [CR] Correspondence %1 "000" - "010" Unacceptable "?" [CR] 31 / 47
  • Sanyo PDG-DWL100 | RS232C Expand - Page 32
    PDG-DWL100 Expand Serial Command Functional Specifications 9.5 PC Status Read Commands 9.5.1 CR_FSYNC Command Command "CR_FSYNC" [CR] Details Get value of Fine Sync Acceptable Correspondence %1 "000_%1" [CR] "0000-0031" ------ Directly specify setting value
  • Sanyo PDG-DWL100 | RS232C Expand - Page 33
    PDG-DWL100 Expand Serial Command Functional Specifications 9.5.5 CR_SETPCADJ Command Command "CR_SETPCADJ" [CR] Details Get value of Signal name. Acceptable "000_%1" [CR] This command is available only Input is PC-Analog. Get value
  • Sanyo PDG-DWL100 | RS232C Expand - Page 34
    PDG-DWL100 Expand Serial Command Functional Specifications 9.6 Video Status Read Command 9.6.1 CR_SERSYS Command Command "CR_SERSYS" [CR] Details Get currently selected signal. Valid only when input is video. (Invalid when Slot is computer)
  • Sanyo PDG-DWL100 | RS232C Expand - Page 35
    PDG-DWL100 Expand Serial Command Functional Specifications 9.7 CR_INPUT Command 9.7.1 CR_INPUT Command Command "CR_INPUT" [CR] Details Get Setting of Input number. Acceptable "000_%1" [CR] "1 HDMI is selected "2 Computer 1 is selected "3 YPbPr 1 is selected
  • Sanyo PDG-DWL100 | RS232C Expand - Page 36
    PDG-DWL100 Expand Serial Command Functional Specifications 9.7.3 CR_SYSTEM Command Command "CR_SYSTEM" [CR] Details Get selected System Acceptable "000_%1" [CR] Slot is PC signal "VGA1 VGA1 is selected "VGA2 VGA2 is selected : : "XGA1
  • Sanyo PDG-DWL100 | RS232C Expand - Page 37
    PDG-DWL100 Expand Serial Command Functional Specifications 9.7.6 CR_SRCINP3 Command Command "CR_SRCINP3" [CR] Details Get Source of Input 3 Acceptable "000_%1" [CR] Correspondence %1 "YPBPR1 Source is YPbPr1 Unacceptable "?" [CR] 9.7.7 CR_SRCINP4 Command Command "CR_SRCINP4" [CR]
  • Sanyo PDG-DWL100 | RS232C Expand - Page 38
    PDG-DWL100 Expand Serial Command Functional Specifications 9.8 Screen Status Read Commands 9.8.1 CR_SCREEN Command Command "CR_SCREEN" [CR] Details Get currently selected screen image size Acceptable "000_%1" [CR] Correspondence %1 Unacceptable "NORMAL 4:3 screen is selected "WIDE 16 10
  • Sanyo PDG-DWL100 | RS232C Expand - Page 39
    PDG-DWL100 Expand Serial Command Functional Specifications 9.9 Lamp Status Read Commands 9.9.1 CR_LAMPREPL Command Command "CR_LAMPREPL"[CR] Details Get information of Lamp Replacement time Acceptable "000_%1"[CR] "1Y Over lamp replacement time "1N Within lamp replacement time Response %1 "1"
  • Sanyo PDG-DWL100 | RS232C Expand - Page 40
    PDG-DWL100 Expand Serial Command Functional Specifications 9.9.5 CR_PROJH Command Command "CR_PROJH" [CR] Details Get total running time of projector (in hours) Acceptable "000_%1" [CR] Correspondence %1 "0000000" - "0099999" Unacceptable "?" [CR] 9.9.6 CR_HMLAMP Command Command "
  • Sanyo PDG-DWL100 | RS232C Expand - Page 41
    PDG-DWL100 Expand Serial Command Functional Specifications 9.10 SOUND status Read Commands 9.10.1 CR_VOLUME Command Command "CR_VOLUME" [CR] Details Get value of volume setting Acceptable "000_%1" [CR] Correspondence %1 "000" - "010" Unacceptable "?" [CR] 9.
  • Sanyo PDG-DWL100 | RS232C Expand - Page 42
    PDG-DWL100 Expand Serial Command Functional Specifications 9.11 Setting Status Read Commands 9.11.1 CR_INPUTSEARCH Command Command "CR_INPUTSEARCH" [CR] Details Get Input search setting status Acceptable "000_%1" [CR] Correspondence %1 "ON Input search is
  • Sanyo PDG-DWL100 | RS232C Expand - Page 43
    PDG-DWL100 Expand Serial Command Functional Specifications 9.11.5 CR_PJLOCKNOW Command Command "CR_PJLOCKNOW" [CR] Details Get setting status of current PJ Lock status Acceptable "000_%1" [CR] "LOCK Projector is locked and the password is needed to release the lock Correspondence %1 "FREE
  • Sanyo PDG-DWL100 | RS232C Expand - Page 44
    PDG-DWL100 Expand Serial Command Functional Specifications 9.11.10 CR_FANCONTROL Command Command "CR_FANCONTROL" [CR] 9.11.11 CR_LAMPLIFERE Command Command "CR_LAMPLIFERE" [CR] Details Get setting status of Lamp life Reminder. Acceptable "000_%1" [CR] Correspondence %1 "ON On is selected.
  • Sanyo PDG-DWL100 | RS232C Expand - Page 45
    PDG-DWL100 Expand Serial Command Functional Specifications 9.12 Other Status Read Commands 9.12.1 CR_STATUS Command Command "CR_STATUS" [CR] Details Get status of Projector. This command is the same as "CR0" of Basic command, but it returns an error code. Acceptable "000_%1" [CR] "00" = Power
  • Sanyo PDG-DWL100 | RS232C Expand - Page 46
    PDG-DWL100 Expand Serial Command Functional Specifications 9.12.5 CR_TEMPWARN Command Command "CR_TEMPWARN" [CR] Details Get the information about the temperature inside the projector "-05.5F". With more than one temperature sensors installed, projector returns the data of each sensor in order.
  • Sanyo PDG-DWL100 | RS232C Expand - Page 47
    PDG-DWL100 Expand Serial Command Functional Specifications 9.12.7 CR_TEMP Command Command "CR_TEMP" [CR] Details Get the information about the temperature inside the projector "_00.0E". Some of the projectors get abnormal temperature because of heat of Lamp ballast in Standby mode or Powering
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
EXPAND SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PDG-DWL100
Ver. 1.00
SANYO Electric Co., Ltd
DS Company
Projector Division