Sanyo PDG-DWL2500 Owners Manual Network set up - Page 41

Setting up the projector Setting 2 Item Description Terminal Sets the COMPUTER IN 2/MONITOR OUT terminal. (Computer2, Monitor out) Power management......Sets into the selected power management mode (Ready, Shutdown, OFF) if the input signal is interrupted and no control key is pressed for the specified period of time. *The specified time can be set 1 to 30 min. Direct on Sets the power-on mode when the AC cord is connected to the outlet. (ON. OFF) Lamp control......Selects lamp control mode. (Normal, Eco) Key lock Sets the prohibition of controls either Projector or Remote control. (OFF, Projector keys, Remote control) Fan control Sets the fan control speed. OFF Normal mode ON1 Highland mode 1 ON2 Highland mode 2 Lamp Corres. Value(h Displays the lamp use time (Corresponding value) . Reset the time after lamp replacement. Click "Reset", a confirmation display appears, and then click "OK", the time will be reset. Setting 3 Item Description Filter counter......Displays the filter counter. Reset the time after filter replacement. Click "Reset", a confirmation display appears, and then click "OK", the time will be reset. Filter warning.....Sets the time to indicate the filter warning message on the screen. (OFF, 2000H, 3000H, 4000H) Factory default....Sets all of the projector control items to the factory default setting except the following items. User Logo, Log PIN code lock, PIN code lock, Lamp Corres. Value, Filter counter, PJ time * This function is effective for all the Network settings. No show Sets the black out image temporarily. (ON, OFF) Freeze Sets the image to freeze mode. (ON, OFF) Closed caption..Sets the closed caption function. Closed caption...Sets the closed caption mode. (OFF, CC1, CC2, CC3, CC4) Color Sets the color of the contents. (Color, White) ENGLISH 41