Sanyo PDG-DXL100 RS232C Expand

Sanyo PDG-DXL100 - XGA DLP Projector Manual

Get Sanyo PDG-DXL100 - XGA DLP Projector PDF manuals and user guides
UPC - 086483074868
View all Sanyo PDG-DXL100 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PDG-DXL100 manual content summary:

  • Sanyo PDG-DXL100 | RS232C Expand - Page 1
    EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PDG-DXL100 Ver. 1.01 SANYO Electric Co., Ltd DS Company Projector Division
  • Sanyo PDG-DXL100 | RS232C Expand - Page 2
    PDG-DXT100 Expand Serial Command Functional Specifications CONTENTS 1 Overview ...6 2 Serial Interface Specification 6 2.1 Transfer Specification 6 Status Read Command Table 11 6.5 Screen Status Read Command Table 11 6.6 Lamp Status Read Command Table 12 6.7 Sound Status Read Command Table 12
  • Sanyo PDG-DXL100 | RS232C Expand - Page 3
    PDG-DXT100 Expand Serial Command Functional Specifications 8.4.10 CF_WHITEPEAKING Command 17 8.5 PC Control Command 18 8.5.1 CF_FSYNC Command 22 8.7.3 CF_MOUNTING Command 22 8.7.4 CF_DZCENT Command 22 8.8 Lamp Command 23 8.8.1 CF_LAMPH Command 23 8.8.2 CF_LAMPMODE Command 23 8.9 Sound
  • Sanyo PDG-DXL100 | RS232C Expand - Page 4
    PDG-DXT100 Expand Serial Command Functional Specifications 9 Status Read Command 28 9.1 Format ...28 9.2 Transfer Example 28 9.3 OSD...28 9.4 Image Status Commands 38 9.8.1 CR_SCREEN Command 38 9.8.2 CR_KYSTNMODE Command 38 9.8.3 CR_MOUNTING Command 38 9.9 Lamp Status Read Commands 39 4 / 47
  • Sanyo PDG-DXL100 | RS232C Expand - Page 5
    PDG-DXT100 Expand Serial Command Functional Specifications 9.9.1 CR_LAMPREPL Command 39 9.9.2 CR_LAMPH Command 39 9.9.3 CR_LAMPMODE Command 39 9.9.4 CR_LAMPSTS Command 39 9.9.5 CR_PROJH Command 40 9.9.6 CR_HMLAMP Command 40 9.10 SOUND status Read Commands 41 9.10.1
  • Sanyo PDG-DXL100 | RS232C Expand - Page 6
    PDG-DXL100 Expand Serial Command Functional Specifications 1 Overview This Functional Specification defines communication with Network board for PDG- DXL100. Commands are designed to Network communication, but most commands are also available to remote-control a projector through RS-232C from a
  • Sanyo PDG-DXL100 | RS232C Expand - Page 7
    PDG-DXL100 Expand Serial Command Functional Specifications 3 Notes for communication 3.1 Expand Serial Command is defined as a single command per line that starts with "C" and ends with carriage return (0x0D). 3.2 When a projector receives carriage return (0x0D), it starts decoding. 3.3 There
  • Sanyo PDG-DXL100 | RS232C Expand - Page 8
    PDG-DXL100 Expand Serial Command Functional Specifications 4 Notation 4.1 Data from a controller to a projector is represented as COMMAND, and responded data from a projector to a controller against the incoming command is represented as RESPONSE. 4.2 [CR]: Carriage Return Code The command ends with
  • Sanyo PDG-DXL100 | RS232C Expand - Page 9
    PDG-DXL100 Expand Serial Command Functional Specifications 5 Functional Execution Command Table 5.1. Ratio. Set Keystone Correction Select Mounting mode Cancel Digital zoom 5.5. Lamp Command Table Execute command CF_LAMPH_%1[CR] CF_LAMPMODE_%1[CR] Item Reset total lamp running time for each lamp
  • Sanyo PDG-DXL100 | RS232C Expand - Page 10
    PDG-DXL100 Expand Serial Command Functional Specifications 5.6. Sound Command Table Execute command CF_VOLUME_%1[CR] CF_MUTE_%1[CR] Item Set value of mode Set Standby mode. Set Closed caption. Set Fan control. Set Lamp life Reminder. Select Remote Control Reception Code Set Freeze on. 10 / 47
  • Sanyo PDG-DXL100 | RS232C Expand - Page 11
    PDG-DXL100 Expand Serial Command Functional Specifications 6 Status Read Command Table 6.1 Image Status Read Command Table [CR] CR_TINT [CR] CR_WHITEPEAKING [CR] Item Get value of Brightness Get value of Contrast Get value of Color Get value of Sharpness Get value of Gamma Get value of Color
  • Sanyo PDG-DXL100 | RS232C Expand - Page 12
    PDG-DXL100 Expand Serial Command Functional Specifications 6.6 Lamp Status Read Command Table Status read command Item CR_LAMPREPL[CR] Get information on Lamp replacement time CR_LAMPH [CR] Get total Actuality used time of lamps CR_LAMPMODE [CR] Get setting status of dimmer function level.
  • Sanyo PDG-DXL100 | RS232C Expand - Page 13
    PDG-DXL100 Expand Serial Command Functional Specifications 7 Error Code Table Error Code Contents -When the received data which cannot be decoded. ? -Parameter designation error (wrong digit number, including invalid value, etc.) 000
  • Sanyo PDG-DXL100 | RS232C Expand - Page 14
    PDG-DXL100 Expand Serial Command Functional Specifications 8 Functional Execution CommandFormat ①PC issues a command in the format below: Pattern1: "CF_Command (Status Read Commands are available in following status.) Projector Status Available Functional Execution Command In Standby Mode C00:
  • Sanyo PDG-DXL100 | RS232C Expand - Page 15
    PDG-DXL100 Expand Serial Command Functional Specifications 8.4 Contrast %1 "UP Increment setting value of Contrast by 1 "DN Decrement setting value of Contrast by 1 Details Set user controlled value of Contrast. (Available only in the normal Power ON status) No display is shown when projector
  • Sanyo PDG-DXL100 | RS232C Expand - Page 16
    PDG-DXL100 Expand Serial Command Functional Specifications 8.4.5 CF_GAMMA Command Command "CF_GAMMA_%1" [CR] "000~003 Select Image mode. (Available only in the normal Power ON status) The projector shows Image OSD at receiving the command. Acceptable Correspondence Unacceptable "000" [CR
  • Sanyo PDG-DXL100 | RS232C Expand - Page 17
    PDG-DXL100 Expand Serial Command Functional Specifications 8.4.9 CF_TINT Command Command "CF_TINT_%1"[CR] "-50~050"------ Directly Available only in the normal Power ON status) No display is shown when projector received command. Acceptable "000" [CR] Correspondence Unacceptable "Error Code"
  • Sanyo PDG-DXL100 | RS232C Expand - Page 18
    PDG-DXL100 Expand Serial Command Functional Specifications 8.5 PC Control Command 8.5.1 CF_FSYNC Command Command "CF_FSYNC_ (Available only in the normal Power ON status) No display is shown when projector received command. Acceptable Correspondence Unacceptable "000" [CR] "Error Code" [CR]
  • Sanyo PDG-DXL100 | RS232C Expand - Page 19
    PDG-DXL100 Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command "CF_INPUT_%1" [CR] "HDMI command works the same way as "SOURCE" button of the projector and remote control. The projector shows Image OSD at receiving the command. Acceptable "000"
  • Sanyo PDG-DXL100 | RS232C Expand - Page 20
    PDG-DXL100 Expand Serial Command Functional Specifications 8.6.4 CF_INPUT2 Command Command "CF_INPUT2_%1" [CR] %1 "COMPUTER Select Computer1 Details Select Computer1 (Valid only when it is in the normal Power ON status.) The projector shows Image OSD at receiving the command. Acceptable "000
  • Sanyo PDG-DXL100 | RS232C Expand - Page 21
    PDG-DXL100 Expand Serial Command Functional Specifications 8.6.9 CF_INPUT7 Command Command "CF_INPUT7_%1" [CR] %1 "VIDEO Select Video Details Select Video (Valid only when it is in the normal Power ON status.) The projector shows Image OSD at receiving the command. Acceptable "000" [CR]
  • Sanyo PDG-DXL100 | RS232C Expand - Page 22
    PDG-DXL100 Expand Serial Command Functional Specifications 8.7 projector accepts the command but does not execute it. The behavior is the same as the "Keystone +/-" button of the remote [CR] %1 "CENT Cancel Digital Zoom CENT "CENTER Details Cancel Digital Zoom When image is expanded or shrunk,
  • Sanyo PDG-DXL100 | RS232C Expand - Page 23
    PDG-DXL100 Expand Serial Command Functional Specifications 8.8 Lamp Command 8.8.1 CF_LAMPH Command Command "CF_LAMPH_%1"[CR] %1 "RST" Details Reset total lamp running time This command is available in normal Power ON status. Acceptable Acceptable Correspondence Unacceptable Unacceptable
  • Sanyo PDG-DXL100 | RS232C Expand - Page 24
    PDG-DXL100 Expand Serial Command Functional Specifications remote control, which adjusts volume directly and release the sound-mute function. The status set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. Display OSD when projector
  • Sanyo PDG-DXL100 | RS232C Expand - Page 25
    PDG-DXL100 Expand Serial Command Functional Specifications 8.10 Setting Command 8.10.1 CF_INPUTSEARCH Command Command " after the power is turned to ALL OFF status. No display is shown when projector received command.. Acceptable "000" [CR] Correspondence Unacceptable "Error Code" [CR]
  • Sanyo PDG-DXL100 | RS232C Expand - Page 26
    PDG-DXL100 Expand Serial Command Functional Specifications 8.10.4 CF_FDEFAULT Command Command "CF_FDEFAULT_%1" [CR] %1 "RST" Details Return the settings to Factory Default status (Valid only when in the normal Power ON status) No display is shown when projector received command.. Acceptable "
  • Sanyo PDG-DXL100 | RS232C Expand - Page 27
    PDG-DXL100 Expand Serial Command Functional Specifications Off Details Select Lamp life Reminder. ( shown when projector received command.. Remote Control forward (Code1 → Code2 → Code1) "DN Switch Code setting of Remote Control backward (Code1 → Code2 → Code1) Details Select Code of Remote
  • Sanyo PDG-DXL100 | RS232C Expand - Page 28
    PDG-DXL100 Expand Serial Command Functional Specifications 9 Status Read Command 9.1 Format 1) PC issues a command in the format below: "CR_Command" [CR] Command: String 2) When the projector receives the applicable command, it returns the required information as a data string. "000_" %1 [CR] %1:
  • Sanyo PDG-DXL100 | RS232C Expand - Page 29
    PDG-DXL100 Expand Serial Command Functional Specifications 9.4 Image Status Read Commands 9.4.1 CR_BRIGHT Command Command "CR_BRIGHT" [CR] CR_CONT Command Command "CR_CONT" [CR] Details Get user controlled value of Contrast Acceptable "000_%1" [CR] Correspondence %1 "-50" - "050"
  • Sanyo PDG-DXL100 | RS232C Expand - Page 30
    PDG-DXL100 Expand Serial Command Functional Specifications 9.4.6 CR_COLTEMP Command Command "CR_COLTEMP" [CR] Details Get Color Temp setting status Acceptable "000_%1" [CR] "000": Correspondence %1 "001": "002": Unacceptable "?" [CR] 9.4.7 CR_IMAGE Command Command "CR_IMAGE" [CR]
  • Sanyo PDG-DXL100 | RS232C Expand - Page 31
    PDG-DXL100 Expand Serial Command Functional Specifications 9.4.10 CR_WHITEPEAKING Command Command "CR_WHITEPEAKING" [CR] Details Get user controlled value of White peaking Acceptable "000_%1" [CR] Correspondence %1 "000" - "010" Unacceptable "?" [CR] 31 / 47
  • Sanyo PDG-DXL100 | RS232C Expand - Page 32
    PDG-DXL100 Expand Serial Command Functional Specifications 9.5 PC Status Read Commands 9.5.1 CR_FSYNC Command Command "CR_FSYNC" [CR] Details Get value of Fine Sync Acceptable Correspondence %1 "000_%1" [CR] "0000-0031" ------ Directly specify setting value
  • Sanyo PDG-DXL100 | RS232C Expand - Page 33
    PDG-DXL100 Expand Serial Command Functional Specifications 9.5.5 CR_SETPCADJ Command Command "CR_SETPCADJ" [CR] Details Get value of Signal name. Acceptable "000_%1" [CR] This command is available only Input is PC-Analog. Get value
  • Sanyo PDG-DXL100 | RS232C Expand - Page 34
    PDG-DXL100 Expand Serial Command Functional Specifications 9.6 Video Status Read Command 9.6.1 CR_SERSYS Command Command "CR_SERSYS" [CR] Details Get currently selected signal. Valid only when input is video. (Invalid when Slot is computer)
  • Sanyo PDG-DXL100 | RS232C Expand - Page 35
    PDG-DXL100 Expand Serial Command Functional Specifications 9.7 CR_INPUT Command 9.7.1 CR_INPUT Command Command "CR_INPUT" [CR] Details Get Setting of Input number. Acceptable "000_%1" [CR] "1 HDMI is selected "2 Computer 1 is selected "3 YPbPr 1 is selected
  • Sanyo PDG-DXL100 | RS232C Expand - Page 36
    PDG-DXL100 Expand Serial Command Functional Specifications 9.7.3 CR_SYSTEM Command Command "CR_SYSTEM" [CR] Details Get selected System Acceptable "000_%1" [CR] Slot is PC signal "VGA1 VGA1 is selected "VGA2 VGA2 is selected : : "XGA1
  • Sanyo PDG-DXL100 | RS232C Expand - Page 37
    PDG-DXL100 Expand Serial Command Functional Specifications 9.7.6 CR_SRCINP3 Command Command "CR_SRCINP3" [CR] Details Get Source of Input 3 Acceptable "000_%1" [CR] Correspondence %1 "YPBPR1 Source is YPbPr1 Unacceptable "?" [CR] 9.7.7 CR_SRCINP4 Command Command "CR_SRCINP4" [CR]
  • Sanyo PDG-DXL100 | RS232C Expand - Page 38
    PDG-DXL100 Expand Serial Command Functional Specifications 9.8 Screen Status Read Commands 9.8.1 CR_SCREEN Command Command "CR_SCREEN" [CR] Details Get currently selected screen image size Acceptable "000_%1" [CR] Correspondence %1 Unacceptable "NORMAL 4:3 screen is selected "
  • Sanyo PDG-DXL100 | RS232C Expand - Page 39
    PDG-DXL100 Expand Serial Command Functional Specifications 9.9 Lamp Status Read Commands 9.9.1 CR_LAMPREPL Command Command "CR_LAMPREPL"[CR] Details Get information of Lamp Replacement time Acceptable "000_%1"[CR] "1Y Over lamp replacement time "1N Within lamp replacement time Response %1 "1"
  • Sanyo PDG-DXL100 | RS232C Expand - Page 40
    PDG-DXL100 Expand Serial Command Functional Specifications 9.9.5 CR_PROJH Command Command "CR_PROJH" [CR] Details Get total running time of projector (in hours) Acceptable "000_%1" [CR] Correspondence %1 "0000000" - "0099999" Unacceptable "?" [CR] 9.9.6 CR_HMLAMP Command Command "
  • Sanyo PDG-DXL100 | RS232C Expand - Page 41
    PDG-DXL100 Expand Serial Command Functional Specifications 9.10 SOUND status Read Commands 9.10.1 CR_VOLUME Command Command "CR_VOLUME" [CR] Details Get value of volume setting Acceptable "000_%1" [CR] Correspondence %1 "000" - "010" Unacceptable "?" [CR] 9.
  • Sanyo PDG-DXL100 | RS232C Expand - Page 42
    PDG-DXL100 Expand Serial Command Functional Specifications 9.11 Setting Status Read Commands 9.11.1 CR_INPUTSEARCH Command Command "CR_INPUTSEARCH" [CR] Details Get Input search setting status Acceptable "000_%1" [CR] Correspondence %1 "ON Input search is
  • Sanyo PDG-DXL100 | RS232C Expand - Page 43
    PDG-DXL100 Expand Serial Command Functional Specifications 9.11.5 CR_PJLOCKNOW Command Command "CR_PJLOCKNOW" [CR] Details Get setting status of current PJ Lock status Acceptable "000_%1" [CR] "LOCK Projector is locked and the password is needed to release the lock Correspondence %1 "FREE
  • Sanyo PDG-DXL100 | RS232C Expand - Page 44
    PDG-DXL100 Expand Serial Command Functional Specifications "CR_LAMPLIFERE" [CR] Details Get setting status of Lamp life Reminder. Acceptable "000_%1" [CR] Correspondence Command Command "CR_RCODE" [CR] Details Get selected Remote Control Code Acceptable "000_%1" [CR] Correspondence %1
  • Sanyo PDG-DXL100 | RS232C Expand - Page 45
    PDG-DXL100 Expand Serial Command Functional Specifications 9.12 Other Status Read Commands 9.12.1 CR_STATUS Command Command "CR_STATUS" [CR] Details Get status of Projector. This command is the same as "CR0" of Basic command, but it returns an error code. Acceptable "000_%1" [CR] "00" = Power
  • Sanyo PDG-DXL100 | RS232C Expand - Page 46
    PDG-DXL100 Expand Serial Command Functional Specifications 9.12.5 CR_TEMPWARN Command Command "CR_TEMPWARN" [CR] Details Get the information about the temperature inside the projector (1) close to an abnormal status 2) in an abnormal status 3) temperature level is normal 4)abnormal status is not
  • Sanyo PDG-DXL100 | RS232C Expand - Page 47
    PDG-DXL100 Expand Serial Command Functional Specifications 9.12.7 CR_TEMP Command Command "CR_TEMP" [CR] Details Get the information about the temperature inside the projector "_00.0E". Some of the projectors get abnormal temperature because of heat of Lamp ballast in Standby mode or Powering
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
EXPAND SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PDG-DXL100
Ver. 1.01
SANYO Electric Co., Ltd
DS Company
Projector Division