Sanyo PDG-DXL2000 RS232C Expand

Sanyo PDG-DXL2000 - 2000 Lumens Manual

Get Sanyo PDG-DXL2000 - 2000 Lumens PDF manuals and user guides
UPC - 086483079436
View all Sanyo PDG-DXL2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PDG-DXL2000 manual content summary:

  • Sanyo PDG-DXL2000 | RS232C Expand - Page 1
    EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PDG-DXL2000 Ver. 1.00 SANYO Electric Co., Ltd DS Company Projector Division
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 2
    PDG-DXL2000 Expand Serial Command Functional Specifications - CONTENTS - 1. Overview ...7 2. Serial Interface Specification 7 2.1 Transfer Status Read Command Table 12 6.5 Screen Status Read Command Table 13 6.6 Lamp Status Read Command Table 13 6.7 Sound Status Read Command Table 13 6.8
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 3
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.4.9 CF_PROGV Command 19 8.4.10 CF_NZRED Command 19 8.7.9 CF_CEIL Command 30 8.7.10 CF_REAR Command 30 8.7.11 CF_COLBOARD Command 31 8.8 Lamp Command ...32 8.8.1 CF_LAMPH Command 32 8.8.2 CF_LAMPMODE Command 32 8.9 Sound Command 33
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 4
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10 Setting Command 34 8.10.1 CF_LANG Command 34 8.10.2 CF_MENUPOSITION Command 34 8.10.3 CF_AUTOSETUPPCADJ Command 35 8.10.4 CF_INPUTSEARCH Command 35 8.
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 5
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.2 Transfer Example 46 9.3 Operation Condition 46 9.4 Image Status Read Command 47 9.4.1 CR_BRIGHT Command 47 9.4.2 CR_CONT Command 47 9.4.3 CR_COLOR Command 47 9.4.4
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 6
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.8.3 CR_VSCALE Command 57 9.8.4 CR_VPOS Command 57 9.8.5 CR_HSCALE Command 58 9.8.6 CR_HPOS Command 58 9.8.7 CR_ CEIL Command 58 9.8.8 CR_ REAR Command 58 9.8.9 CR_ COLBOARD Command 58 9.9 Lamp Status Read Command 59 9.9.1
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 7
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.11.22 CR_SECURITY Command 66 9.11.23 CR_KEYDIS Command 66 9.11.24 CR_PJLOCKNOW Command 67 9.11.25 CR_PJLOCKMENU Command 67 9.
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 8
    for PDG-DXL2000. 1.2 Compatible to Firmware Ver. 1.x of the projector. 1.3 Most commands can be used to control projector remotely be changed in service mode. 2.2 Connection Dedicated serial cable must be used for a connection to a computer and a projector. PC COM 1 Projector Control Port (D-Sub
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 9
    PDG-DXL2000 Expand Serial Command Functional Specifications 3. Notes for communication 1. Expand not executed. When it takes more than one second to receive carriage return (0X0D) after the projector receives the first data "C", it clears the information of buffer. 4. On command pipelining, wait
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 10
    PDG-DXL2000 Expand Serial Command Functional Specifications 5. Functional Execution Command Table 5.1 Image Command Table Execute command CF_BRIGHT_%1[CR] CF_CONT_%1[CR] CF_COLOR_%1[CR] CF_TINT_%1[CR] CF_SHARP_%1[CR] CF_GAMMA_%1[
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 11
    PDG-DXL2000 Expand Serial Command 5.5 Lamp Command Table Execute command CF_LAMPH_%1[CR] CF_LAMPMODE_%1[CR] Item Reset Lamp use time Select Lamp mode Set color of Closed caption Select Remote Control Reception Code Disable RC/Projector keys (Only available to models with top panel button) Input
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 12
    PDG-DXL2000 Expand Serial Command Functional Specifications CF_FDEFAULT_%1[CR] Set the value to Factory CF_FREEZE _%1[CR] CF_VMUTE _%1[CR] CF_PTIMER_%1[CR] Item Behave the same as corresponding key of the projector / remote control. Switch ON/OFF of each Menu. Switch ON/OFF of Power. Set Freeze
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 13
    PDG-DXL2000 Expand Serial Command Functional Specifications 6. Status Read Command Table 6.1 Image Status Read Command Table Status read command CR_BRIGHT[CR] CR_CONT[CR] CR_COLOR[CR] CR_TINT[CR]
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 14
    PDG-DXL2000 Expand Serial Command Functional Specifications 6.5 Screen Status Read Command Table information for Lamp replacement time Get lamp total running time Get corresponding lamp use time Get Lamp Mode status Get lamp lighting status Get projector total running time Get lamp number 6.7
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 15
    PDG-DXL2000 Expand Serial Command Functional Specifications CR_FANCONTROL[CR] CR_FILH[CR] CR_FILREPL[CR] CR_FILTIMER[CR] Get selected Fan Control Mode Get Filter used time Get the information for Filter replacement time Get time when Filter warning OSD is displayed 6.9 Other Status Read Command
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 16
    PDG-DXL2000 Expand Serial Command Functional Specifications 7. Error Code Table Error Code ? Details -When the received data cannot be decoded -Parameter determination error (digit number error, including
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 17
    PDG-DXL2000 Expand Serial Command Functional Specifications 8. Functional Execution Command 8.1 Format 1. PC %1 : Parameter (Character line) _ : Space (To separate COMMAND and Parameter) 2. The projector decodes the received command and when it is ready to receive the next command, it returns the
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 18
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.4 Image Command 8.4.1 CF_BRIGHT Command Current Color setting value - 1 Details Set Color value of user control The value set by this command will not be saved to projector. Therefore, when turning into Standby status or ALL is
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 19
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.4.5 CF_SHARP Command Command "CF_SHARP_%1"[CR] "000~015 Directly select Sharpness setting value %1 "UP Current Sharpness setting value + 1 "DN Current Sharpness setting value - 1 Details Set Sharpness value of user control The
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 20
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.4.8 CF_COLTEMP Command Command "CF_COLTEMP_%1"[CR] "000" ------ Power ON status) The value set by this command will not be saved to the projector. Therefore, when turning into Standby status or ALL is OFF, the value returns to
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 21
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.4.11 CF_IMAGE Command Command "CF_IMAGE_%1"[CR] user) "CUSTOM2" ----- Image2 (the value set and stored by a user) "CUSTOM3" ----- Image3 (the value set and stored by a user) "CUSTOM4" ----- Image4 (the value set and stored by a user
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 22
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.5 PC Adjust Control Command 8.5.1 Details Set Fine Sync value of PC signal The value set by this command will not be saved to projector. Therefore, when turning into Standby status or ALL is OFF, the value returns to original setting.
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 23
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.5.4 CF_H - POS Command Command "CF_H-POS_%1"[CR] Vertical Position value of PC signal The value set by this command will not be saved to projector. Therefore, when turning into Standby status or ALL is OFF, the value returns to original
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 24
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.5.7 CF_PCMODEFREE Command Command "CF_PCMODEFREE_%1"[CR] "MODE1" ------ Set Mode1 to Free status "MODE2" ------ Set Mode2 to Free status "MODE3" ------ Set Mode3
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 25
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command " currently selected Input When Input specified by %1 is inappropriate for selected Input, the projector returns "101" and the command is not executed. This command is available in
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 26
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.6.3 CF_INPUT1 Command Command "CF_INPUT1_%1_"[ source specified in %1 at once. This command is available in normal Power ON status. Projector returns "101" by selecting Computer 2 while Monitor out is selected in Terminal menu.
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 27
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.6.8 CF_INPUT_%1_%2 Command Command "CF_INPUT_%1_%2"[ currently selected Input When SYstem specified by %1 is inappropriate for selected Input, the projector returns "101"[CR] and the command is not executed This command is available in
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 28
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.1 CF_SCREEN Response Select image size on screen. When Input specified by %1 is inappropriate for selected Input, the projector returns "101" [CR] and the command is not executed. "DZOOM UP" and "DZOOM DN
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 29
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.7.3 CF_KEYSTONE Command Command "CF_KEYSTONE_%1"[CR] changed into Custom by receiving this command. Note2) When there is no Input, projector returns 101 and the command does not execute. Acceptable "000"[CR] Response Unacceptable "Error Code
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 30
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.7.6 CF_VPOS Command Command "CF_VPOS_%1"[CR] "015 15 "014 changed into Custom by receiving this command. Note2) When there is no Input, projector returns 101 and the command does not execute. Acceptable "000"[CR] Unacceptable "Error
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 31
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.7.8 CF_HPOS Command Command "CF_HPOS_%1"[CR] "015 15 "014 is changed into Custom by receiving this command. Note2) When there is no Input, projector returns 101 and the command does not execute. Acceptable "000"[CR] Unacceptable "Error
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 32
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.7.11 CF_COLBOARD Command Command "CF_COLBOARD_%1"[CR] "OFF Select OFF "RED Select Red %1 "BLUE Select Blue "YELLOW Select Yellow "GREEN Select
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 33
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.8 Lamp Command 8.8.1 CF_LAMPH Command Command "CF_LAMPH_%1"[CR] %1 "RST" Details Reset Lamp use time counter. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.8.2
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 34
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.9 Sound Command 8.9.1 CF_VOLUME Command Command " is canceled just like RC operation. The value set by this command is stored in Projector. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 35
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10 Setting Command 8.10.1 CF_LANG Command Command "CF_LANG_%1"[CR] "ENG Select English "DEU Select German "FRA Select French "ITA Select
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 36
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10.3 CF_AUTOSETUPPCADJ Command Command " ON status. Note) It is unable to set both PC ADJ. and Input search to OFF. If projector receives Auto PC ADJ. OFF command while Input search is OFF, it returns error code "101". Response
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 37
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10.7 CF_3DSYNC Command Command "CF_3DSYNC_%1"[CR] %1 "1 Select 1 "2 Select 2 Details Setup 3D Sync. The status set by this command is stored
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 38
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10.11 CF_BACKGND Command Command "CF_BACKGND_%1" [CR] "BLUE Select Blue Back "USER Select User %1 "BLACK Select Black Back "UP The same operation as pressing Up key or Left key "DN" ---------- Details Set Screen status for
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 39
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10.13 CF_LOGO Command Command "CF_LOGO_%1_%2"[CR] %1 "0000"-"9999 Set LOGO PIN CODE directly "OFF Disable Logo function "DFLT Display Default Logo %2 "USER .) Response Projector returns Error Code "101" by receiving USER in %2
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 40
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10.16 CF_TERMINAL Command Command "CF_TERMINAL_%1"[CR "000"[CR] Response "Error Code"[CR] Unacceptable When Input is Computer 2, the projector returns "101" and the command is not executed. 8.10.17 CF_STANDBYMODE Command Command
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 41
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10.20 CF_ON-STA Command Command "CF_ON STA_%1"[CR] "ON Set Direct on active "OFF Set Direct on inactive %1 "UP
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 42
    PDG-DXL2000 Expand Serial Command Functional CF_KEYDIS_%1"[CR] "NONE RC & Projector keys are valid (All are valid) %1 "RC RC keys are invalid "KEY Projector keys are invalid Details (This every time lamp turns on. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 41/72
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 43
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10.26 CF_FANMODE Command Command "CF_FANMODE_ The same operation as pressing Down key or Right key Details Set timer of Filter warning display. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.29CF_FILH Command Command
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 44
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.10.30CF_FDEFAULT Command Command "CF_FDEFAULT_%1"[CR] %1 "RST" Details Set the value to Factory Default This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 43/72
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 45
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.11 Other Command 8.11.1 CF_KEYENU Select key. "AUTOPC Execute Auto PC adj. Details This command behave the same as corresponding RC/Projector keys Once Auto PC adj. is started with "AUTOPC" command, it does not stop with receiving
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 46
    PDG-DXL2000 Expand Serial Command Functional Specifications 8.11.4 CF_FREEZE Command ) Note) "UP" and "DN" behave the same. Details Set/Cancel Freeze setting. Although projector returns "000", receiving another Freeze command does not release Freeze operation. This command is available in
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 47
    PDG-DXL2000 Expand Serial Command Functional Specifications 9. Status Read Command 9.1 Format 1) PC issues commands in format as below: "CR_Command" [CR] Command: Character Line 2) When projector receives the appropriate command, it returns a character line as the required data "000 "%1 [CR] %1:
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 48
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.4 Image Status Read Command 9.4.1 CR_BRIGHT Command Command "CR_BRIGHT"[CR] Details Get Brightness value of user Command Command "CR_COLOR"[CR] Details Get Color value of user control Response Acceptable %a "000_%a"[CR] "000"~"063
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 49
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.4.6 CR_GAMMA Command Command "CR_GAMMA"[CR] Details Get Gamma value of user control Acceptable "000_%a"[CR] "DFLT Default is selected. "18 1.8 is selected. Response %a "20 2.0 is selected. "22 2.2 is selected. "24 2.4 is
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 50
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.4.11 CR_NZRED Command Command "CR_NZRED"[CR] Details Get setting status of Noise Reduction Acceptable "000_%1"[CR] "L1" -------- Noise Reduction for
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 51
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.5 PC Adjust Status Read Command 9.5.1 CR_FSYNC Command Command "CR_FSYNC"[CR] Details Get Fine Sync value Response Acceptable %a "000_%a"[CR] "0000"~"
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 52
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.5.6 CR_PCSTORE Command Command "CR_PCSTORE"[CR] Details Get Free/Stored status of MODE1 - MODE10 for PC Adjust The data consists of
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 53
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.6 Video Status Read Command 9.6.1 CR_SERSYS Command Command "CR_SERSYS"[CR] Details Get currently selected signal Returns auto-detected signal in Auto
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 54
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.7 Input Status Read Command 9.7.1 CR_INPUT Command Command "CR_INPUT"[CR] Details Get selected INPUT No. Acceptable "000_%1"[CR] Response Request data "1"-"5"
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 55
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.7.6 CR_SRCINP4 Command Command "CR_SRCINP4" [CR] Details Get selected source of Input 4_Video Acceptable "000_%1"[CR] Response Request data "VIDEO Composite
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 56
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.7.8 CR_SYSTEM Command Command "CR_SYSTEM 720p is selected "D 575P D-575p is selected "D 480P D-480p is selected When there is no signal, projector returns error code"101" [CR] Input is Y,Pb/Cb,Pr /Cr "1080i 1080i is selected "
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 57
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.7.9 CR_SYSLIST Command Command "CR_SYSLIST"[CR] Details Get selectable System titles Acceptable "000_%1_%2_..._%x" [CR] - When Input is PC-Analog "XGA1 XGA1is selectable "1080I 1080i is selectable Projector does not return Auto, Mode
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 58
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.8 Screen Status Read Command Zoom mode i s selected "TRUE True mode is selected When the screen is set to D.Zoom, projector returns the previous Response %a status (NORMAL ) "CUSTOM Custom mode is selected Input is Video "NORMAL
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 59
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.8.5 CR_HSCALE Command Command "CR_HSCALE"[CR] Details Get setting status of Horizontal Scale Store Mode Response Acceptable %1 "000_%1"[CR] "-32" ~ "032"
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 60
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.9 Lamp Status Read Command 9.9.1 CR_LAMPREPL Command Command "CR_LAMPREPL"[CR] Details Get information of Lamp Replacement time Acceptable "000_%1"[CR] "1Y Over lamp replacement time "1N Within lamp replacement time Response %1 "1"
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 61
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.9.5 CR_LAMPMSTS Command Command "CR_LAMPSTS"[CR] Details Get Lighting status of lamp Acceptable "000_%1"[CR] " **** " A number of * should be among 1-4. First character shows how many lamps are incorporated in projector. (1,2 or 4 )
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 62
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.10 Sound Status Read Command 9.10.1 CR_VOLUME Command Command "CR_VOLUME"[CR] Details Get Volume value of user control Response Acceptable %a "000_%a"[CR] "000"~"063" Unacceptable "Error code"[CR] 9.10.2 CR_MUTE Command Command
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 63
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.11 Setting Status Read Command 9.11.1 CR_LANG Command Command "CR_LANG"[CR] Details Get selected language Acceptable "000_%a"[CR] "ENG Select
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 64
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.11.4 CR_ DSET Command Command "CR_3DSET"[CR] Details Get setting status of 3D function Acceptable "000_%a"[CR] "ON On is
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 65
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.11.9 CR_BACKGND Command Command "CR_BACKGND" [CR] Details Get setting status of Screen for no signal Acceptable "000_%1" [CR] Response "BLUE Blue Back is selected %1 "USER User is selected "BLACK Black Back is selected
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 66
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.11.14 CR_TERMINAL Command Command "CR_TERMINAL" [CR] Details Get setting status of Terminal Acceptable "000_%1"[CR] Response %1 "COMPUTER Computer Input
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 67
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.11.19 CR_CCAPTIONDISP Command Command " status of RC/Projector keys (valid or invalid) Acceptable "000_%a"[CR] "NONE RC / Projector keys are valid Response %a "RC RC keys are invalid "KEY Projector keys are invalid
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 68
    PDG-DXL2000 or ON-2 on Menu, and PJ PIN CODE is not entered so that projector is actually locked. Response %1 "FREE PJ Lock is released. PJ Lock status ] 9.11.28 CR_FILH Command Command "CR_FILH"[CR] Details Get Filter used time Response Acceptable %1 "000_%1"[CR] "00000"~"99999 0
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 69
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.11.29 CR_FILREPL Command Command "CR_FILREPL"[CR] Details Get the information of Filter replacement time Acceptable "000_%1"[CR] Response %1 "1Y Over filter replacement time "1N Within filter replacement time Unacceptable "Error
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 70
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.12 Other Status Read Command 9.12.1 CR_STATUS Command Command "CR_STATUS"(CR) Details Get status of Projector "21"= Cooling down due to Lamp failure "81"= Stand by after Cooling down due to Lamp failure Unacceptable "Error Code"[CR]
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 71
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.12.5 CR_ PTIMER Command Command "CR_ CR] 9.12.6 CR_TEMPWARN Command Command "CR_TEMPWARN"[CR] Details Get the temperature inside a projector and its condition if it is abnormal temperature or close to abnormal temperature If there
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 72
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.12.7 CR_TEMP Command Command "CR_TEMP"[CR] Details Get current temperature inside a projector. such as "_00.0E". Some of the projectors get abnormal temperature because of heat of Lamp ballast in Standby mode or Powering ON. Therefore
  • Sanyo PDG-DXL2000 | RS232C Expand - Page 73
    PDG-DXL2000 Expand Serial Command Functional Specifications 9.12.8 CR_TEMPFAIL Command Command "CR_TEMPFAIL"[CR] Details Get the temperature inside a projector When the projector is reset, "□000S" is set, and every time abnormal temperature occurs, it renews the data and returns it. In short, it
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
EXPAND SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PDG-DXL2000
Ver. 1.00
SANYO Electric Co., Ltd
DS Company
Projector Division