Sanyo PLC-EF60A User Manual
Sanyo PLC-EF60A Manual
 |
View all Sanyo PLC-EF60A manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo PLC-EF60A manual content summary:
- Sanyo PLC-EF60A | User Manual - Page 1
Multimedia Projector MODEL PLC-XF60A PLC-EF60A ✽ Projection lens is optional. Owner's Manual - Sanyo PLC-EF60A | User Manual - Page 2
technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compatibility The projector widely accepts various video and computer input signals including - Sanyo PLC-EF60A | User Manual - Page 3
Manual Lens 64 Cleaning the Projector Cabinet 64 Attaching the Cord Cover Strap 64 Indicators and Projector Condition 65 Main Indicators 65 Shutter Indicator 66 Warning Filter Indicator 66 Lamp Replace Indicators 67 Appendix 68 Troubleshooting 68 Compatible Computer Specifications - Sanyo PLC-EF60A | User Manual - Page 4
operate improperly, read this manual again, check operations and cable connections and try the solutions in the "Troubleshooting" section in the end of this booklet. If the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC - Sanyo PLC-EF60A | User Manual - Page 5
or sold with the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the . Refer all servicing to qualified service personnel. Unplug this projector from wall outlet and refer servicing to qualified service personnel under the - Sanyo PLC-EF60A | User Manual - Page 6
Safety Instructions Air Circulation Openings in the cabinet are provided for Setup In Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector is allowed to project the picture - Sanyo PLC-EF60A | User Manual - Page 7
about transporting the projector by courier or any other transport service, consult your dealer. REMOVE LENS FROM THE PROJECTOR WHEN CARRYING. OTHERWISE, IT MAY CAUSE SERIOUS DAMAGE TO LENS AND THE PROJECTOR. WHEN TRANSPORT OR STORE THE PROJECTOR WITHOUT LENS, REPLACE THE LENS COVER PLATE INITIALLY - Sanyo PLC-EF60A | User Manual - Page 8
if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation countermeasures. AC Power Cord Requirement The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC - Sanyo PLC-EF60A | User Manual - Page 9
Lens (Option) e Front Cover (inside Terminals) r Carrying Handle t Air Exhaust Vent CAUTION Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side. CAUTION This projector Do not cover vent slots. ● Keep projector sides clear of any objects. Obstructions may - Sanyo PLC-EF60A | User Manual - Page 10
high. (p.60, 65) e WARNING FILTER indicator Lights orange when the projector's filter is clogged with dust. (p.61, 66) r LAMP indicator - Lights red when the projector is in the stand-by mode. - Turns a dim lighting when the projector is turned on. (p.65~67) t READY indicator - Lights green when - Sanyo PLC-EF60A | User Manual - Page 11
INFORMATION SHUTTER P POWER !2 !1 !0 o i q LENS SHIFT button Activates the Lens shift function. (p.29) u INPUT button Switches input sources POWER ON-OFF button Cancels the selection and returns to the previous menu. Turns the projector on or off. (p.27, 28) r Point buttons (e, d, 7, and 8) - Sanyo PLC-EF60A | User Manual - Page 12
Preparation Terminals w INPUT 1 q DIGITAL (DVI-D) ANALOG IN ANALOG OUT r INPUT 2 G B R H/V V INPUT 3 S-VIDEO VIDEO/Y Cb/Pb Cr/Pr e VIDEO/Y Cb/Pb Cr/Pr q INPUT 1 terminals e INPUT 3 terminals DIGITAL (DVI-D) (HDCP compatible) Connect digital output signal from a computer or video - Sanyo PLC-EF60A | User Manual - Page 13
USB (Series B) This port is used for the projector maintenance. y SERIAL PORT OUT This terminal outputs signal from SERIAL PORT IN. When controling cross cable (commercially available). u SERIAL PORT IN When controling the projector from a computer, connect the computer to this terminal with a serial - Sanyo PLC-EF60A | User Manual - Page 14
Zoom +/- function. (p.32) w KEYSTONE button Corrects keystone distortion. (p.31) u POWER ON-OFF button Turns the projector on or off. (p.27, 28) e LENS SHIFT button Activates the LENS SHIFT function. (p.29) i FOCUS buttons Adjust focus of the image. (p.29) r CONTROL PAD (semiconductive touchpad - Sanyo PLC-EF60A | User Manual - Page 15
Preparation SHUTTER D.ZOOM ON-OFF KEYSTONE LENS SHIFT ZOOM FOCUS Preparation i CANCEL o MENU INFO AUTO PC q !0 w FREEZE SCREEN or closes the On-Screen Menu. (p.33, 34) o INFO button Displays the projector information. (p.30) w FREEZE button Freezes the projected picture. (p.31) !0 AUTO - Sanyo PLC-EF60A | User Manual - Page 16
remote control does not emit radio signal. SHUTTER D.ZOOM ON-OFF KEYSTONE LENS SHIFT ZOOM FOCUS Remote Control Channel and ID Setup Initial Remote Control same as those for the projector. When changing the CH and ID settings to the remote control, do it to the projector as well. Refer to "Remote - Sanyo PLC-EF60A | User Manual - Page 17
operation, relocate other radio equipment using 2.4 GHz band away from the remote control and the projector. Remote Control Battery Installation 1 Open the battery compartment lid. Press the lid downward and slide an incorrect type. ● Dispose of used batteries according to the instructions. 17 - Sanyo PLC-EF60A | User Manual - Page 18
setting up the projector, install optional lens in the projector. Install the lens following the instructions in the Lens Installation Manual provided. Ask the sales dealer for detailed information of optional lens specifications. Do not move the projector with holding the lens mounted and its - Sanyo PLC-EF60A | User Manual - Page 19
to move the position of the projected image vertically by 50% and horizontally by 10% respectively without any image distortion. ✽ Lens shift range varies depending on lens and projectors. The range in this manual is the case of LNS-W04. 50% 10% 10% 50% Installation Level Adjustable Feet This - Sanyo PLC-EF60A | User Manual - Page 20
electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of type of the power being supplied. Connect the projector with all peripheral equipment before turning it on. (Refer to pages 22~24 for connection.) CAUTION For - Sanyo PLC-EF60A | User Manual - Page 21
forward. To put back the front cover to the projector, insert the left part of the cover into the projector and then push the entire cover. Make sure uncover the slot. Insert an interface board into the slot along with the guides inside to fit the socket into the inside plug. Secure the board with - Sanyo PLC-EF60A | User Manual - Page 22
(HDB 15 pin) (Only one cable is supplied.) w DVI-D Cable ✽ e BNC Cable ✽ r Serial Cross Cable (RS-232C Not supplied with this projector.) PC Serial Port r✽ Monitor Output Monitor Output Monitor Input Monitor Output w✽ q q e✽ ANALOG IN ANALOG OUT R G B H/V V DIGITAL (DVI-D) SERIAL PORT IN - Sanyo PLC-EF60A | User Manual - Page 23
Equipment (Digital and Video) Cables used for connection q Video Cable w S-Video Cable e DVI-D Cable ✽ Cables are not supplied with the projector. Installation Digital Output (HDCP compatible) Video Output e q S-Video Output w DIGITAL (DVI-D) VIDEO INPUT 3 S-VIDEO VIDEO/Y Cb/Pb Cr/Pr - Sanyo PLC-EF60A | User Manual - Page 24
Connecting to Video Equipment (Component and RGB Scart) Cables used for connection q BNC Cable w Scart-VGA Cable e Component Cable ✽ Cables are not supplied with the projector. Component Video Output (Y, Pb/Cb, Pr/Cr) q Y Cb/Pb Cr/Pr RGB Scart 21-pin Output Component Video Output (Y, Pb/Cb, Pr/Cr - Sanyo PLC-EF60A | User Manual - Page 25
cable when operating the remote control as wired. Mouse Operation USB terminal Basic Operation Connect the USB terminal on the projector and a USB mouse when operating the projector's menu with the USB mouse. A mouse cursor appears on the screen with the mouse connected. Mouse operation offers the - Sanyo PLC-EF60A | User Manual - Page 26
on this page, follow the respective menu operations described later. Operations & Buttons Top Control LENS SHIFT MENU ZOOM CANCEL FOCUS SELECT AUTO PC ADJ. INPUT INFORMATION SHUTTER P POWER On-Off Lens Shift Zoom Focus Shutter Auto PC Adjust Input Selection Information Keystone Screen Selection - Sanyo PLC-EF60A | User Manual - Page 27
projector is locked with a PJ PIN code, PJ PIN code Input Dialog Box will appear. Enter the PIN code as instructed manual, and keep it at hand. Should the PIN code be missing or forgotten, consult your sales dealer or the service station. After the OK icon disappears, you can operate the projector - Sanyo PLC-EF60A | User Manual - Page 28
or the remote control, and a message "Power off?" appears on the screen. 2 Press the POWER ON-OFF button again to turn off the projector. The LAMP indicator brightly lights red and the READY indicator goes out. After approximately 90 seconds, the READY indicator will light green again and then the - Sanyo PLC-EF60A | User Manual - Page 29
Press the SHUTTER button to close the shutter inside the projector. To open up the shutter, press the SHUTTER button again. Refer to pages 53~54 for detail of setting for the Shutter function. Remote Control SHUTTER D.ZOOM ON-OFF KEYSTONE LENS SHIFT ZOOM FOCUS SHUTTER button ✔Note: • The SHUTTER - Sanyo PLC-EF60A | User Manual - Page 30
function. When the image is not provided properly with this operation, manual adjustments are required. (p.41, 42) • Auto PC Adjustment function /INFO button again. Use this menu to check the projector's operating condition when you face troubles in operation. Refer to the Information menu on page - Sanyo PLC-EF60A | User Manual - Page 31
the Point buttons (e, d, 7, and 8) or the Control pad. The Keystone adjustment can be memorized. (p.48) ✔Note: Horizontal keystone is ineffective for PLC-EF60A. Basic Operation • The arrows are white when there is no correction. • The arrows disappear at the maximum correction. • The direction of - Sanyo PLC-EF60A | User Manual - Page 32
Basic Operation D. Zoom +/- Function D. Zoom + Press the D. ZOOM button on the remote control once and then expand the image size with the SELECT button and pan the image with the Point buttons (e, d, 7, and 8) or the Control pad. D. Zoom - Press the D. ZOOM button on the remote control twice and - Sanyo PLC-EF60A | User Manual - Page 33
adjustment and setting procedure. Top Control Operation 1 Press the MENU button on the projector's top control to display the On-Screen Menu. 2 Press the Point buttons SELECT button LENS SHIFT MENU ZOOM CANCEL FOCUS SELECT Point buttons Remote Control SHUTTER D.ZOOM ON-OFF KEYSTONE LENS SHIFT ZOOM - Sanyo PLC-EF60A | User Manual - Page 34
Basic Operation On-Screen Menu SELECT button Menu icon Guide Currently selected menu. Control bar for Mouse Operation This bar appears when a USB mouse is connected to the USB terminal of the projector. Mouse cursor When clicking 77 or 88 on the control bar, menu icons rotate fast. When clicking 7 - Sanyo PLC-EF60A | User Manual - Page 35
. IMAGE ADJ. : adjusts each picture component of the projected image in detail and 44~46 store the adjusted image data in the projector to reproduce the customized image quality anytime. SCREEN SETTING : selects screen aspect, adjusts vertical and horizontal scales, picture 47~48 position, sets - Sanyo PLC-EF60A | User Manual - Page 36
digital entertainment content delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP. 36 - Sanyo PLC-EF60A | User Manual - Page 37
Input Input 2 Move a pointer to Input 2 and press the SELECT button. RGB When the input source is analog coming from a computer through the Input 2 (5 BNC-type: Red, Green, Blue, H. Sync., and V. Sync.) terminal, select RGB. Video When video input signal is connected to the Input 2 (VIDEO) - Sanyo PLC-EF60A | User Manual - Page 38
. (See "Troubleshooting" on page 68) *SVGA 1 and Mode 1 are examples. PC System Menu The system being selected. System icon Custom Mode (1~50) set in the PC Adjust Menu. (p41, 42) Selecting PC System Manually When the projector has difficulty in recognizing the connected signal conforming - Sanyo PLC-EF60A | User Manual - Page 39
optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If the projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and - Sanyo PLC-EF60A | User Manual - Page 40
parameters Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, the setting can be done just by function. When the image is not provided properly with this operation, manual adjustments are required. (p.41, 42) • Auto PC Adjustment - Sanyo PLC-EF60A | User Manual - Page 41
enables you to precisely adjust several parameters to match those signal formats. The projector has 50 independent memory areas to memorize those parameters adjusted manually. It allows you to recall the setting for a specific computer easily. 1 Press the MENU button to display On-Screen Menu. Spin - Sanyo PLC-EF60A | User Manual - Page 42
Computer Adjustment Position Adjusts picture position. V-sync phase Adjust this item when the projected image is affected by the noise from the external equipment. (From 0 to 15) ✔Note: V-sync phase is not displayed as the item is initially checked off on My menu in the Setting menu. Change the My - Sanyo PLC-EF60A | User Manual - Page 43
and then press the SELECT button. Indicates the other items exists below. Image Menu (AV) For AV Input Standard Normal picture level preset on this projector for AV mode. Cinema Picture level adjusted for picture with fine tone. IMAGE 1~10 User preset picture adjustment in IMAGE ADJ. menu (p.44~ 46 - Sanyo PLC-EF60A | User Manual - Page 44
color level, phase and gamma of the selected spot of the projected image and exchange the original color with the adjusted one. The projector can store up to eight color management data. Color selection Press the SELECT button when Color management is highlighted and then Color management pointer - Sanyo PLC-EF60A | User Manual - Page 45
Image Adjustment Move the pointer to one of the followings with the Point buttons (e, d, 7, and 8) or the Control pad and press the SELECT button. LIST displays Color Management List window to store the adjustment data. COLOR.M ..returns to the previous image with the Color management pointer. - Sanyo PLC-EF60A | User Manual - Page 46
video signal is displayed in a progressive picture. Film This function is effective on 2:3 or 2:2 pulldown video sources. With this function "On," the projector reproduces pictures faithful to the original film quality. Store To store the adjustment data, move an yellow frame pointer to Store and - Sanyo PLC-EF60A | User Manual - Page 47
the horizontal size of the screen size. When the input signal is SXGA (5:4), the image is fully displayed at 4:3 aspect ratio. Custom : The adjusted aspect can basically be memorized for each input even if the projector is turned off. Screen Setting Menu Screen Setting icon Screen (Custom) Aspect - Sanyo PLC-EF60A | User Manual - Page 48
reversed. This function is used to project the image from a ceiling mounting the projector. Rear When this function is "On," the picture is left/right the source to the projector. • The image data in other than XGA (1024 x 768 for PLC-XF60A) or SXGA (1400 x 1050 for PLC-EF60A) is modified to fit - Sanyo PLC-EF60A | User Manual - Page 49
Setting Setting Setting changes various settings: Language, Menu, Logo, Background, Lamp, Remote control, Display, Input search, Power management, On start, Analog out, Lens memory, Shutter, Security, and Factory default. 1 Press the MENU button to display On-Screen Menu. Spin Menu icons with the - Sanyo PLC-EF60A | User Manual - Page 50
the projected image, go to the Logo function and set it to "My logo." Then the captured image can be displayed when turning on the projector next time. (p.27) To capture the image, select [Yes]. To cancel the Capture function, select [No]. ✔Note: • Before capturing an image, select Standard in the - Sanyo PLC-EF60A | User Manual - Page 51
consumption and extends the lamp life. Mode This projector is equipped with two lamps. Mode setting allows you to switch using one (1) lamp or two (2) lamps. 2-Lamp . . . .light both of the lamps inside the projector. 1-Lamp . . . .light one lamp only. Auto, Lamp 1, or Lamp 2 can be altered. ✔Note - Sanyo PLC-EF60A | User Manual - Page 52
last selected input source in the Input menu differs from the detected input source, the projector may not display the image properly. Power management For reducing power consumption as well as maintaining the lamp life, the Power Management function starts the count down when the input signal is - Sanyo PLC-EF60A | User Manual - Page 53
service station for available lens. • 100% accurate lens memory is not guranteed. If an accurate lens position, zoom and focus cannot be obtained with Lens memory function, adjust them respectively in each case. Lens opening up the shutter inside the projector. Each setting for the Shutter function - Sanyo PLC-EF60A | User Manual - Page 54
Should the POWER button be pressed in this condition, the projection lamp is turned on and the SHUTTER indicator turns off. ✔Note: manual enclosed with the USB key for detail operation of the USB lock. ✔Note: • USB lock cannot be selected when the optional USB key is not connected to the projector - Sanyo PLC-EF60A | User Manual - Page 55
lock settings. If you entered a wrong PIN code, the number turns red and disappear. Enter a PIN code all over again. Enter a PIN code When the projector is locked with the PIN code, the PJ lock mark appears at top left of the Main menu. The input numbers change to "✳" for security - Sanyo PLC-EF60A | User Manual - Page 56
function returns all setting values to the factory default settings except for those including: User logo, PJ PIN code, Logo PIN code, Security setting, Lamp time, Filter time, and PJ time. Quit Exits the Setting menu. Factory default Select Factory default and this box appears. Select [Yes], and - Sanyo PLC-EF60A | User Manual - Page 57
the SELECT button. ✔Note: Option box cannot be selected when it is not mounted on the projector. For the information of the Smoke Resist Box, refer to Optional Parts on page 73 and contact the sales dealer or the service station. Filter Move the pointer to Reset and then press the SELECT button - Sanyo PLC-EF60A | User Manual - Page 58
. . . . .stores the adjustment data on the USB key connected to the projector. Load recalls the stored data. Delete deletes the stored data. To use the USB sales dealer or service station for purchasing. For further information on USB memory function, refer to the owner's manual that comes with - Sanyo PLC-EF60A | User Manual - Page 59
Warning log Warning log shows the information of the past warning history of the projector. Up to 50 logs can be displayed. Log contents are as follows: Lamp-1 failure Lamp-2 failure Lamp-1 timeover Lamp-2 timeover Power failure Inside temp. A error Inside temp. B error Inside temp. C error External - Sanyo PLC-EF60A | User Manual - Page 60
above checks, the cooling fans or the internal circuits may be malfunctioned. Contact the service station for check-up and repair. All indicators except the LAMP indicator are blinking. When the projector detects an abnormal condition, it is automatically shut down to protect the inside and all - Sanyo PLC-EF60A | User Manual - Page 61
the air filter is clean. ORDER REPLACEMENT FILTER When ordering the replacement air filter, give the following information to the dealer. ● Model No. of your projector : ● Replacement Filter Part No. : PLC-XF60A / PLC-EF60A 610 315 1588 61 - Sanyo PLC-EF60A | User Manual - Page 62
If one of these indicators lights orange, replace the lamp with a new one promptly. CAUTION For continued safety, replace with a lamp of the same type. Do not drop a lamp or touch a glass bulb! The glass can shatter and may cause injury. Allow a projector to cool, for at least 45 minutes before you - Sanyo PLC-EF60A | User Manual - Page 63
to the dealer. ● Model No. of your projector : ● Replacement Lamp Type No. : PLC-XF60A / PLC-EF60A POA-LMP80 (Service Parts No. 610 315 7689) Maintenance & Cleaning LAMP HANDLING PRECAUTIONS This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling - Sanyo PLC-EF60A | User Manual - Page 64
lens. 3 When the projector is not in use, replace the lens cover. Cleaning the Projector Cabinet Follow these steps to clean the projector cabinet Attaching the Cord Cover Strap When mounting the projector on the ceiling, connect the front cover to the projector with the provided cord cover strap - Sanyo PLC-EF60A | User Manual - Page 65
. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, disconnect the AC power cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause electric shock or a fire hazard. LED Conditions - Sanyo PLC-EF60A | User Manual - Page 66
station immediately. The shutter is out of control. (The projector is in the cooling mode.) In this case, contact the service station immediately. Warning Filter Indicator Indicators READY Green LAMP Red WARNING FILTER Orange Projector Condition Slow The air filter is clogged with dust or - Sanyo PLC-EF60A | User Manual - Page 67
with the POWER ON-OFF button.) Fast Both Slow The lamp is not installed in the projector. The lamp of which indicator is lighting has been used overtime. Replace the lamp and then reset the Lamp time. The indicator will turn off. Either lamp cover is not replaced or fit in. Both of the indicators - Sanyo PLC-EF60A | User Manual - Page 68
Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. - Make sure you have properly connected the projector monitor output when connecting to a projector. See your computer's instruction manual for the setting. - It takes about 20 seconds - Sanyo PLC-EF60A | User Manual - Page 69
49) Appendix WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Give the model number and explain about the - Sanyo PLC-EF60A | User Manual - Page 70
Appendix Compatible Computer Specifications Basically this projector can accept a signal from DISPLAY XGA15 MAC 19 MAC 21 SXGA 1 SXGA 2 SXGA 3 SXGA 4 SXGA 5 SXGA 6 SXGA 7 SXGA 8 SXGA 9 SXGA 10 SXGA 11 SXGA 12 SXGA 13 SXGA 14 SXGA 15 SXGA 16 SXGA 17 SXGA 18 SXGA 19 SXGA 20 SXGA 21 MAC MAC WXGA 1 - Sanyo PLC-EF60A | User Manual - Page 71
V-Freq. (Hz) 60.02 58.069 60.00 60.00 60.00 60.00 50.00 Proper image may not be obtained in some signals. Specifications are subject to change without notice. Appendix 71 - Sanyo PLC-EF60A | User Manual - Page 72
Range Dimensions Net Weight Multi-media Projector 20.39" x 9.92" x 23.86" (518mm x 252mm x 606mm) (Not including adjustable feet) 54.3 lbs (24.7kg) 0˚ to 3.65˚ PLC-XF60A 1.4" TFT Active Matrix type, 3 panels 1024 x 768 dots 2,359,296 (1024 x 768 x 3 panels) PLC-EF60A 1400 x 1050 dots 4,410,000 - Sanyo PLC-EF60A | User Manual - Page 73
's Manual (CD-ROM + Quick Reference Guide) AC Power Cord Remote Control and Batteries VGA Cable Lens Attachment Light Block Plates (2 types) Real Color Manager Pro (CD-ROM) Cord Cover Strap Security Label (PIN Code/USB Key) ● The specifications are subject to change without notice. ● LCD panels - Sanyo PLC-EF60A | User Manual - Page 74
Appendix Menu Tree INPUT Input 1 Input 2 Input 3 Input 4 Input 5 RGB (PC Analog) RGB (Scart) RGB (PC Digital) RGB (AV HDCP) RGB Video Y, Pb/Cb, Pr/Cr Video Y, Pb/Cb, Pr/Cr S-Video Optional Slot Optional Slot System (1) Auto System (1) System (1) System (1) System (2) System (3) System (2) - Sanyo PLC-EF60A | User Manual - Page 75
1-Lamp ID 1- 8 Off/On Off/On Off/Ready/Shut down 1 ~ 60 minutes Auto Lamp1 Lamp2 On start Analog out Lens memory Shutter Security Factory default Quit Off/On Off/On Input 1-5 Off Level Memory Normal High contrast Protection Management Remote control Projector 5 ~ 180 minutes Key lock - Sanyo PLC-EF60A | User Manual - Page 76
control Filter Auto PC adj. Test pattern RS-232C USB memory Warning log Quit Lamp 1 Lamp 2 Normal W Hour(s) Reset W Hour(s) Reset Yes/No Yes/No Max Projector Option box Off/On Cross 1 (W) Cross 2 (R) Cross 3 (G) Cross 4 (B) Cross 5 (M) Cross 6 (C) Cross 7 (Y) Gradation 1~4 Color Flat 1~8 Baud - Sanyo PLC-EF60A | User Manual - Page 77
Dimensions Unit : inch (mm) 9.92 (252) 20.39 (518) Appendix 7.24 (184) 5.31 (135) 3.65˚ (Max.) 23.86 (606) Appendix 18.11 (460) 13.58 (345) 14.52 (369) Screw Holes for Ceiling Mount Screws: M8 Depth: 0.31(8.0) 2.36 (60) 18.27 (464) 9.15 (232.5) 9.15 (232.5) 1.08 (27.5) 77 - Sanyo PLC-EF60A | User Manual - Page 78
Appendix Terminal Configurations ANALOG INPUT / OUTPUT TERMINAL (ANALOG) Terminal: HDB15-PIN 54 32 1 10 9 8 7 6 15 14 13 12 11 1 Red (R/Cr) Input / Output 2 Green (G/Y) Input / Output 3 Blue (B/Cb) Input / Output 4 ----- 5 Ground (Horiz.sync.) 6 Ground (Red) 7 Ground (Green) 8 Ground ( - Sanyo PLC-EF60A | User Manual - Page 79
Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set - Sanyo PLC-EF60A | User Manual - Page 80
K Keylock 54 Keystone 26, 31, 48 L Lamp 51, 57 Lamp Control 51 Lamp Mode 51 Lamp Replace Indicator 67 Lamp Replacement 62 Language 50 Lens Installation 18 Lens memory 53 Lens Shift 2, 19, 26, 29 Logo 50 Logo Lock 50 Logo PINcode 50 Logo Select 50 M Manual PC Adjust 41 Menu 49 Menu - Sanyo PLC-EF60A | User Manual - Page 81
53 Simple menu 49 Smoke Resist Box 73 Special 57 Specifications 72 T Telecine 45 Terminal Configurations 78 Terminals 12, 21 Test pattern 58 Top Control 9, 11 Troubleshooting 68 True 47 Turning Off the Projector 28 Turning On the Projector 27 U USB CONNECTOR 78 USB Key 73 USB lock 54 - Sanyo PLC-EF60A | User Manual - Page 82
Printed in Japan Part No. 610 327 9398 (1AA6P1P5077-- KH6A) SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
 |
 |
Owner's Manual
PLC-XF60A
PLC-EF60A
Multimedia Projector
MODEL
✽
Projection lens is optional.